• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.157-160
• /
• 2002

In this paper, a novel lumped equivalent circuit for a conventional parallel directional coupler is proposed. The equivalent circuit and design formula for the presented lumped element coupler is derived based on the even-and odd-mode properties of a parallel-coupled line. By using the derived design formula, we have designed the 3㏈ and 10㏈ lumped element directional couplers at the center frequency of 100Mhz. Furthermore, a chip type directional coupler has been designed to fabricate with multilayer configurations by employing the Low Temperature CofiredCeramic (LTCC) process. Designed chip-type directional coupler has a 10㏈-coupling value at the center frequency of 2㎓. Excellent agreements between simulations and measurements on the designed directional couplers show the validity of this paper

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.12-16
• /
• 2004

We show that the extinction ratio is improved using slight asymmetry in two core refractive indices of polarization independent very short vertical directional couplers with the double-sided deep-ridge (DSDR) waveguide structure. The optimum asymmetry with the maximum extinction ratio and the tolerance of the refractive index of core with the extinction ratio larger 1ha]1 30 ㏈ increase as the thickness of inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. Also, the device length and the tolerance of the device length with the extinction ratio larger than 30 ㏈ decrease as the thickness of the inner cladding layer and the two cores decrease due to the increase of the coupling strength between the two cores. We show that polarization independent vertical directional couplers with the DSDR waveguide structure with the device length less than 100 ${\mu}{\textrm}{m}$ and the extinction ratio larger than 30 ㏈ could be implemented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1004-1010
• /
• 2003

In this paper, the 1/4 wavelength backward-wave directional coupler using coupled lines with finite metallization thickness is described. A mode-matching method, simple and fast approach to the quasi-static analysis, has been used to analyse this structure. The numerical results show that it is possible to overcome the disadvantages of weakly coupling, low directivity, and narrow strip distance non-realizable in the case of 1/4 wavelength backward-wave directional coupler with zero thickness conductor. It is also revealed that thicker metallization causes longer coupler length in the case of backward-wave symmetrical parallel coupled line directional coupler. The finite metallization thickness can be a new parameter for tight coupling in the design of backward-wave directional couplers, which enables us to design more accurate properties of monolithic microwave integrated circuits.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.508-511
• /
• 2002

By defining a power distribution ratio (PDR) and coupling efficiency (CE) amenable to the rigorous analytical solutions of newly developed rigorous modal transmission-line theory (MTLT), we explicitly analyze the power coupling characteristics of TE modes propagating in GADCs. The numerical results reveal that the incident power is optimally coupled into the desired guiding channel if the powers of rigorous modes excited at the input boundary of grating-assisted coupler are equally partitioned.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.288-291
• /
• 2003

Nowadays, the study on the ceramic components and modules used in telecommunication system is being performed. Coupler is a microwave passive component used for power coupling or dividing and directional coupler is designed to be possible optional dividing percentage. In our research, We developed 14dB and 19dB directional couplers of EGSM band. The good characteristics, the target insertion loss and high isolation, of couplers is obtained by LTCC processing using a ceramic material.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.373-376
• /
• 2002

An asymmetrical directional coupler with two nonidentical fibers has, for the first time, been proposed and analyzed for an EDFA gain flattening filter (GFF). The characteristics of the transmission spectra of the GFFs have been theoretically investigated for the core spacings, the coupling lengths and the fiber parameters of the asymmetrical directional coupler. The analytical results show that an EDFA gain spectrum with flatness of ~7 ㏈ can be flattened to within $\pm$0.75 ㏈ over a bandwidth of 30 nm by using the asymmetrical directional coupler-based GFF.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.171-176
• /
• 2014

The polarization characteristics of ultracompact polarization-insensitive directional coupler (PIDC) based on double sandwiched rib-type waveguide are explored in detail by using longitudinal modal transmission-line theory (L-MTLT). To obtain the polarization-insensitive condition of ultracompact directional coupler, the coupling length and coupling efficiency as functions of the refractive index and thickness of sandwiched rib-type waveguide are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the ultracompact polarization-insensitive coupler with hundreds of micrometer scales is realized by properly choosing structural and material parameters of double sandwiched layers. Furthermore, the influence of fundamental mode profile, which is distributed in lateral waveguide of coupler, on the coupler performance has been investigated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.996-1003
• /
• 2003

There are critical drawbacks in fabricating MMIC transversal filters because the length of the conventional transversal filter structure is much longer than the width. In order to solve this structural problem, a transversal filter using multiple-coupled-line directional couplers which can achieve tight coupling is proposed. The length of the proposed transversal filter can be made short using multiple-coupled-line couplers so that the structure of the proposed filter is applicable to MMIC technology. Because of the dielectric and conductor losses, the excited signal at the input port becomes smaller when it progresses through each directional coupler. Therefore, the strength of the coupled signals at the latter directional couplers becomes smaller than the designed one and this, in turn, gives rise to performance aggravation. A modified coupling coefficient formula to prevent frequency characteristic degradation is introduced. The proposed filter structure and the design method are verified by the calculated result and 3D full-wave analysis.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.542-544
• /
• 2002

This paper proposes a wavelength sensor based on the optical directional coupler. The finite-difference time-domain (FDTD) is used in analysis of the field intensity of tile light propagating thorough the structure. The device with tile width of 0.4 $\mu\textrm{m}$ and the thickness of 0.4 $\mu\textrm{m}$, which corresponding with the coupling length of 40$\mu\textrm{m}$, would provide tile linear relationship between the coupling efficiency against the wavelength. The device can sense the wavelength in a range between 1.5$\mu\textrm{m}$ and 1.6$\mu\textrm{m}$, with continuous resolution. The wide wavelength could be also done be paralleling th light to a number of wavelength-sensing modules with particularly required bands. Therefore, it could be employed as the wavelength sensing for most optical communications, optoelectronics, laser applications and etc.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.54-62
• /
• 1998

The crosstalks of two-waveguide & three-waveguide directional couplers are analyzed. Advantages and disadvantages for each coupler are compared and discussed. Based on the relationship between the coupled mode and the normal mode, the mathematical expressions are derived in terms of the crosstalks for each directional coupler. Numerical techniques such as the finite-difference method and the beam propagation method are employed to testify the validity of the derived equations. The calculation results show that two-waveguide directional coupler is superior to any types of three-waveguide couplers from the practical viewpoint of the crosstalk and the coupling length.