This study aimed at the analysis, from the perspective of rationality, of policy making process in the separation of prescribing and dispensing. This study is to identify the characteristics and problems of the policy process to introduce the new durg-prescription system, and make policy recommendations. In terms of separation of prescribing and dispensing, the development of policy making process can be divided into two periods; periods before and after the inauguration of the govemment of people. In the period before the govermment of poeple, one of the major characteristics of policy decision on the new system was the poweful influence of interset groups. At that time, the ministry lacked the problem-solving ability and commitment on the policy. Consequently, during the former period, the policy making process had been driven by interest groups. Therefore, the original purpose of the policy to secure the pulic health was lost. During the latter period, there was also the strong influence of interst groups, complexity of interest, the ministry's inability of problem solving. However, in this period, it is notable that this has drawn nation-wide attention, severl civic grouos have participated in the policy making process, and that the number and voice of these groups have remarkably increased. With regards to rationality, incrementalish model is highly sutable to explain the policy making process in the former period. But in the latter period when the new drugperscripition system became a national issue and civic groups began to participte in this matter more actively, rational model is more explanatory that incrementalism to understand the process. During the latter period, the original goal of this policy was not distored by a few interest groups thanks to the rapid development of civil movement and therebly a big influence of civic groups on the policy making. For that reson, a jigh level of rationality is found in the policy-making process of the latter period. Some suggestions to achieve the rationality in the policy making process based on the results of this study are as follows; Frist, the public's participation should be enered in the policy making process. Second, the govermment should make contiuns efforts to enhance its ability of long-term planning and policy implementation, and increase rationality of policy making process. Third, balance among interset groups should take place in the process of policy making. Forth, sound, constructive, and logical activity of interest groups is necessary to express and promote their interests.
Background: The recent change in pharmaceutical education system following the paradigm shift to patient-oriented pharmacy service requires an in-depth discussion to reorganize a future direction and establish a basis for maximizing social values of community pharmacy service. Objective: This study was conducted to review the current status of community pharmacy service provision in Korea based on published literatures. Methods: The electronic databases of National Digital Science Library and Electronic National Assembly Library were used to search the journal articles and dissertation papers. A search term "community pharmacy" was used and the published period was limited to papers published after year 2001, when the legal separation of prescribing and dispensing was implemented. Relevant study reports were also searched manually. Information about pharmacy service provision and study outcomes were retrieved from the selected papers, and classified by predefined individual service scope. Results: A total 33 papers reporting services provided by community pharmacies were selected (journal article 11, dissertation paper 17, and study report 5). Pharmacy services identified in these papers could be classified into prescription dispensing service, pharmaceutical care service, self medication service, other products service, and health promotion service. Twenty papers reported prescription dispensing services, three papers reported pharmaceutical care service, and only two papers reported health promotion service. Current community pharmacy services are highly dependent on prescription drugs while expanded services such as pharmaceutical care and health promotion are peripheral. Most prevalent research topic was medication counseling service (18 papers), reflecting that community pharmacists generally consider it to be the most important and fundamental service. Overall, current pharmacy services are very limited and focus on prescription dispensing service. Conclusion: At this point of time requiring expansion and quality improvement of community pharmacy services, we suggest further lively discussion to strengthen pharmacist's functional identity and set conditions for providing socially expected services.
The purpose of the study was to compare patient's satisfaction on the pharmacy services after introducing the new system of separation of dispensing from prescribing medicines, between those filling their prescriptions from the pharmacy nearby hospitals and those from the pharmacy in their resident areas. To measure patient's satisfaction, a questionnaire survey was conducted with 354 outpatients who received prescriptions from any of the three university hospitals located in In-Cheon city. Study results showed that geographic accessibility to pharmacy was a main attribute to select pharmacy. Size of the pharmacy and availability of prescription drugs are the second major reasons for pharmacy selection for the patients from the pharmacy nearby hospital, whereas patronage is the second major reason for those from the pharmacy in resident areas. Overall satisfaction was higher among the patients from the pharmacy in resident areas than those from the pharmacy nearby hospitals, mainly due to better facilities(waiting area, public telephone, etc), kindness, cleanliness, shorter waiting time, and pharmacist's concern about patient's health. On the other hand, the patients of the pharmacy nearby hospitals showed low satisfaction because of long waiting time and the lack of pharmacist's knowledge and information about patients' health status and medication history. Patients visiting the hospital that has pharmacy-hospital cooperation system showed higher satisfaction as compared to those visiting the hospital without such system. This study provided an empirical evidence that it would be more advantageous for patients to receive pharmacy services from pharmacies located in their living areas than from pharmacies nearby hospitals. This implies that there is a strong need for adequate strategies to enhance the role of pharmacies in resident areas under the new system of separation of dispensing from prescribing medications.
The effects of characteristics of community pharmacists on consultation time for prescription (RX) and nonprescription drugs (nRX) were investigated. A crosssectional descriptive design was established with a self-administered anonymous mail survey. Response rate was 52%. Significant pharmacists' factors related to having less than 3 minutes consultation for RX were one's dispensing duties exceeding 50%, low satisfaction with one's own level of consultation, working at the pharmacies nearby clinics, or shorter duration of consultation time for nRX. Consultation promoting conditions should be built up for the provision of sufficient consultation.
