• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.254-262
• /
• 1980

A series of experiment were carried out to separate the factor accelerating the lysis of cell wall of $Saccharomyces\;sak{\acute{e}}$ from the preparation of crude zymolyase obtained from Arthrobacter luteus. An attempt was also made to purify the enzyme which is essential for the study on the separation of the factor. The results are summarized as follows: 1. Crude zymolyase was fractionated 5 peaks $(A{\sim}E)$ containing three peaks $(A{\sim}C)$ passed through the column by the chromatography on Biogel CM-30. 2. Among the five peaks, peak E (protease fraction) was found to contain the factor accelerating the lytic activity of the zymolyase. 3. L-c fraction purified in almost free form from the nonlytic ${\beta}-1$, 3-glucanase, protease and inert protein by the affinity adsorption chromatography with Sephadex G-75 gel was obtained from zymolyase fraction (peak D). When it was subjected to polyacrylamide gel disc electrophoresis, only one clear protein band was observed at pH 4. 5, but still detected two or more band at pH 8. 3.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.2
• /
• pp.71-96
• /
• 1977

Early development Linuparus trigonus(von Siebold) has been studied based on the samples collected monthly in Je-ju Island, Korea from February, 1975 to January, 1977. Gametogenesis, reproductive cycle, embryonic development were investigated by histological mettled, and morphological description was made on the first phyllosoma larva which reared in the laboratory. Testis is composed of two tubular duct which are symmetrical with H-shaped appearance. Outer layer of testis is of fibrous connective tissue capsule. In the lumen there is a convoluted seminiferous tubule with interstitial tissue. Ovary is a pair of symmetrical blind tubular lobes, and the midportions are connected each other. The ovary consists of a couple of ovarian sacs partitioned by two-layered connective tissue fibers. Proliferation of spermatogonia are observed all the year around on the germinal epithelium of seminiferous tubule. Partial spermatogenesis is always in progress, and the spermatozoa appear all the year around in the tubules. Nutrition of early oogonia is supplied by fibrous mesenchyme which is abundantly distributed in ovarian sacs. Oocytes grow and couplete maturation divisions in the follicle layers. They finally develop into mature ova before spawning. Reproductive cycle is classified into four successive stages; multiplication stage from September to December, growing stage from January to March, maturation division stage from April to May and mature stage from June to August. Spawning takes place from May to August with peak spawning from Into July to early August. Cleavage type is superficial. Blastopore is formed in blasto-disc region which is proliferation of blastoderm cells. Germinal layers are also derived from tile region. Mesoderm formation is originated from endodermal cells which are formed front the blasto-disc region. The endodermal cells are separated by the process of delamination from yolk sac and take part in the formation of the mid-gut. Morphological characteristics of first phyllosoma larva are different from the larvae of other Palinurid and Scyllarid species.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1979.05a
• /
• pp.6.2-6
• /
• 1979

Foreing bodies of the esophagus and tracheobronchus are likely to occur whenever a child places an inedible object in the mouth and are common in the older age group particularily in edentulous individuals or preexisting disease. Our department had already reported the statistical survey at first in 1954, successively in 1962, 1963 and 1968, respectively according to the age, sex, variety of foreign bodies, location and duration of the lodgement. Now, we have experienced the new 186 cases during the consecutive 5 year period from January 1973 to December 1977 and reported as a 5th report comparing with previous report. The results were as follows. 1. In the incidence of foreign bodies, coins were the most common and pointed metal, disc, bony fragment were followed in order in the esophagus while the peanut and corn were common in the air passage. 2) 79 cases (56.4%) were males and 61 cases (43.6%) were females in the esophagus, which was not a significant difference to note. But in the air passage, males accounted for 33 cases (71.7%) compared to 13 cases (28.3%) of females. 3) In the aspect of age incidence, child 10 years or under accounted for almost all cases in the esophagus as well as in the air passage. 4) In the location of foreign bodies in the esophagus, the first narrowing was the most common, while in the air passage right bronchus had a high incidence but the difference of incidence between right bronchus and left bronchus was not remarkable. 5) The duration of lodgement was 24 hours or less in more than half of the all cases. 6) In the aspect of kind of coin, 10 won coins accounted for majority of the cases (67.0%) but the incidence of 100 won coins were tend to increase gradually in these years.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.3
• /
• pp.313-320
• /
• 2014

