• Journal of Industrial Technology
• /
• v.7
• /
• pp.49-58
• /
• 1987

To investigate the effect of the Retrogression and Reaging (RRA) treatment on the strength and the stress corrosion cracking in AA 7039 the measurement of hardness, tensile properties and the time to failure in a constant rate method were measured. Transmission electron microscope was used to examine the microstructural changes within graln and grain boundary. The results show that the RRA treatment of the T6 condition results in a significant increase in the time to failure without sacrifying the original T6 strength. It is believed that high density and even distribution of precipitates in RRA condition were observed within grain so that the RRA condition could have similar strength to the T6 condition. The presence of fine dispersion of semicohernt ${\eta}^{\prime}$ transition phase is also believed to contribute to that effect. Examination of the grain boundary microstructure shows that the RRA treatments increases significantly the average size of the grain boundary preciptates. It is suggested that the benificial effect of the RRA treatment on the susceptibility to SCC be due to the increase in the size of grain boundary precipitates obtained during the retrogression treatment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.2
• /
• pp.25-33
• /
• 2002

We were trying to understand indirectly the range of the discharge from the Nakdong with the dispersion of suspended solid(SS) related to the amount of discharge from river in this study. The range of dispersion of SS from the Nakdong was estimated using satellite remote sensing and numerical modeling. The stream field with two dimensional and numerical model using the condition of integrated depth was calculated. According to the results, the streamline flowed from Busan to the Jinhae Bay and Geojae Island. at the flood. The situation at the ebb was totally changed. The streamline flowed out Busan from the Bay. The velocity in offshore was faster than one at coastal water of the Nackdong. Residual current which was averaged during 12hours dominantly appeared the dominant direction from the southwestern part of the Nackdong to the northeastern part of it. The eastward current appeared at the eastern coast of Gaduck Is. Base on the results of the velocity field, the quantifying of the dispersion of SS was estimated by the method of numerical tracer related to the Lagrangian method. The significant range of the dispersion of the SS from the Nackdong was from the eastern coast of Gaduck Is, to the coastal areas of Busan, Korea. The estimated range of the dispersion of the SS using the SeaWiFS and Landsat satellite data was similar to the estimated results using the numerical model.

• Journal of electromagnetic engineering and science
• /
• v.12 no.4
• /
• pp.280-286
• /
• 2012

The conventionally classified waves are reclassified in this paper, including the waves associated with metamaterial (MTM) transmission lines. Various types of guided waves in periodic structures are analyzed for 1D Composite Right/Left Handed (CRLH) transmission lines (TL). In addition, dispersion diagrams for 1D CRLH, RH, and LH TLs are presented in terms of radiation conditions. We have refined the design equations of the conventional 1D CRLH TL and proposed a condition to realize the desired phase shift and its slope per unit cell. This condition has been applied to the conventional Wilkinson power divider and realized into MTM added $90^{\circ}$ hybrid coupler. Based on the 10 dB return loss and the $90{\pm}10^{\circ}$ phase shift, the bandwidths of the MTM added $90^{\circ}$ hybrid coupler are 82.25% and 103.5% against the conventional 23% and 52.5%, respectively.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.299-302
• /
• 2000

본 연구에서는 원형실린더에 의한 음향파의 산란현상을 전산공력음향학 기법을 이용하여 계산하였다. 특히 전산공력음항학에서 정확도를 위해 요구되는 좌표의 직교성을 유지하기 위해서 그에 대한 적절한 관계식을 유도하였으며 정확성의 검증을 위해서 수치적인 해를 이론적인 해와 비교, 분석하였다. 공간차분법으로는 Taylor 전개를 통하여 차 정확도를 가진 차분법을 바탕으로 주파수 공간에서 최적화 된 DRP(Dispersion Relation Preserving) 기법을 사용하였으며, 시간차분법으로는 Adams-Bashford 방법을 기준으로 최적화된 4단계 외재적(explicit) 적분방법을 사용하였다 벽면 경계조건으로는 가상점 개념을 이용한 경계조건을 사용하였으며 원방 경계조건으로서는 선형화 된 Euler 방정식의 점근해(Asymptotic Solution)을 이용한 방사경계조건(Radiation Boundary Condition)을 사용하였다.

• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.81-89
• /
• 2002

The runaway reaction was analyzed experimently and theoretically at the batch styrene suspension polymerization process. In the experiments, the reaction temperature with time was measured at various experimental conditions. According to the experimental results, the risk of the runaway reaction was increased with increasing the ratio of the monomer(styrene, M) to the dispersion medium(water, W), the concentration of the initiator(BPO), and the monomer mass, respectively. And simulation results showed that the runaway reaction was significantly affected by the reaction rate constant of the propagation and that the phenomena of the runaway reaction occurred at about 70% conversion. Also, we found that the runaway reaction did not occur under the operating condition of below 0.5 for M/W, approximate 3 wt% BPO, and below 75$^{\circ}C$ for the cooling temperature.

• Journal of Powder Materials
• /
• v.5 no.2
• /
• pp.122-128
• /
• 1998

NiAl based ODS (Oxide Dispersion Strengthened) intermetallic alloys have been produced by mechanical alloying (MA) process and consolidated by hot extrusion. Subsequent thermomechanical treatments have been applied to induce secondary recrystallization in an attempt to improve creep resistance in this material. The creep behavior of secondary recrystallized MA NiAl has been investigated and compared with those of as-extruded condition. Minimum creep rate were shown to be approximately two orders of magnitude lower than that in as-extruded condition. The improvement in creep resistance is believed due to the grain coarsening, restricting of dispersoid coarsening as well as increase in grain aspect ratio. Creep threshold stress behavior, below which no measurable creep rate can be detected, has been discussed on the basis of particle-dislocation interaction theory. The threshold stress becomes negligible after secondary recrystallization in MA NiAl, presumably due to dispersoid coarsening and a decrease in grain boundary area during secondary recrystallization.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.76.2-76.2
• /
• 2014

The Arches cluster is one of the compact, young, massive star clusters near the center of our galaxy. Since it is located only ~30 pc away in projection from the galactic center (GC), the cluster is an excellent target for studying the effects of star forming environment on, for example, the initial mass function under the extreme condition of GC. To estimate the initial condition of the Arches cluster, we compare our calculation results from the anisotropic Fokker-Planck method with the most recent observational data sets for the surface density and velocity dispersion profiles and the present-day mass function.

• Journal of the Korean Ceramic Society
• /
• v.44 no.10
• /
• pp.548-553
• /
• 2007

Ceramic green sheets consisting Bi-based glass frit were fabricated for an application to PDP transparent dielectric front panel. The dispersion condition of the slurry for tape casting was pre-examined, and two kinds of hinder and plasticizer were used in the non-aqueous slurry system. In the fabrication process for the frit film, the properties such as dry and firing shrinkage, elongation, and transmittance were examined at the condition of various mixing ratio of plasticizers. In the mixing ratio of polyethylene glycol to dibutyl phthalate of 3:5wt%, a good adhesion, elongation and transmittance were observed at the firing temperature of $580^{\circ}C$. The photograph for the cross section of the interface was also showed a dense microstructure.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.187-190
• /
• 2008

The water quality at the Dongbin Harbor at Pohang city, is getting worse due to the sewage and the wastewater from communities. In this syudy, RMA2 and RMA4, which is two-dimensional depth-averaged finite element numerical model, were employed to simulate the improvement of water quality from inflowing water through an inland canal to be planned connecting Dongbin Harbor and the Hyeongsan River. For the comparative result of the numerical model, both the present condition and the restoration condition (after construction of an inland canal) is simulated. The results of these conditions reasonably simulate a real situation at the Dongbin Harbor. After construction of an inland canal, the water quality at the Dongbin Harbor will be compared to the fresh water quality of the Hyeongsan River at the steady state. Futhermore, The result of simulation will be used to decide the most effective dimension of the canal.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.1-6
• /
• 2008

The adhesion behaviors and processability of NBR as a sealing material were investigated. In order to find the optimum formulation, the adhesive properties and processability were observed as the change of the contents of acrylonitrile (ACN) in NBR. Effects of Mooney viscosity, filler, plasticizer and crosslinking agent on the adhesion behaviors were also studied. The contents of ACN in NBR have great effects on adhesion behaviors and processability in NBR sealing. To know the optimum condition of roll mixing, degree of dispersion was investigated. It was confirmed that degree of dispersion was influenced by various factors such as mixing order, time, and temperature. The crosslinking system was studied as the observation of sulfur system, peroxide system, crosslinking density, and structure. From the variation of the dry condition and hexamine contents, the relation between adhesive and NBR was studied. These results show the adhesion properties and processability are dependent on the contents of ACN and crosslinking system.