• 대한토목학회논문집
• /
• 제44권4호
• /
• pp.555-565
• /
• 2024

정부에서는 건설폐기물의 재활용을 높이기 위해서 분별해체를 강제하기 위해 법률규정을 제정하였다. 따라서 본 연구는 대규모 택지 조성을 위한 분별해체 공사의 공사비 산정을 위한 필수적인 요소로서 원단위를 제안하는 것을 목표로 한다. 이를 위해 4채의 단독주택을 선정하고 현장 조사와 실험을 하였다. 주택을 실측하여 도면을 작성하고 내장재를 정밀 조사하여 분별해체 작업의 공사비 산정을 위한 원단위를 제안하였다. 분별해체 작업은 천장, 벽, 바닥 등으로 부위별로 구분하여 진행하였고 부위별, 재료별로 작업 시간을 측정하였다. 특히 벽의 개구부를 구성하는 창문 등에 대한 보정 작업을 시행하여 기존 연구와의 차별성을 확보하고 정확성을 향상했다. 이러한 연구 결과는 실무에 즉시 적용할 수 있는 구체적인 지침으로 활용될 것으로 기대되며, 건설 분야의 지속 가능한 발전을 촉진할 것으로 기대된다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.681-686
• /
• 2003

연구로 해체 DB 구현과 관련하여 자료 입력의 편리성과 해체 정보 추출의 용이성을 제공하기 위해 User interface를 설계하였다. 연구로 시설을 대상으로 해체가 이뤄지는 특성을 고려하여 시설코드를 중심으로 해체 자료의 입력과 해체정보의 조회 및 출력이 수행되도록 하였으며, 또한 시설별로 최하위 해체 대상물의 추적이 가능하도록 Explorer 기능을 부여하였다. 해체 자료 입력 화면과 조회 및 출력 화면 설계에 이어 해체 전 원형의 모습부터 변형된 원형의 모습까지 해체 전 과정을 동영상과 그림으로 보여주기 위해 Multimedia 자료구조를 추가하였다. 향후에는 해체 DB와 User Interface에 공학적인 개념을 도입하여 해체 정보를 분석하고 평가할 수 있는 기능을 부여 할 예정이다.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.95-102
• /
• 2008

Since the processes of dismantling are very dangerous, there have been many studies to develop remote operating devices using joystick. In this paper, in order to improve the operability of the dismantling equipment that is usually an excavator, a novel concept of tole-operated device is proposed. Operators who use this device with additional environmental sensing devices can work safely away from the dangerous sites. First, based on the concept design of the remote controller, its workspace is analyzed and the workspace mapping from the device to the excavator is explored. Second, after 7 steps of the excavating processes are defined, the kinematics which deals with the conversion from the 3 dimensional position information of the device to the joint variable information of the backhoe is included in this paper. Lastly, 3D graphical simulation of both remote controller and the backhoe will be shown. This new design of the remote control device tan be easily manufactured and gives the workers very convenient and transparent remote control capability.

• 패션비즈니스
• /
• 제28권3호
• /
• pp.1-15
• /
• 2024

Christopher Nemeth is a designer who combines characteristics of a pioneering upcycle design and deconstructionist design with fabrics, waste clothing, and pieces of fabric recycled in the 1980s. By hommaging his work from the Louis Vuitton 2015 F/W collection, Kim Jones is once again becoming a source of design inspiration in an era where upcycling fashion is attracting attention. Accordingly, an upcycling design approach might appeal to the MZ generation. Christopher Nemes' design presented in this study as a representative fashion designer of dismantling upcycling is basically based on dismantling. It can also be interpreted as dismantling upcycling design because it uses used clothing, waste clothing, and discarded fabrics as materials. This study examined main techniques of upcycling fashion design and derived characteristics of Nemes design as "deconstructive techniques using free lines of construction," "recycling upcycling vintage materials and clothing accessories," and "using handcrafted techniques of artistic sensibility." By applying Nemes' dismantling upcycling technique, four designs were developed for men's top and bottom sets for targets in their 20s and 30s to suggest the commercialization possibility. This study is meaningful in that it proposes a methodical alternative to the new deconstructionist upcycling design that can show Nemes' aesthetic characteristics, creative perspective, and personality by modernly reinterpreting the deconstructionist upcycling technique extracted through analysis of fashion designer Christopher Nemes' design. In particular, by actually producing the work and confirming whether the design technique can be implemented, the value as a fashion product that can be sold is realized.

• 청정기술
• /
• 제23권3호
• /
• pp.248-255
• /
• 2017

In dismantling factories for recycling, it is important to input actual working data to a personal computer (PC) in order to monitor the work results and related recycling rate of the inputs. This should be performed with a keyboard, a mouse, or other devices. But when a worker is working in the factory, it could be bothersome or time consuming to go to the PC. Especially, workers who works at dismantling factories have a generally low education level are scared to use a PC, which could be used as a pretext for not using the PC. In some cases, data input is performed by a worker after the day's job. In this case, it could take additional time, the worker can make more mistakes, and the data could be unreliable. In this study, we developed a man-machine interface (MMI) device using a safety helmet. A joystick-like device, pushbuttons, and a radio frequency (RF) device for wireless communication is equipped in a safety helmet. This MMI device has functions similar to a PC mouse, and it has a long communication distance. RF is used because it consumes less battery power than Bluetooth. With this MMI device, workers need not go to a PC to input data or to control the PC, and they can control the PC from a long distance. The efficiency of PCs in a factory could be increased by using the developed MMI system, and workers at the dismantling factories could have less reluctance in using the PC.