Park, Hye-Mi;Yoo, Seon-Hee;Lee, Seon-Ho;Kim, Nyun-Ok
The Korean Journal of Nuclear Medicine Technology
/
v.20
no.2
/
pp.75-79
/
2016
Purpose The ASAN Medical Center, Nuclear Medicine performs TSH (Thyroid stimulating hormone) and FT4 (Free Thyroxine) tests 8 times per day. Accordingly, 70 ~ 80 kit tubes are consumed every day for the measurements and the time consumed for reagent dispensing averages over 170 seconds, where the TAT (turnaround time) may be effected when the number of test samples is larger than expected. Therefore, the following test was conducted with the purpose to reduce the number of kit tubes consumed, and reduce the time for reagent dispensing. Materials and Methods The test is based on applying the same reagent for tests where the number of samples is 30 or less. The test for TSH was conducted 9 times from July $1^{st}$ 2015 to July $10^{th}$ 2015. The test for FT4 was conducted 4 times from June $18^{th}$ 2015 to June $22^{nd}$, 2015. Standard Solution No.2 (0.153 uU/mL) and No.5 (4.96 uU/mL) was selected as the two-point standards for the TSH test, and Standard Solution No.3 (0.777 ng/dL) and No.4 (2.044 ng/dL) was selected as the two-point standards for the FT4 test. 38 test samples were subject to correlation analysis. Results For TSH, the result of the normal test shows ranges of 0.20 ~ 0.37 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 6.77 ~ 7.94uU/mL for Control3, while the result of two-point calibration curve test shows ranges of 0.18 ~ 0.27 uU/mL for Control1, 0.53 ~ 0.71 uU/mL for Control2, and 7.30 ~ 8.52 uU/mL for Control3. For FT4, the result of the normal test shows ranges of 0.85 ~ 0.94 ng/dL for Control1 and 4.23 ~ 4.57 ng/dL for Control2, while the result of two-point calibration curve test shows ranges of 0.61 ~ 0.75 ng/dL for Control1 and 3.88 ~ 5.71 ng/dL for Control2. For TSH, the CV% of the normal test for Control1, Control2 and Control3 are 10.5, 3.3 and 3.6 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 12.4, 8.2 and 5.1 respectively. The result shows an outstanding correlation of TSH: y = 0.9985x - 0.0459 $R^2=0.9986$. For FT4, the CV% of the normal test for Control1 and Control2 are 0.70 and 0.71 respectively, while the CV% of the two-point calibration curve test for Control1 and Control1 are 8.7 and 16.2 respectively. The result shows an outstanding correlation of FT4: y = 1.2674x - 0.1133 $R^2=0.9824$. Conclusion The two-point calibration curve can be efficiently applied for TSH in cases where the number of test samples is not large, since the number of samples to be re-tested increases when the result is abnormal from the calibration curve. The two-point calibration curve test should not be applied for FT4 where the results do not consistently comply with the quality assessment range. Depending on how the two-point calibration curve is applied, up to 5 test tubes can be conserved per test, and the reduced time for reagent dispensing is anticipated to have a positive effect on the TAT (turnaround time).
Proceedings of the Korean Institute of Interior Design Conference
/
2004.05a
/
pp.95-99
/
2004
The purpose of this study was to provide basic data for better design of Pharmacy after introducing the new system of separation of dispensing from prescribing medicine. To analyze characteristics of interior design in pharmacy and measure workers' satisfaction, a questionnaire survey was conducted with 255 workers who serve at any Pharmacies located in Busan, Korea. For data analysis, descriptive statistics, t-test, One-way ANOVA were performed with the SPSS Win program(Ver. 10.0). The satisfaction level of working environment was a little higher then an average. In terms of an area, an entrance was the highest, and dispensary was the lowest. Compared to the result of working time in the dispensary, it is necessary to study more about dispensary design for workers.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.21
no.3
/
pp.473-478
/
2012
In this paper, the air bubble formation mechanism in the rectangular and triangular line-and-space pattern during dispensing UV Nanoimprint Lithography (UV-NIL) at an atmospheric condition is studied. To investigate the air bubble formation, an analytic model based on geometric approach and a numerical model based on CFD(computational fluid dynamics) were used in the analysis. It was found in the numerical analysis that every time the flow front passed through a corner of the pattern, it proceeded with a newly formed shape, occurring due to interface reconfiguration, since the flow fronts were formed such that they minimized the surface energy. Moreover, the conditions for the air bubble formation were investigated by applying the analytic analysis based on geometric approach and the numerical analysis. Good overall agreement was found between the analytic and numerical analysis.
Park, Jong-Gyu;Yun, Sung-Yong;Lee, Yong-Jae;Ahn, Tae-Chon
Proceedings of the KIEE Conference
/
1998.11b
/
pp.517-519
/
1998
In this paper, Computer Colour Measuring Kitchen System (CCMKS) is developed on the basis of Delphi package and robust control concept. CCKMS is widely used in the colour dye making industry as a dispensing system which have more advantages than the conventional, when controlling the real processes and systems. This decreases the running time and increases the accuracy and confidence of real system.
Park, Jong-Gyu;Yun, Sung-Yong;Lee, Yong-Jae;Ahn, Tae-Chon
Proceedings of the KIEE Conference
/
1998.07g
/
pp.2387-2389
/
1998
In this paper, Computer Colour Kitchen System (CCKS) is developed on the basis of Delphi package and robust control concept. CCKS is widely used in the colour dye making industry as a dispensing system which have more advantages than the conventional, when controlling the real processes and systems. This decreases the running time and increases the accuracy and confidence of real system.
Inkjet printing is one of the direct writing technologies and is able to form a pattern onto substrate by dispensing droplets in desired position. Also, by inkjet technology manufacturing time and production costs can be reduced, and procedures can be more efficient. To form a metal pattern, it must be harmonized with conductive nano ink, printing process, sintering, and surface treatment. In this study, micro patterning of conductive line has been investigated using the piezoelectric printhead driven by a bipolar voltage signal is used to dispense $20-40{\mu}m$ diameter droplets and silver nano ink which consists of 50 nm silver particles. In addition, hydrophobic treatment of surface, overlap printing techniques, and sintering conditions with changing temperature and times to achieve higher conductivity.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.