• Health Policy and Management
• /
• v.10 no.2
• /
• pp.41-77
• /
• 2000

This study aimed at the analysis, from the perspective of rationality, of policy making process in the separation of prescribing and dispensing. This study is to identify the characteristics and problems of the policy process to introduce the new durg-prescription system, and make policy recommendations. In terms of separation of prescribing and dispensing, the development of policy making process can be divided into two periods; periods before and after the inauguration of the govemment of people. In the period before the govermment of poeple, one of the major characteristics of policy decision on the new system was the poweful influence of interset groups. At that time, the ministry lacked the problem-solving ability and commitment on the policy. Consequently, during the former period, the policy making process had been driven by interest groups. Therefore, the original purpose of the policy to secure the pulic health was lost. During the latter period, there was also the strong influence of interst groups, complexity of interest, the ministry's inability of problem solving. However, in this period, it is notable that this has drawn nation-wide attention, severl civic grouos have participated in the policy making process, and that the number and voice of these groups have remarkably increased. With regards to rationality, incrementalish model is highly sutable to explain the policy making process in the former period. But in the latter period when the new drugperscripition system became a national issue and civic groups began to participte in this matter more actively, rational model is more explanatory that incrementalism to understand the process. During the latter period, the original goal of this policy was not distored by a few interest groups thanks to the rapid development of civil movement and therebly a big influence of civic groups on the policy making. For that reson, a jigh level of rationality is found in the policy-making process of the latter period. Some suggestions to achieve the rationality in the policy making process based on the results of this study are as follows; Frist, the public's participation should be enered in the policy making process. Second, the govermment should make contiuns efforts to enhance its ability of long-term planning and policy implementation, and increase rationality of policy making process. Third, balance among interset groups should take place in the process of policy making. Forth, sound, constructive, and logical activity of interest groups is necessary to express and promote their interests.

• Korean Journal of Clinical Pharmacy
• /
• v.25 no.1
• /
• pp.18-26
• /
• 2015

Background: The recent change in pharmaceutical education system following the paradigm shift to patient-oriented pharmacy service requires an in-depth discussion to reorganize a future direction and establish a basis for maximizing social values of community pharmacy service. Objective: This study was conducted to review the current status of community pharmacy service provision in Korea based on published literatures. Methods: The electronic databases of National Digital Science Library and Electronic National Assembly Library were used to search the journal articles and dissertation papers. A search term "community pharmacy" was used and the published period was limited to papers published after year 2001, when the legal separation of prescribing and dispensing was implemented. Relevant study reports were also searched manually. Information about pharmacy service provision and study outcomes were retrieved from the selected papers, and classified by predefined individual service scope. Results: A total 33 papers reporting services provided by community pharmacies were selected (journal article 11, dissertation paper 17, and study report 5). Pharmacy services identified in these papers could be classified into prescription dispensing service, pharmaceutical care service, self medication service, other products service, and health promotion service. Twenty papers reported prescription dispensing services, three papers reported pharmaceutical care service, and only two papers reported health promotion service. Current community pharmacy services are highly dependent on prescription drugs while expanded services such as pharmaceutical care and health promotion are peripheral. Most prevalent research topic was medication counseling service (18 papers), reflecting that community pharmacists generally consider it to be the most important and fundamental service. Overall, current pharmacy services are very limited and focus on prescription dispensing service. Conclusion: At this point of time requiring expansion and quality improvement of community pharmacy services, we suggest further lively discussion to strengthen pharmacist's functional identity and set conditions for providing socially expected services.

• Korea Journal of Hospital Management
• /
• v.6 no.1
• /
• pp.62-84
• /
• 2001

The purpose of the study was to compare patient's satisfaction on the pharmacy services after introducing the new system of separation of dispensing from prescribing medicines, between those filling their prescriptions from the pharmacy nearby hospitals and those from the pharmacy in their resident areas. To measure patient's satisfaction, a questionnaire survey was conducted with 354 outpatients who received prescriptions from any of the three university hospitals located in In-Cheon city. Study results showed that geographic accessibility to pharmacy was a main attribute to select pharmacy. Size of the pharmacy and availability of prescription drugs are the second major reasons for pharmacy selection for the patients from the pharmacy nearby hospital, whereas patronage is the second major reason for those from the pharmacy in resident areas. Overall satisfaction was higher among the patients from the pharmacy in resident areas than those from the pharmacy nearby hospitals, mainly due to better facilities(waiting area, public telephone, etc), kindness, cleanliness, shorter waiting time, and pharmacist's concern about patient's health. On the other hand, the patients of the pharmacy nearby hospitals showed low satisfaction because of long waiting time and the lack of pharmacist's knowledge and information about patients' health status and medication history. Patients visiting the hospital that has pharmacy-hospital cooperation system showed higher satisfaction as compared to those visiting the hospital without such system. This study provided an empirical evidence that it would be more advantageous for patients to receive pharmacy services from pharmacies located in their living areas than from pharmacies nearby hospitals. This implies that there is a strong need for adequate strategies to enhance the role of pharmacies in resident areas under the new system of separation of dispensing from prescribing medications.

