• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.147-156
• /
• 2020

The author Nakajima was involved in the field of disaster communications and emergency medical care as guest research scientist at the Fukushima Nuclear Accident Independent Investigation Commission established by the National Diet of Japan and reviewer of the Commission's report, and Kurokawa was the chairman of this Commission. Looking back over a decade, we are on the liability issue of bureaucrats and telecom operators, so it's becoming clear what was hidden at the time. The battery of NTT DoCoMo's mobile phone repeaters had a capacity of only about 24 hours, and communication failures increased after one day. The Government also failed to issue an announcement of "Vent from reactor" under the Telecommunications Act Article No. 129. This mistake lost the opportunity to use the third-party telecommunications (e.g. taxi radios). Furthermore, as a result of LASCOM (telecommunications satellite network for local governments via GEO) and a variety of unexpected communication failures, the evacuation order "Escape!" could not be notified to the general public well. As a result, the general public was exposed to unnecessary radiation exposure. Such bureaucratic slow action in emergencies is common in the response to the 2020 coronavirus.

• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.436-441
• /
• 2016

Background: Although nuclear disaster is considered rare, its effects are serious, and we must prepare a system to enable an effective response. Materials and Methods: Since 2010, we have been offering a two-day seminar to provide current nurses and radiological technologists with basic knowledge and train them in radiation emergency medicine (REM) techniques. This training offers lectures to deepen each specialty from the perspective of REM, as well as exercises on ways to handle irradiated and/or contaminated patients. Participants were expected to treat patients according to the concept of REM. Results and Discussion: All participants learn to assess and decontaminate contaminated wounds through drills. The questionnaire survey for participants indicated that participants were satisfied with this training and wanted to attend again. Conclusion: We believe that this training course will provide a valuable opportunity for medical professionals to gain knowledge and expertise in REM.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.95-103
• /
• 2019

Safety and welfare of forestry is very poor because of poor working environment, decreasing workforce and budget, and aging. These have brought many accidents and casualties. The accident rate in the field of forestry were about 2.83 times higher than average of an entire industry and mortality rate were 1.84 times higher than it. The most reason among the mortality accident was caught in, under or between objects and struck by objects. In analysis of 60 serious accident cases, the number of occurrence s of caught in, under or between objects and struck by objects were the highest. We suggest education, engineering, environment, and enforcement methods which is first aid education and emergency response system, equipment of combined IoT technologies and sensors, and certification and career program on the basis of the results.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.105-110
• /
• 2019

Most titanium alloy waste with cutting oil was discarded without recycling process so that it can be caused by metal and oil fires. However, there is no fire management system and studies on the titanium or titanium alloy waste in spite of high fire risk. The purpose of this experimental study is to identify the fire risk of the titanium alloy waste with cutting oil. We collected the 120g waste which was made in the biomedical titanium alloy cutting process. The waste was burned and conducted thermal image analysis with infrared camera. The experimental results which illustrated the process, characteristics, and trends of fire are presented. Firstly, the cutting oil was burned and partially the titanium alloy waste was burned. The maximum temperature of the fire was more than $650^{\circ}C$ in some specific spots. These results means when a lot of titanium alloy waste with cutting oil was ignited, this fire could connect the titanium fire. In other words, the fire has a flammable liquid fire and combustible metal fire at the same time. The experimental study could be used fire prevention, response, and investigation of the titanium alloy waste.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.474-484
• /
• 2018

In this study, a new numerical modeling system was proposed to predict oil spills, which increasingly occur at sea as a result of abnormal weather conditions such as global warming. The hydrodynamic conditions such as the flow velocity needed to calculate oil dispersion were estimated using a three dimensional hydrodynamic model based on the Navier-Stokes equation, which considered all of the physical variations in the vertical direction. This improved the accuracy compared to those estimated by the conventional shallow water equation. The advection-diffusion model for the spilled oil was combined with the hydrodynamic model to predict the movement and fate of the oil. The effects of absorption, weathering, and wind were also considered in the calculation process. The combined model developed in this study was then applied to various test cases to identify the characteristics of oil dispersion over time. It is expected that the developed model will help to establish initial response and disaster prevention plans in the event of a nearshore oil spill.

