• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.145-149
• /
• 1997

This paper describes a methodology for the development of models of discrete event system. The methodology is based on transformation of continuous state space into discrete one to homomorphically represent dynamics of continuous processes in discrete events. This paper proposes a formal structure which can coupled discrete event system models within a framework. The structure employs the discrete event specification formalism for the discrete event system models. The proposed formal structure has been applied to develop a discrete event specification model for the complex spectral density analysis of strip for urin analyzer system. For this, spectral density data of strip is partitioned into a set of Phases based on events identified through urine spectrophotometry. For each phase, a continuous system of the continuous model for the urine spectral density analysis has been simulated by programmed C++. To validate this model, first develop the discrets event specification model, then simulate the model in the DEVSIM++ environment. It has the similar simulation results for the data obtained from the continuous system simulation. The comparison shows that the discrete event specification model represents dynamics of the urine spectral density at each phase.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.680-684
• /
• 2005

This paper presents a data-based stability analysis of a MIMO linear time-invariant discrete-time system, as an extension of the previous results for a SISO system. In the MIMO case, a similar discussion as in the case of a SISO system is also applied, except that an augmented input and output space is considered whose dimension is determined in relation to both the orders of the input and output vectors and the numbers of inputs and outputs. As certain subspaces of the input and output space, both output data space and closed-loop data space are defined, which contain all the behaviors of a system, respectively, with zero input in open-loop and with a control input in closed-loop. Then, we can derive the data-based stability conditions, in which the open-loop stability can be checked by using a data matrix whose column vectors span the output data space and the closed-loop stability can also be checked by using a data matrix whose column vectors span the closed-loop data space.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.331-336
• /
• 2005

A lot of manufacturing knowledge and method have applied to increase manufacturing efficiency in industry field. DES(Discrete Event Simulation) is one of solution to deal with manufacturing problems in factory. Beginning of research, old maintenance system of KNR ( Korea National Railroad) and its technical problems are basically investigated. KNR has maintained railway vehicle with their own solution based on experience. Very advanced railway vehicles such as KTX (Korea Train Express) and TTX(Tilting Train Express) will be difficult to maintain with their old maintenance method. In order to apply knowledge of DES, maintenance field of railway must be considered. Imaginary maintenance machine are selected to variable of DES. Maintenance capability of each machine will be evaluated base on imaginary data from imaginary machine. The machine could be very expensive as well as difficult to replace. Target of research is minimization of number of machine in railway workshop. So basic knowledge of discrete event simulation is introduced. Then five essential stages of discrete event simulation are provided. Each maintenance case defined as event. Each event is discrete and simulated base on different case such as one maintenance line with one machine and one maintenance line with two machines in railway workshop. simple maintenance method, discrete event simulation, will be come out very powerful in complicate maintenance system and will be helpful to reduce maintenance cost as well as maintenance labor.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.274-280
• /
• 2005

The objective of this study Is to investigate the heat transfer performance of plate discrete fin-and-tube heat exchangers with large fin pitch. In this study, twenty-two heat exchangers were tested with a variation of fin pitch, number of tube row, longitudinal tube pitch and fin alignment. Discrete fin type exchangers improved heat transfer performance more than 10% compared to tile continuous fin type heat exchangers. The air-side heat transfer coefficient decreased with a reduction of the fin pitch and an increase of the number of tube row, The staggered fin alignment improved heat transfer performance more than 6% compared to the inline fin alignment. The effect of longitudinal tube pitch was insignificant on the j-factor and experiments found opposite effects on the j-factor with respect to fin alignment. Heat transfer correlations were developed from the measured data for flat plate discrete fin-and-tube heat exchangers with large fin pitch. The correlations yielded good predictions of the measured data with mean deviations of 1,4% and 0.3% for tire inline and staggered tube alignment, respectively.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.639-652
• /
• 2012

