• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.121-124
• /
• 2004

This paper proposed the method of creating image mosaic in automated fashion. It is well known that geometric and radiometric balance in adjacent images should be maintained in mosaicking process. The seam line to minimize geometric discontinuity was extracted using Minimum Absolute­Gray-Difference Sum considering constraint condition in search width. To maintain the radiometric balance of images acquired at different time, we utilized Match Cumulative Frequency, Match Mean and Standard Deviation and Hue Adjustment algorithm. The mosaicked image prepared by the proposed method was compared with those of commercial software. Experiments show that seam lines were extracted significantly well from roads, rivers. ridgelines etc. and Match Cumulative Frequency algorithm was performed pretty good in histogram matching

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.13-18
• /
• 1998

In this paper, a new type microstrip directional coupler has been designed and a 3dB coupler has been fabricated and measured. The measured and analysed results are agree well each other except difference of 1 dB insertion loss. There are two eigenmodes, e.g. even and odd mode in coupled microstrip lines. By using the difference between these two eigenmodes phase constants, the directional coupler can be designed by adjusting coupling length, which has a desired coupler has a disdvantage that its coupling length is longer than conventional oe, but it may be used as a useful coupler in millimeter wave range. And it has the merit of less discontinuity effects, becuase it is simpler than the other couplers in structure.

• Mass Spectrometry Letters
• /
• 제4권4호
• /
• pp.83-86
• /
• 2013

A new interface for coupling CIEF and MS using a four-way cross has been developed in a single mechanical system. This new interface could be operated without the electric discontinuity and reinstallation of lines. Additionally, a bare fused silica capillary was facilitated as a spray needle to produce electrospray and to guide catholyte or sheath liquid. Focusing for CIEF was completed in a hanging droplet at the end of spray needle. This capillary spray needle also provided stable spray, enhanced the ionization efficiency and increased sensitivity. Results with carbonic anhydrase I showed that focusing and spraying were well completed with the new interface and the new spray needle.

• 자원환경지질
• /
• 제25권2호
• /
• pp.167-177
• /
• 1992

The gravity measurement has been conducted at 53 and 34 stations with an interval of 1~1.5 km along the national roads of about 47 km and 34 km running from Duksungri to Yangpori and from Angangri to Byungpori, Kyungsangbookdo, respectively. The subsurface geology and geologic structure of Tertiary Pohang and Janggi basins along two survey lines are interpreted quantitatively by applying Fourier series and Talwani methods for Bouguer gravity anomaly. The depths of Conrad discontinuity vary from 11.8 to 12.5 km and 11.5 to 13.2 km along the survey lines between Duksungri and Yangpori, and Angangri and Byungpori, respectively. The depths of pre-Cambrian Gneiss complex underneath Kyungsang Supergroup vary from 3.8 to 4.2 km and 3.8 to 4.6 km along the survey lines between Duksungri and Yangpori, and Angangri and Byungpori, respectively. Massive granite bodies which are not exposed along the survey line between Duksungri and Yangpori are distributed on a large scale at the subsurface between Duksungri and Ochun, and Daegokri and Yangpori. Along the survey line between Angangri and Byungpori, it is exposed at Angangri, and extends underneath Chungrimdong, Pohang city. Andesite is distributed on a small scale underneath Pohang city and Ochun. The thicknesses of Tertiary Yonil and Janggi Groups are 0.2~0.9 km and 0.1~0.5 km, respectively. The Tuffaceous rocks which are the lowest formation of Tertiary sedimentary rocks are distributed with the thickness of 0.2 km at the surface and between Kyungsang Supergroup and Yonil or Janggi Groups. The Yonil and Janggi Groups are in fault contact by a fault running through Ochun and Chungrimdong, Pohang city. Two other faults are newly found near Heunghae-eup and Hyungsan river.

• 대한조선학회논문집
• /
• 제51권4호
• /
• pp.265-273
• /
• 2014

Wave-body interaction is simulated using a developed code based on the flux-difference splitting scheme for immiscible and incompressible fluids and the hybrid Cartesian/immersed boundary method. A free surface is captured as a moving contact discontinuity within a fluid domain and an approximated Riemann solver is used to estimate the inviscid flux across the discontinuity. Immersed boundary nodes are identified inside an instantaneous fluid domain near a moving body, then dependent variables are reconstructed at those immersed boundary nodes based on interpolation along local normal lines to the boundary. Free surface flows around an oscillating cylinder are simulated and the computed wave elevations are compared with other reported results. The generation of a solitary wave by a moving wave-maker is simulated and the time histories of wave elevations at two different points are compared with other results. The developed code is applied to simulate body motion of an elastically mounted circular cylinder as a solitary wave passes the body. The force acting on an elastically mounted cylinder is compared with the force acting on a fixed cylinder. Grid independency of the computed body motion is established based on a comparison of results using three different-size grids.

• 지질공학
• /
• 제7권2호
• /
• pp.101-112
• /
• 1997

단층의 위치와 기하학적 형태를 결정하기 위하여 장성호 하류지역에서 광주단층을 가로 지르는 측선을 설정하여 중력과 전기 비저항 탐사를 수행하였다. 비저항탐사에서는 3개의 측선에 대하여 쌍극자법을 적용하였으며, 각 측선의 길이는 500m이고 전극간격은 25m이다. 비저항자료는 비저항해석에 널리 사용되고 있는 컴퓨터프로그램 "RESIS"를 이용하여 해석하였으며, 3개 측선에 대한 비저항 단면도를 얻었다. 이 단면도를 해석한 결과 광주단층과 관련된 두 개의 큰 파쇄대가 인지되었다. 중력은 측선상에서 평균 40m 간격으로 총 80개를 측정하였으며, 좀 더 정밀한 Bouguer 이상값을 얻기 위하여 간이 수준측량을 병행하였다. 역해법으로 결정한 지하밀도불연속면의 깊이는 약 650m와 120m에 나타나며, 전자는 쥬라기 화강암류와 백악기 화산암류의 경계를, 후자는 충적층의 깊이를 나타내는 것으로 생각된다. 역해법으로 얻어진 결과와 기존의 지질도, 지질단면도 및 전기비저항 연구결과를 초기모델로 하여 측정된 Bouguer이상을 만족하는 지하구조를 순해법으로 결정하였다. 그 결과 광주단층은 장력장내에서 형성된 고각의 정단층으로 나타났다.