• 화약ㆍ발파
• /
• 제39권4호
• /
• pp.1-11
• /
• 2021

본 연구에서는 기계식 해체공법을 적용한 슬래브 해체 시 발생하는 진동을 분석하기 위해 진동 자료를 획득하였다. 획득한 진동 자료는 부착장치에 따라 구별하여 파형 및 우세주파수 분석을 수행하였고, 작업위치와 계측위치 사이의 거리를 측정하는 방법을 달리하여 상관관계를 분석하였다. 부착 장치 별 파형분석 결과 장비 작업에 의한 진동 파형의 위상 변화는 거의 없고 진동속도의 크기인 진폭의 변화만 일어났으며, 주파수 분석 결과 압쇄기를 사용한 경우 브레이커를 사용한 경우에 비해 주파수 대역이 낮으며, 해체 대상 건축물의 고유 진동수와 주파수 대역이 근접하였다. 상관관계 분석결과 작업 위치와 계측위치의 이격거리는 상호 간의 직선거리가 아닌 실제 건축물을 따라 진동이 전파하는 경로로 평가해야 높은 상관성을 보임을 확인하였다.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.135-141
• /
• 2012

This study was conducted to evaluate the characteristics of exposure to asbestos for ship repair workers in Korea by a systematic review. The number of articles studying asbestos exposure levels from ship repair workplaces was found to be 4. All asbestos concentration reported as either geometric mean and geometric standard deviation or ranges were transformed to arithmetic mean to estimate exposure level. In addition, weighted arithmetic means(WAMs) were calculated by weighing of the different number of samples. The WAM concentrations were 2.746 f/cc during asbestos dismantling work, 0.034 f/cc before asbestos dismantling work and 0.065 f/cc after working respectively. The maximum airborne concentration of asbestos during asbestos removal work was 7.02 f/cc which was 70 times higher than the occupational exposure limit of Korea, 0.1 f/cc. This study recommends that retrospective exposure to asbestos based on various ship types and operations should be assessed.

• 토지주택연구
• /
• 제2권2호
• /
• pp.195-204
• /
• 2011

철근콘크리트 건축물에 중장비를 탑재하여 해체작업을 시행할 때, 중장비와 철거잔재의 중량은 건축물을 설계할 당시에 고려하지 못한 하중으로 작용한다. 그러나 우리나라 해체 현장에서는 건축물의 안전성에 대한 구조전문가의 검토 없이, 현장 관리자나 작업자의 경험에 의하여 중장비 탑재와 해체작업이 이루어지고 있어 작업 중에 건축물이 붕괴하거나 중장비가 추락하는 사례도 발생하고 있다. 따라서 해체공사 시행 과정에서 해체 대상 건축물의 구조안전성을 평가할 수 있는 평가기법과 구조부재가 부담할 수 있는 적정 장비중량에 대한 기준 마련이 시급한 실정이다. 이 논문에서는 기계해체 현장에 대한 방문조사와 작업근로자에 대한 설문조사를 통해 해체 대상 건축물의 안전성 평가에 필요한 철거잔재 하중, 하중계수, 강도감소계수, 작업하중 등을 제안하였다. 해체 현황을 고려한 구조물의 해석과 부재(슬래브, 보)의 적절한 안전성 평가방법을 제시하였으며, RC 슬래브와 RC 보의 제원에 따라 양중 가능한 중장비의 중량을 제시하였다. 이 연구에서 제안한 해체구조물의 안전성 평가기법과 중장비 탑재 등급은 해체대상 구조부재의 성능을 합리적으로 평가하고, 적정한 장비운영을 통한 해체작업의 효율성과 안전성을 향상하는 데 유용하게 활용될 수 있을 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3293-3298
• /
• 2022

Removing radioactive contaminated metal materials is a vital task during the decommissioning of nuclear power plants to reduce the cost of the post-dismantling process. The laser decontamination technique has been recognized as a key tool for a successful dismantling process as it enables a remote operation in radioactive facilities. It also minimizes exposure of workers to hazardous materials and reduces secondary waste, increasing the environmental friendless of the post-dismantling processing. In this work, we present a thorough and efficient laser decontamination approach using a single-mode continuous-wave (CW) laser. We subjected stainless steels to a surface-removal process that repetitively exposes the laser to a confined region of ~75 ㎛ at a high scanning rate of 10 m/s. We evaluate the decontamination performance by measuring the removal depth with a 3D scanning microscope and further investigate optimal removal conditions given practical parameters such as the laser power and scan properties. We successfully removed the metal surface to a depth of more than 40 ㎛ with laser power of 300 W and ten scans, showing the potential to achieve an extremely high DF more than 1000 by simply increasing the number of scans and the laser power for the decontamination of primary circuits.

• 대한가정학회지
• /
• 제44권4호
• /
• pp.1-9
• /
• 2006

This study examines the esthetic characteristics in the haute couture work of Jean Paul Gaultier, who represents the fashion in France and is famous for avant-garde and experimental works through dismantling, from the first haute couture collection in 1997 to the present. The materials for the study are the precedent studies, the related literature, and the photographs of the works and the interview articles in domestic and international fashion journals. Three characteristics are revealed in his works. First of all, he provided a transcendental fashion different from the established wearing or ornamental ways by dismantling the dichotomies between male and female, time and space, and beauty and ugliness. Second, he reflected the decadent beauty recognized as representing women's sexual and provocative expression based on exposure, suppression, perversion, and grotesque manifestations by shaping an esthetic value within a different point of view. Finally, he was characterized as being transcendental with an eclectic fusion of intercultural differences or dynamics, items in costume formation, time and space, and eastern and western. This transcendental expression, Gaultier's desire for creativeness, can be an ideal characterizing this era.