• YAKHAK HOEJI
• /
• v.55 no.5
• /
• pp.432-439
• /
• 2011

The effects of characteristics of community pharmacists on consultation time for prescription (RX) and nonprescription drugs (nRX) were investigated. A crosssectional descriptive design was established with a self-administered anonymous mail survey. Response rate was 52%. Significant pharmacists' factors related to having less than 3 minutes consultation for RX were one's dispensing duties exceeding 50%, low satisfaction with one's own level of consultation, working at the pharmacies nearby clinics, or shorter duration of consultation time for nRX. Consultation promoting conditions should be built up for the provision of sufficient consultation.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.75-79
• /
• 2016

Purpose The ASAN Medical Center, Nuclear Medicine performs TSH (Thyroid stimulating hormone) and FT4 (Free Thyroxine) tests 8 times per day. Accordingly, 70 ~ 80 kit tubes are consumed every day for the measurements and the time consumed for reagent dispensing averages over 170 seconds, where the TAT (turnaround time) may be effected when the number of test samples is larger than expected. Therefore, the following test was conducted with the purpose to reduce the number of kit tubes consumed, and reduce the time for reagent dispensing. Materials and Methods The test is based on applying the same reagent for tests where the number of samples is 30 or less. The test for TSH was conducted 9 times from July $1^{st}$ 2015 to July $10^{th}$ 2015. The test for FT4 was conducted 4 times from June $18^{th}$ 2015 to June $22^{nd}$, 2015. Standard Solution No.2 (0.153 uU/mL) and No.5 (4.96 uU/mL) was selected as the two-point standards for the TSH test, and Standard Solution No.3 (0.777 ng/dL) and No.4 (2.044 ng/dL) was selected as the two-point standards for the FT4 test. 38 test samples were subject to correlation analysis. Results For TSH, the result of the normal test shows ranges of 0.20 ~ 0.37 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 6.77 ~ 7.94uU/mL for Control3, while the result of two-point calibration curve test shows ranges of 0.18 ~ 0.27 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 7.30 ~ 8.52 uU/mL for Control3. For FT4, the result of the normal test shows ranges of 0.85 ~ 0.94 ng/dL for Control1 and 4.23 ~ 4.57 ng/dL for Control2, while the result of two-point calibration curve test shows ranges of 0.61 ~ 0.75 ng/dL for Control1 and 3.88 ~ 5.71 ng/dL for Control2. For TSH, the CV% of the normal test for Control1, Control2 and Control3 are 10.5, 3.3 and 3.6 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 12.4, 8.2 and 5.1 respectively. The result shows an outstanding correlation of TSH: y = 0.9985x - 0.0459 $R^2=0.9986$. For FT4, the CV% of the normal test for Control1 and Control2 are 0.70 and 0.71 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 8.7 and 16.2 respectively. The result shows an outstanding correlation of FT4: y = 1.2674x - 0.1133 $R^2=0.9824$. Conclusion The two-point calibration curve can be efficiently applied for TSH in cases where the number of test samples is not large, since the number of samples to be re-tested increases when the result is abnormal from the calibration curve. The two-point calibration curve test should not be applied for FT4 where the results do not consistently comply with the quality assessment range. Depending on how the two-point calibration curve is applied, up to 5 test tubes can be conserved per test, and the reduced time for reagent dispensing is anticipated to have a positive effect on the TAT (turnaround time).

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.95-99
• /
• 2004

The purpose of this study was to provide basic data for better design of Pharmacy after introducing the new system of separation of dispensing from prescribing medicine. To analyze characteristics of interior design in pharmacy and measure workers' satisfaction, a questionnaire survey was conducted with 255 workers who serve at any Pharmacies located in Busan, Korea. For data analysis, descriptive statistics, t-test, One-way ANOVA were performed with the SPSS Win program(Ver. 10.0). The satisfaction level of working environment was a little higher then an average. In terms of an area, an entrance was the highest, and dispensary was the lowest. Compared to the result of working time in the dispensary, it is necessary to study more about dispensary design for workers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.473-478
• /
• 2012

In this paper, the air bubble formation mechanism in the rectangular and triangular line-and-space pattern during dispensing UV Nanoimprint Lithography (UV-NIL) at an atmospheric condition is studied. To investigate the air bubble formation, an analytic model based on geometric approach and a numerical model based on CFD(computational fluid dynamics) were used in the analysis. It was found in the numerical analysis that every time the flow front passed through a corner of the pattern, it proceeded with a newly formed shape, occurring due to interface reconfiguration, since the flow fronts were formed such that they minimized the surface energy. Moreover, the conditions for the air bubble formation were investigated by applying the analytic analysis based on geometric approach and the numerical analysis. Good overall agreement was found between the analytic and numerical analysis.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.517-519
• /
• 1998

In this paper, Computer Colour Measuring Kitchen System (CCMKS) is developed on the basis of Delphi package and robust control concept. CCKMS is widely used in the colour dye making industry as a dispensing system which have more advantages than the conventional, when controlling the real processes and systems. This decreases the running time and increases the accuracy and confidence of real system.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2387-2389
• /
• 1998

In this paper, Computer Colour Kitchen System (CCKS) is developed on the basis of Delphi package and robust control concept. CCKS is widely used in the colour dye making industry as a dispensing system which have more advantages than the conventional, when controlling the real processes and systems. This decreases the running time and increases the accuracy and confidence of real system.

• Journal of ILASS-Korea
• /
• v.17 no.1
• /
• pp.20-26
• /
• 2012

Inkjet printing is one of the direct writing technologies and is able to form a pattern onto substrate by dispensing droplets in desired position. Also, by inkjet technology manufacturing time and production costs can be reduced, and procedures can be more efficient. To form a metal pattern, it must be harmonized with conductive nano ink, printing process, sintering, and surface treatment. In this study, micro patterning of conductive line has been investigated using the piezoelectric printhead driven by a bipolar voltage signal is used to dispense $20-40{\mu}m$ diameter droplets and silver nano ink which consists of 50 nm silver particles. In addition, hydrophobic treatment of surface, overlap printing techniques, and sintering conditions with changing temperature and times to achieve higher conductivity.