• 한국기계가공학회지
• /
• 제6권4호
• /
• pp.15-21
• /
• 2007

The effect of manufacturing parameters on friction characteristics of motorcycle break system was studied using a disk-on-pad type friction tester. Such parameters conditions have an effect on the frictional factor such as number of ventilated disk hole, applied load, sliding speed, and sliding distance. However, it is difficult to know the mutual relation of these factors. In this study, the friction characteristics using design of experiment containing 4 elements were investigated for an optimal condition for the best motorcycle break system employing regression analysis method. From this study, the result was shown that the applied load in frictional factors was the most important, next to sliding speed, number of ventilated disk hole.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.772-777
• /
• 2000

Cam mechanisms are used commonly in many automatic machinery. Disk cam mechanisms has 4 different types according to the different types of followers. The motion characteristics of the cam mechanisms depend on the shape of the cam and the type of the follower. This paper performs the motion analysis for a disk cam and follower mechanism using a circular arc method and a coordinate transformation method in order to find a contact point of the cam and follower. The velocity is calculated by using the instant velocity concept. Also, the acceleration is determined on using the central difference method. As the results, this paper presents the original curve and the analyzed curve for the motion analysis of the disk cam for an example.

• Tribology and Lubricants
• /
• 제17권6호
• /
• pp.459-466
• /
• 2001

In this study, the effects of oxide layer formed on the contact parts of TiN coated ball and steel disk on friction characteristics in various sliding conditions were investigated. AISI52100 steel ball was used for the substrate of coated ball specimens, which were prepared by depositing TiN coating with 1(m in coating thickness. AISI1045 steel was used for the disk type counter-body. To investigate the effect of oxide layer on the contact parts of two materials, the tests were performed both in air for forming oxide layer on the contact parts and in nitrogen environment to avoid oxidation. From the test results, the frictional characteristic between the two materials was predominated by iron oxide layer that formed on wear tract of counter-body and this layer caused friction transition and high friction. And the adhesive wear occurred from steel disk to TiN coated ball caused the formation of oxide layer on counter parts between the two materials.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.742-747
• /
• 2000

The optical storage device has recently experienced significant improvements, especially for the aspects of high capacity and fast transfer rate. However, it is the fact that the optical storage device has the lower access time for the randomly scattered data compared to the hard disk drives. It is, therefore, necessary to develop a new type of optical storage system. In this study, we investigate the air bearing characteristics for the optical disk drives which have the swing arm actuator similarly to the hard disk drives. Considering the requirements of the optical disk drives, we parametrize the shape of the air bearing surface and investigate its sensitivity to the flying characteristics for further optimized design outputs.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.55-66
• /
• 2019

Storage system often applies erasure codes to protect against disk failure and ensure system reliability and availability. Liberation code that is a type of coding scheme has been widely used in many storage systems because its encoding and modifying operations are efficient. However, it cannot effectively achieve fast recovery from single disk failure in storage systems, and has great influence on recovery performance as well as response time of client requests. To solve this problem, in this paper, we present HRSF, a Hybrid Recovery method for solving Single disk Failure. We present the optimal algorithm to accelerate failure recovery process. Theoretical analysis proves that our scheme consumes approximately 25% less amount of data read than the conventional method. In the evaluation, we perform extensive experiments by setting different number of disks and chunk sizes. The results show that HRSF outperforms conventional method in terms of the amount of data read and failure recovery time.