• 한국통신학회논문지
• /
• 제35권8C호
• /
• pp.680-688
• /
• 2010

본 논문에서는 영상 분할(image segmentation)을 이용한 다이내믹 프로그래밍(dynamic programming, DP) 기반의 스테레오 정합 (stereo matching)기법을 제안한다. 다이내믹 프로그래밍은 스테레오 정합을 포함하는 여러 가지 컴퓨터 비젼 문제들의 고전적이고 인기가 있는 최적화 방법이다. 그러나 스테레오 정합 문제에 적용될 때 스캔라인들 사이의 수직 상호 관계가 적절하게 고려되지 않기 때문에 기존의 DP의 성능은 만족스럽지 않다. 본 논문에서 제안하는 알고리즘에서는 영상을 분할하여 정확한 경계정보를 획득한 다음 경계 정보에 의거하여 변이의 불연속과 폐색영역을 고려한다. Middlebury 스테레오 영상에 적용한 실험 결과들은 제안된 알고리즘이 이전의 다이내믹 기반 알고리즘보다 더 좋은 성능을 보여주는 것을 입증해준다.

• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.73-84
• /
• 2002

불규칙하고 복잡한 다층(multi-layer) VLSI 배선의 커패시턴스 추출을 위한 빠르고 정확한 새로운 방법을 개발하였다. 복잡한 다층 배선구조에서 3차원 field-solver를 사용하여 커패시턴스를 구하는 것은 현실적이지 않기 때문에 근사적 3차원 커패시턴스 추출 방법을 제안한다. 꺽이는 부분(bend)과 상이한 배선사이의 거리를 갖는 동일한 층내의 배선은 불연속한 부분과 만나는 곳을 분할하고 각각의 부분에 2차원 커패시턴스 추출 방법을 사용하여 커패시턴스를 추출하였다. 또한 차폐층(shielding layer)을 갖는 다층 배선 구조에서의 커패시턴스는 시스템 내의 전하의 분포를 조사함으로써 시스템을 간소화 시킨 후 평판 그라운드 기반 2차원 커패시턴스와 간단한 구조로부터 독립적으로 계산될 수 있는 차폐효과를 결합하여 근사적3차원 커패시턴스 추출 방법을 적용하였다. 불규칙한 다층 배선 구조에 대하여 설계된 레이아웃으로부터 해석적으로 구할 수 있는 변수와 평판 그라운드를 사용한 2차원 커패시턴스 추출 방법을 사용하므로 정확하면서도 신속하게 커패시턴스를 추출할 수 있어 일반적인 3차원 방법보다 비용 측면에서 훨씬 효과적이다. 제안된 근사적 3차원 방법을 통해 구한 커패시턴스는 3차원 field-solver를 기반으로 구한 커패시턴스와 오차율 5% 이내의 정확성을 나타낸다.

• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.521-527
• /
• 2010

포장궤도는 토공구간, 교량구간, 터널구간, 분기기구간 등 모든 구간에서 유지보수를 절감할 목적으로 적용한다. 토공구간에 포장궤도를 적용할 경우, 내구성에 가장 큰 영향을 미치는 것은 시공이음매부로서 구조적인 문제는 없으나 슬래브의 불연속으로 인한 단차가 발생하여 장기적인 사용성에 영향을 미칠 가능성이 있다. 따라서 이에 대한 검토를 위하여 실물의 포장궤도를 제작하여 시공이음매부와 연속부에서 가속실험을 실시하였다. 가속실험에서는 각 재하하중별 변위와 토압에 대한 경향을 비교함으로써 시공이음매부에서의 취약도를 평가하고자 하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.429-436
• /
• 2011

The selected physical and mechanical properties of non-certificated LVL circulated in domestic lumber market were investigated and compared to relevant standards. The tested LVL passed the moisture content and the soaking delamination rate limit as per domestic (KS) and Japanese standard (JAS). The evaluated mechanical properties were flatwise/edgewise bending strength, modulus of elasticity (MOE), horizontal shear and compressive strength. The 30 mm-thick LVL showed significantly higher bending strength than that of the 25 mm-thick LVL. The modulus of elasticity (MOE) showed same tendency in the results of bending strength. The edgewise bending strength and MOE were higher than that of flatwise bending strength and MOE. The horizontal shear strength values were also showed similar results to bending strength values. The tested results were compared each other and each products were graded according to JAS 701 grade specification. The failure mode of LVL in bending test showed the similar failure mode of solidwood that failed in a simple tension manner (splintery tension). The glue line failure was severe in 25 mm-thick specimens due to concentration of shear stress in layer discontinuity containing small voids and starved glue lines. In horizontal shear strength test, failure mode of LVL showed the typical horizontal shear failure. Compressive specimens failed with fiber crushing in company with apparent delamination that splitted along the length of the specimens. From the results, the complete bonding between lamination and consistency in thin veneer layer were considered as a critical factor in the mechanical properties of LVL. Moreover, the standard test procedure and specification for non-certificated LVL should be required to check the performance of uncertificated materials.