• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.110-114
• /
• 2012

We studied on the nondestructive evaluation of the elastic wave signal of SiC ceramics and SiC/SiC composite ceramics under monotonic tensile loading. The elastic wave signal of cross and unidirectional SiC/SiC composite ceramics were obtained by pencil lead method and bending test. It was applied for the time-frequency method which used by the discrete wavelet analysis algorithm. The time-frequency analysis provides time variation of each frequency component involved in a waveform, which makes it possible to evaluate the contribution of SiC fiber frequency. The results were compared with the characteristic of frequency group from SiC slurry and fiber. Based on the results, if it is possible to shift up and design as a higher frequency group, we will can make the superior material better than those of exiting SiC/SiC composites.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.263-272
• /
• 2014

Scattering source calculations using conventional spherical harmonic expansion may require lots of computation time to treat full-coupled three-dimensional photon-electron transport in a highly anisotropic scattering medium where their scattering cross sections should be expanded with very high order (e.g., $P_7$ or higher) Legendre expansions. In this paper, we introduce a modified scattering kernel approach to avoid the unnecessarily repeated calculations involved with the scattering source calculation, and used it with parallel computing to effectively reduce the computation time. Its computational efficiency was tested for three-dimensional full-coupled photon-electron transport problems using our computer program which solves the multi-group discrete ordinates transport equation by using the discontinuous finite element method with unstructured tetrahedral meshes for complicated geometrical problems. The numerical tests show that we can improve speed up to 17~42 times for the elapsed time per iteration using the modified scattering kernel, not only in the single CPU calculation but also in the parallel computing with several CPUs.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1515-1517
• /
• 2002

$MnO_2$ is used for the oxide electrode of electrochemical equipments because of its good electric conductivity and low oxygen overpotential. The effect of additives on the properties of $MnO_2$ has been investigated to enhance the electric conductivity and the stability in an acid solution. In this research, the effect of Ni addition on ${\beta}-MnO_2$ was studied by the theoretical quantum chemical method. The calculation was carried out by the discrete variation $X{\alpha}$ method, which is a sort of the first principle method and use Hatre-Fock-Slater approximation. The electron energy level, the density of state, the bond overlap population, the charge density distribution and the net ionic transfer between cations and anions were calculated and discussed. The used cluster model was $(Mn_{10}NiO_{44})^{-44}$.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.10 no.3
• /
• pp.69-76
• /
• 2000

In this paper we propose a new group key renewal scheme suitable for secure mobile communications in which all members of the group can re-share the new group common key excepted a revoked member using a key distribution center(a trusted center). A renewal group key in the proposed scheme can be shared many times using pre-distributed data by a smart card without a preparation stage. This scheme is also avaliable for a large group network because the transmitted data amount after identifying the revoked member does not depend on a size of group. The secuirty of this scheme is based on the difficulty of the discrete logarithm problem.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.2
• /
• pp.62-72
• /
• 2023

Objective: Although balance training has been used as an effective ankle injury rehabilitation program to restore neuromuscular deficits in patients with chronic ankle instability, it is not effectively used in terms of motor learning. Attentional focusing can be an effective method for improving ankle kinematics to prevent recurrent ankle injuries. This study aimed to 1) evaluate the effects of attentional focus, including internal and external focus, and 2) determine a more effective focusing method for patients with chronic ankle instability to learn balance tasks. Method: Twenty-four patients with chronic ankle instability were randomly assigned to three groups (external focus, internal focus, and no feedback) and underwent four weeks of progressive balance training. The three-dimensional ankle kinematics of each patient were measured before and after training as the main outcomes. Ensemble curve analysis, discrete point analysis, and post hoc pairwise comparisons were performed to identify interactions between groups and time. Results: The results showed that (1) the external focus group was more dorsiflexed and everted than the internal focus group; (2) the external focus group was more dorsiflexed than the no feedback group; and (3) the no feedback group was more dorsiflexed than the internal focus group. Conclusion: Because dorsiflexion and eversion are ankle motions that oppose the mechanism of lateral ankle sprain, using the external focus method during balance training may be more effective in modifying these motions, thereby reducing the risk of ankle sprain.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.3
• /
• pp.201-209
• /
• 1984