In this study, the antimicrobial activity of niaouli leaf extracts was evaluated against skin flora. The skin flora used for experiments were three gram-positive bacteria such as Bacillus subtilis (B. subtilis), Staphylococcus aureus (S. aureus), Propionibacterium acnes (P. acnes), and two gram-negative, Escherichia coli (E. coli), Pseudomonas aeruginosa( P. aeruginosa), and the yeast, Plasmodium ovale (P. ovale). The bioassay applied for determining the antimicrobial effects of niouli leaf extracts or fraction included the disc diffusion assay and broth dilution assay. Minimum inhibitory concentration (MIC) values of 50% ethanol extract on B. subtilis, S. aureus, P. acnes, E. coli and P. aeruginosa were 0.25%, 0.50%, 1.00%, 0.13% and 0.25% respectively and the MIC values of water fraction were 0.25%, 0.25%, 4,00%, 0.25% and 0.25%. P. ovale did not show antimicrobial activities. The MIC values of methyl paraben used as positive control indicated 0.25%, 0.25%, 0.25%, 0.13% and 0.50%. Also, Minimum bactericidal concentration (MBC) values of 50% ethanol extract were 2.00%, 2.00%, 1.00%, 0.50% and 2.00% individually and the MBC values of water fraction were 0.50%, 0.25%, 4.00%, 0.50% and 1.00%. The MBC values of methyl paraben indicated 1.00%, 0.500%, 0.50%, 0.50% and 1.00%. These results showed that water fraction was as good as methyl paraben except for P. acnes. The 50% ethanol extract also showed activity similar with it. Thus, it is concluded that the 50% ethanol extract/fraction of niaouli could be applicable to cosmetics as a natural preservatives effective in antimicrobial activity against skin flora.

• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.409-420
• /
• 2009

The aim of this study was to investigate clinical assessment, panorama & MRI findings and cephalometric characteristics in 42 patients with condylar resorption, who visited in the Department of Oral Medicine Kyungpook National University Hospital at 2006. The results were as follows; 1. Clinical assessment 1) Female was 34 and male was 8, females were predominant. Distribution of age showed as follows; 10s was 14, 20s was 13, 30s was 7, 40s was 3, 50s was 4 and 60s was 1 patient. 10s and 20s were predominant. 2) Most of the patients had parafunctional habit. 2. Findings of panorama & MRI 1) Most of the patients had degree of Grade II condylar resorption by panorama taking. 2) Most of the patients had disc dislocation and belonged to the degree of stage IV by MRI taking. 3. Cephalometric Characteristics 1) SN, SAr and saddle angle in female patients were significantly smaller and SN in male patients showed only significantly smaller than normal group. 2) SNA showed no difference from the normal group in both patients. SNB was smaller and ANB was lager in female patients than normal group. 3) SN-GoMe and FMA increased in patients. 4) Total posterior facial height & ramus height were significantly smaller. 5) Mandibular body length did not show any significant difference.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.994-1002
• /
• 2009

A bacteriocin-producing bacterium identified as Bacillus licheniformis was isolated from soybean sauce. Antibacterial activity was confirmed by paper disc diffusion method, using Micrococcus luteus as a test organism. The bacteriocin also showed antibacterial activities against Bacillus sphaericus, Lactobacillus bulgaricus, Lactobacillus planiarum, Paenibacillus polymyxa, and Pediococcus dextrinicus. Optimal culture conditions for the production of bacteriocin was attained by growing the cells in an MRS medium at a pH of 6.5~ 7.0 and a temperature of 37$^\circ$C for 36$\sim$48 hr. Solvents such as chloroform, ethanol, acetone, and acetonitrile had little effect on bacteriocin activity. However, about 50% of bacteriocin activity diminished with treatment of methanol and isopropanol at the final concentration of 50% at 25$^\circ$C for 1 hr. It was stable against a pH variation range from 3.0 and 7.0, but the activity reduced to 50% at a pH range from 9.0 to 11.0. It's activity was not affected by heat treatment at 100$^\circ$C for 30 min and 50% of activity was retained after heat treatment at 100$^\circ$C for 60 min, showing high thermostability. The bacteriocin was purified to a homogeneity through ammonium sulfate precipitation, SP-Sepharose ion-exchange chromatography, and reverse-phase high-performance liquid chromatography (HPLC). The entire purification protocol led to a 75-fold increase in specific activity and a 13.5% yield of bacteriocin activity. The molecular weight of purified bacteriocin was estimated to be about 2.5 kDa by tricine-SDS-PAGE.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.502-508
• /
• 2009

Antimicrobial activity of Sargassum thunbergii was determined by paper disc assay and minimum concentration inhibitor (MIC) test. A water extract of S. thunbergii did not show the antimicrobial activity, but an ethanol extract of S. thunbergii (SHE) inhibited Serratia liquefaciens, Salmonella Typhimurium, Pseudomonas aerogenosa and all of the tested gram-positive bacteria at 4 mg/mL. Especially, Bacillus subtilis, Clostridium perfringens and Listeria monocytogenes were susceptible to SHE. As the results of MIC test, SHE inhibited the growth of B. subtilis, Staphylococcus aureus and Listeria monocytogenes at concentration of $0.1{\sim}0.3%$, and inhibited C. perfringens at 0.01%. In the thermal and pH stability test for SHE, antibacterial activities of SHE were maintained when the SHE was treated at $121^{\circ}C$ for 15 minutes or under pH $2{\sim}8$. SHE was partitioned in the order of n-hexane, chloroform, ethyl acetate and butanol. As the results of the MIC test for each obtained fraction, no fraction exhibited higher antibacterial activity than that of the crude SHE. However, a mixture of chloroform, ethylacetate and ethanol fractions showed higher antibacterial activity than SHE.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.