• Structural Engineering and Mechanics
• /
• v.83 no.6
• /
• pp.745-756
• /
• 2022

This study aims to determine the cause of the load resistance loss in storage racks that can be attributed to external forces such as earthquakes and to improve safety by developing reinforcement systems that can prevent load resistance loss. To this end, a static cyclic loading test was performed on pallet racks commonly used in logistics warehouses. The test results indicated that a pallet rack exposed to an external force loses more than 50% of its load resistance owing to the damage caused to column-beam joints. Three reinforcement systems were developed for preventing load resistance loss in storage racks exposed to an external force and for performing differentiated target functions: column reinforcement device, seismic damper, and viscoelastic damper. Shake table testing was performed to evaluate the earthquake response and verify the performance of these reinforcement systems. The results confirmed that, the maximum displacement, which causes the loss of load resistance and the permanent deformation of racks under external force, is reduced using the developed reinforcement devices. Thus, the appropriate selection of the developed reinforcement devices by users can help secure the safety of the storage racks.

• Earthquakes and Structures
• /
• v.22 no.3
• /
• pp.263-275
• /
• 2022

Structural collapses can occur as a result of a dynamic amplification of either, the building's seismic response or the ground shaking by local site effects; one of the reasons is a resonance effect due to the proximity of the structural elastic fundamental period TE and the soil fundamental period TS. We evaluate the vulnerability to resonance effects in Guadalajara, México, in a three-step schema: 1) we define structural systems in the building environment of western Guadalajara, in terms of their construction materials and structural components; 2) we estimate TE with different equations, to obtain a representative value in elastic conditions for each structural system; and, 3) we evaluate the resonance vulnerability by the analysis of the ratio between TE and TS. We observe that the larger the soil fundamental period, the higher the resonance vulnerability for buildings with height between 17 and 39 m. For the sites with a low TS, the most vulnerable buildings will be those with a height between 2 and 9 m. These results can be a helpful tool for disaster prevention, by avoiding the construction of buildings with certain heights and structural characteristics that would result in a dangerous proximity between TE and TS.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.4 s.19
• /
• pp.95-105
• /
• 2005

Korea is located away from plate boundaries which are not safe from earthquakes. However, having witnessed the large-scale earthquake in the Tangshan region in 1976 deemed as a safe plate, it should not be assured that Korea is absolutely safe from earthquakes. In addition, many seismologists have claimed that there indeed is a high possibility of earthquakes above mid scale that would occur in Korea. Because it is impossible to prevent earthquake, studies on seismic design and earthquake disaster control system are widely being conducted. However, studies on early response to earthquakes or recovery process are still very limited, and only a few studies for establishing earthquake damage evaluation system are being conducted. Thus, this study aimed to present essential data for establishing earthquake damage evaluation system that takes into account the real situation of structures in Korea. In this study, a nonseimically reinforced concrete apartment structure in Gangnamgu was selected as an standard type of such structures and its earthquake damage was estimated. The result of damage evaluation based on the derivation of vulnerability function and realtive story displacement was compared to that abtained using HAZUS Program Vulnerability Function.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.43-50
• /
• 2021

As the frequency of earthquakes in some regions including Pohang City has increased in recent years, the need for countermeasures against earthquakes in Korea is demanded from various aspects. Liquefaction occurred after the earthquake, and local residents' anxiety increased due to the lack of preparation for and coping with the earthquake. In order to cope with these phenomena and relieve the anxiety of local residents, we analyze the limitations of the existing earthquake response system and come up with a method to solve them. Therefore, we propose, implement, and prove the possibility of a one-stop mobile support diffusion system capable of expressing and spreading evaluation-based earthquake information that can actively cope with disaster situations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1205-1212
• /
• 2022

Cyber threat targeting ICS (Industrial Control System) has indicated drastic increases over the past decade and Cyber Incident in Critical Infrastructure such as Energy, Gas Terminal and Petrochemical industries can lead to disaster-level accidents including casualties and large-scale fires. In order to effectively respond to cyber attacks targeting ICS, a multi-layered defense-in-depth strategy considering Control System Architecture is necessary. In particular, the centralized security log system integrating OT (Operational Technology) and IT (Information Technology) plays an important role in the ICS incident response plan. The paper suggests the way of implementing centralized security log system that collects security events and logs using OPC Protocol from Level 0 to Level 5 based on IEC62443 Purdue Model to integrate ICS security logs with SIEM (Security Information Event Management) operated in IT environment.