A three-dimensional discrete fracture network model was developed in order to simulate the hydraulic characteristics of a granitic rock mass at Korea Atomic Energy Research Institute (KAERI) Underground Research Tunnel (KURT). The model used a three-dimensional discrete fracture network (DFN), assuming a correlation between the length and aperture of the fractures, and a trapezoid flow path in the fractures. These assumptions that previous studies have not considered could make the developed model more practical and reasonable. The geologic and hydraulic data of the fractures were obtained in the rock mass at the KURT. Then, these data were applied to the developed fracture discrete network model. The model was applied in estimating the representative elementary volume (REV), the equivalent hydraulic conductivity tensors, and the amount of groundwater inflow into the tunnel. The developed discrete fracture network model can determine the REV size for the rock mass with respect to the hydraulic behavior and estimate the groundwater flow into the tunnel at the KURT. Therefore, the assumptions that the fracture length is correlated to the fracture aperture and the flow in a fracture occurs in a trapezoid shape appear to be effective in the DFN analysis used to estimate the hydraulic behavior of the fractured rock mass.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.63-69
• /
• 1999

The research trend of the simulation optimization has been focused on exploring continuous decision variables. Yet, the research in discrete decision variable area has not been fully studied. A new research trend for optimizing discrete decision variables ha just appeared recently. This study, therefore, deals with a discrete simulation method to get the system evaluation criteria required for designing a complex probabilistic discrete event system and to search the effective and reliable alternatives to satisfy the objective values of the given system through a on-line, single run with the short time period. Finding the alternative, we construct an algorithm which changes values of decision variables and a design alternative by using the stopping algorithm which ends the simulation in a steady state of system. To avoid the loss of data while analyzing the acquired design alternative in the steady state, we provide background for estimation of an auto-regressive model and mean and confidence interval for evaluating correctly the objective function obtained by small amount of output data through simulation with the short time period. In numerical experiment we applied the proposed algorithm to (s, S) inventory system problem with varying Δt value. In case of the (s, S) inventory system, we obtained good design alternative when Δt value is larger than 100.

• Journal of the korean society of oceanography
• /
• 제38권4호
• /
• pp.166-172
• /
• 2003

Multi­Sensor Core Logger (MSCL) is a useful system for logging the physical properties (compressional wave velocity, wet bulk density, fractional porosity, magnetic susceptibility and/or natural gamma radiation) of marine sediments through scanning of whole cores in a nondestructive fashion. But MSCL has a number of problems that can lead to spurious results depending on the various factors such as core slumping, gas expansion, mechanical stretching, and the thickness variation of core liner and sediment. For the verification of MSCL data, compressional wave velocity, wet bulk density, and porosity were measured on discrete samples by Hamilton Frame and Gravimetric method, respectively. Acoustic impedance was also calculated. Physical property data (velocity, wet bulk density, and impedance) logged by MSCL were slightly larger than those of discrete sample, and porosity is reverse. Average difference between MSCL and discrete sample at both sites is relatively small such as 22­24 m/s in velocity, $0.02­-0.08\;g/\textrm{cm}^3$ in wet bulk density, and 2.5­2.7% in porosity. The values also show systematic variation with sediment depth. A variety of factors are probably responsible for the differences including instrument error, various measurement method, sediment disturbance, and accuracy of calibration. Therefore, MSCL can be effectively used to collect physical property data with high resolution and quality, if the calibration is accurately completed.

• Journal of information and communication convergence engineering
• /
• 제5권2호
• /
• pp.88-92
• /
• 2007

In this paper, an SS-RRA protocol that is based on Code Division Multiple Access is proposed and analyzed under the integrated voice and data traffic load. The backward logical channels consist of slotted time division frames with multiple spreading codes per slot. The protocol uses a reservation mechanism for the voice traffic, and a random access scheme for the data traffic. A discrete-time, discrete-state Markov chain is used to evaluate the performance. The numerical results show that the performance can be significantly improved by a few distinct spreading codes.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.17-24
• /
• 1988

This paper describes a neural network modelling of a vertebrate retina using a discrete-time and discrete-space approach based on neuro-anatomical data, and the computer simulations of the model which approximate the frog/amphibian negro-physiological data. It then compares them and describes how such a model can be beneficially used for confirming the hypothesis of a given neural system and further predict yet unknown experimental data.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.225-230
• /
• 1997

Discrete Wavelet Transforms (DWTs) are recent mathematics, and begin to be used in various fields. The wavelet transform can be used to compress the signal and image due to its inherent properties. We applied the wavelet transform compression and reconstruction to the neutron cross section data. Numerical tests illustrate that tile signal compression using wavelet is very effective to reduce the data saving spaces.