• 한국강구조학회 논문집
• /
• 제18권4호
• /
• pp.437-446
• /
• 2006

철도판형교는 한국철도 교량에서 약 40%를 차지하고 있는 중요교량 형식중의 하나이다. 그러나 판형교의 대표적인 교량받침은선받침으로 거동 및 유지관리에 상당한 문제들을 발생시키고 있다. 이러한 문제를 해결하기 위한 방안연구의 일환으로 본 연구에서는 판형교의 실교량을 선정하여 선받침을 폴리우레탄 디스크 받침으로 교체하였다. 폴리우레탄 디스크 받침은 탄성받침의 일종으로 폴리우레탄 패드를 사용하여 탄성을 구현한다. 철도 판형교에 이와 같이 탄성받침을 설치하는 경우 실교량의 동특성의 변화 및 동적 거동의 변화를 디젤기관차 재하실험 및 운행차량에 의한 거동 계측을 통해서 분석 평가하였다. 탄성받침에 의해서 판형교의 1차모드 고유진동수가 3% 감소하였으며, 2차 및 3차모드의 고유진동수는 7 및 15% 감소하였다. 디스크 받침에 의해서 판형교의 동적 수직 처짐은 증가하였으나, 디스크의 변형을 제거한 교량의 순수 변형에 의한 처짐은 거의 증가하지 않는다. 교축직각방향의 변위는 디스크 받침의 전단핀 역할에 의해서 감소하는 경향을 보였다. 또한, 수평방향의 가속도도 탄성 받침에 의해서 거의 변화가 없었다.

• Tribology and Lubricants
• /
• 제16권6호
• /
• pp.409-414
• /
• 2000

The friction and wear behaviors of MoS$_2$ coatings were investigated by using a pin and disk type tester. The experiment was conducted by using silicon nitride as pin material and MoS$_2$-on-bearing steel as disk material under different operating conditions that include linear sliding velocities in the range of 22-66 ㎜/sec, normal loads varying from 9.8 N to 29.4 N, corresponding to maximum contact pressures of 1.18-2.83 GPa and atmospheric conditions of high vacuum, medium vacuum, ambient air. The results showed that low friction coefficient of the coating has been identified in high vacuum and that friction coefficient and wear volume increased with increasing normal load. Also at high load conditions, the friction coefficient and wear volume increased with increasing sliding velocity.

• Journal of Mechanical Science and Technology
• /
• 제14권3호
• /
• pp.358-368
• /
• 2000

The hydrodynamic stability of the Karman boundary-layer flow due to a rotating disk has been numerically investigated for moving disturbance waves. The disturbed flow over a rotating disk can lead to transition at much lower Re than that of the well-known Type I instability mode. This early transition is due to the excitation of the Type II instability mode of moving disturbances. Presented are the neutral stability results concerning the two instability modes by solving new linear stability equations reformulated not only by considering whole convective terms but by correcting some errors in the previous stability equations. The reformulated stability equations are slightly different with the previous ones. However, the present neutral stability results are considerably different with the previously known ones. It is found that the flow is always stable for a disturbance whose dimensionless wave number k is greater than 0.75.

• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.660-666
• /
• 2005

Recently, the need for subminiature storage systems has increased with the diversification of portable devices. An actuator for small optical disk drives has to satisfy performance requirements such as higher access speed, lower power consumption, and smaller size. In this paper, we proposed the miniaturized rotary type VCM actuator that had an effective focusing mechanism and secured sufficient bandwidth for small form factor (SFF) optical disk drive (ODD). Initial model was designed by electromagnetic (EM) and structural analyses. Such a model was improved using design of experiments (DOE) procedure based on a Blu-ray disk (BD) 1x specifications.

• KSTLE International Journal
• /
• 제1권2호
• /
• pp.91-94
• /
• 2000

The friction and wear behavior of MoS$_2$coatings was investigated using a pin and disk type tester. The experiment was conducted with silicon nitride as the pin material and MoS$_2$-on-bearing steel as the disk material under different operating conditions that included linear sliding velocities within a range of 2266 mm/sec, normal loads varying from 9.829.4 N, corresponding to maximum contact pressures of 1.782.83 Gpa, and high vacuum, medium vacuum, and ambient air atmospheric conditions. The results showed a low friction coefficient far the coating in a high vacuum, plus the friction coefficient and wear volume increased with an increased normal load. Furthermore, under high load conditions, the friction coefficient and wear volume also increased with an increased sliding velocity.