In order to examine the effect of initial spray condition on the spray combustion mode and flame characteristics, theoretical analysis was carried out to predict combustion mode and flame structure for various initial distribution of droplets in spray. A system of conservation equations of spray flame in two dimensional axisymmetric for two phase flow was solved by a discrete element method for n-Butylbenzen (C$_{10}$ $H_{14}$). As a results of present study, there are two principal group combustion modes that may occur independently for various initial group combustion numbers in a spray burner. These group combustion modes are termed as an external and internal group combustion mode. The critical group combustion number between the internal and external group combustion mode and the flame characteristics of those flame are also predicted. These results may be used as a basic data in the designing of new combustors as well as proper operating conditions for spray burners.s.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.86-92
• /
• 2018

The amount of construction waste generated is steadily increasing every year, and the Law for Promotion of Recycling is enacted. However, it is difficult to use it as a recycled aggregate for concrete, which is presented in the quality standard of recycled aggregate with high water uptake and low density due to low separation of aggregate between concrete and cement paste. Therefore, in this study, a multi-stage impact crusher was used to remove mortar, which is essential for improving the quality of recycled aggregate. In analyzing the characteristics of the equipment, the spectrum of energy generated in each part between the particle and the equipment was calculated by using DEM. In order to generate an effective separation phenomenon, it was confirmed that the operation condition of 900 RPM was appropriate based on the ratio of the number of collisions (L/H) of the low energy group (L) to the number of collisions of the high energy group (H).

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.331-336
• /
• 2002

In this paper, we propose a new distribution and renewal scheme for a group key suitable for secure mobile communications based on identification protocol, in which all members of the group can reshare the new group common key except revoked members by using a key distribution center (a trusted center). The security of this scheme is based on the difficulty of the discrete logarithm problem. The proposed scheme can be appropriately managed in case that terminal's capability of storage and computing power is relatively small and more than one caller are revoked. It also renews a group key easily when the center changes this key intervally for security.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.101-112
• /
• 1999

In this paper, the codebook design method of VQ (vector quantization) is proposed an method to extract feature data of image for multimedia information searching. Conventional VQ codebook design methods are unsuitable to extract the feature data of images because they have too much computation time, memory for vector decoding and blocking effects like DCT (discrete cosine transform). The proposed design method is consists of the feature extraction by WT (wavelet transform) and the data group divide method by PCA (principal component analysis). WT is introduced to remove the blocking effect of an image with high compressing ratio. Computer simulations show that the proposed method has the better performance in processing speed than the VQ design method using SOM (self-organizing map).

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.115-122
• /
• 2023

This study utilized a discrete element method (DEM) simulation, as one of the virtual field trials, to predict the impact of tillage depth on the rotary blade shaft during rotavator tilling. The virtual field for the simulation was generated according to soil properties observed in an actual field. Following the generation of particles for the virtual field, a sequence of calibration steps followed to align the mechanical properties more closely with those of real soil. Calibration was conducted with a focus on bulk density and shear torque, resulting in calibration errors of just 0.02% for bulk density and 0.52% for shear torque. The prediction of the load on a rotary tiller's blade shaft involved a three-pronged approach, considering shaft torque, draft force, and vertical force. In terms of shaft torque, the values exhibited significant increases of 42.34% and 36.91% for every 5-centimeter increment in tillage depth. Similarly, the vertical force saw substantial growth by 40.41% and 36.08% for every 5-centimeter increment. In contrast, the variation in draft force based on tillage depth was comparatively lower at 18.49% and 0.96%, indicating that the effect of tillage depth on draft force was less pronounced than its impact on shaft torque and vertical force. From a perspective of agricultural machinery research, this study provides valuable insights into the DEM soil modeling process, accounting for changes in soil properties with varying tillage depths. These findings are expected to be instrumental in future agricultural machinery design studies.