• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.799-804
• /
• 2001

Nonlinear normal mode (NNM) vibration, in a nonlinear dual mass Hamiltonian system, which has 6th order homogeneous polynomial as a nonlinear term, is studied in this paper. The existence, bifurcation, and the orbital stability of periodic motions are to be studied in the phase space. In order to find the analytic expression of the invariant curves in the Poincare Map, which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space, Whittaker's Adelphic Integral, instead of the direct integration of the equations of motion or the Birkhotf-Gustavson (B-G) canonical transformation, is derived for small value of energy. It is revealed that the integral of motion by Adelphic Integral is essentially consistent with the one obtained from the B-G transformation method. The resulting expression of the invariant curves can be used for analyzing the behavior of NNM vibration in the Poincare Map.

• Journal of Oral Medicine and Pain
• /
• v.41 no.1
• /
• pp.16-20
• /
• 2016

Purpose: Oral lichen planus (OLP) is relatively common mucosal disease in clinical dentistry. OLP is intractable and regarded having malignant potential. Until now, there is some debate on how far OLP can be malignant, and which characteristics can be a risk factor for malignant transformation. Clinician need to know some differences between OLP and lesions similar to OLP to manage properly and suppose prognosis correctly. Therefore, the aim of this study was to divide clinical OLP into two groups and to compare the results of direct immunofluorescence (DIF) between two groups. Methods: This study was conducted on outpatients who visited at the department of Oral Medicine in Chonbuk National University Hospital from January 2007 to November 2015. Patients with DIF result were retrospectively reviewed. The selected patients were classified 'clinical typical of OLP' (CTO) or 'clinical compatible with OLP' (CCW) by modified World Health Organization diagnostic criteria of OLP and oral lichenoid lesion. Results: DIF were classified by deposition intensity or pattern of anti-human antibody and fibrinogen. The classification of fluorescence pattern in each specimen was graded as positive, possibly positive or negative. Conclusions: Both CTO and CCW had positive and possibly positive pattern. Prevalence of positive pattern was 68.8% in CTO and 52.6% in CCW and that of possibly positive pattern was 9.4% in CTO and 5.3% in CCW. Prevalence of negative was 21.8% in CTO and 42.1% in CCW.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.5
• /
• pp.741-757
• /
• 2021

In addition to direct sales to consumers, the direct-to-consumers (D2C) strategy, which provides specialized experiences and services, communicates closely with a consumer's perspective. This tendency is related to the recent trend wherein the luxury fashion system is being transformed into a new luxury. Therefore, this study analyzes the development of online D2C platforms and investigates the characteristics of new luxury from the functional, symbolic, and experiential dimension perspectives based on mobile apps, which is becoming increasingly important among online D2C platforms. Based on the study results, the premium of new luxury fashion displayed in Louis Vuitton's mobile D2C platform in terms of product utility and functionality is newly defined as a usable luxury experience. Moreover, from the heritage perspective, based on the cultural sympathy of the brand contents, we determine that an attachment can be formed between new luxury fashion consumers and brands. Additionally, the personalization service and experiential content on the D2C platform can directly afford emotional and bonding induced brand immersion in a playful way.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.285-286
• /
• 2002

The lubricating characteristics of negative pressure slider were performed by using divergence formulation method with the coordinate transformation method. This method makes it possible to deal with an arbitrary configuration of a lubricated surface. The pressure profile of the slider is calculated. These results are compared to that from direct numerical method. The steady-state, including minimum film thickness, pitching and rolling angle are calculated by multi-dimensional Newton-Rapson method. The stiffness and damping characteristics are also calculated.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.683-688
• /
• 2017

The unscented Kalman filter features a direct transforming process involving unscented transformation for removing the linearization process error that may occur in the extended Kalman filter. This paper proposes a reduced-order unscented Kalman filter for the sensorless control of a permanent magnet synchronous motor. The proposed method can reduce the computational load without degrading the accuracy compared to the conventional Kalman filters. Moreover, the proposed method can directly estimate the electrical rotor position and speed without a back-electromotive force. The proposed Kalman filter for the sensorless control of a permanent magnet synchronous motor is verified through the simulation and experimentation. The performance of the proposed method is evaluated over a wide range of operations, such as forward and reverse rotations in low and high speeds including the detuning parameters.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.102-111
• /
• 2000

Methodology of volumetric error identification and compensation is presented to improve the accuracy of NC machine tools by using a reference artifact and a touch trigger probe. Homogeneous transformation matrix and kinematic chain are used for modeling the geo-metric and thermal errors of a three-axis vertical machining center. The reference artifact is designed and fabricated to identify the model parameters by machine tool metrology. Parameters in the error model are able to be identified and updated by direct measurement of the reference artifact on the machine tool under the actual conditions which include the thermal interactions of error sources. A volumetric error compensation system based on IBM/PC is linked with a FANUC CNC controller to compensate for the identified volumetric error in machining workspace.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.388-393
• /
• 1988

New circuit D-Q transformation concept is introduced to analyze AC converters such as inverters, rectifiers and cyclo-converters with ease. The equivalent linear time invariant circuit is obtained by substituting switches with equivalent turn-ratio variable transformers and changing balanced AC reactors into equivalent DC reactors combined by gyrators. This circuit enables us to utilize the powerful linear system analysis techniques such as Laplace transform otherwise which could not be applied to the time varying switching systems. Direct substitution of switches of DC converters with transformers is shown as a preliminary. Then the modeling procedure is shown for a controlled rectifier-inverter circuit. Finally an analysis example is proposed for a buck-boost inverter and the result is compared with the conventional approach. This approach is applicable to all AC converter families to determine the AC transfer functions and the DC operating points. It is identified that the switching systems are equivalent to the RLC filter circuits with transformers and gyrators.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.2899-2908
• /
• 2000

Methodology of volumetric error identification is presented to improve the accuracy of NC machine tools by using a reference artifact and a touch trigger probe. Homogeneous transformation matrix and kinematic chain are used for modeling the geometric and thermal errors of a three-axis vertical machining center. The reference artifact is designed and fabricated to identify the model parameters by machine tool metrology. Parameters in the error model are able to be identified and updated by direct measurement of the reference artifact on the machine tool under the actual conditions which include the thermal interactions of error sources. The proposed method can speed up and simplify volumetric error identification processes.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.06a
• /
• pp.3-8
• /
• 2005

The robot systems are widely used in the welding manufacturing. The essential tasks to operate the welding robot are the acquisition of the position and/or shape of the parent metal. For the seam tracking or the robot automation, many kinds of contact and non-contact of the system which monitors the shape of the welding part is described. This system uses the line-type structured laser diode and the visual sensor. It includes the correction of radial distortion which is often found in the image from the camera with short focal length. Direct Linear Transformation (DLT) is used for the camera calibration. The three dimensional shape of the parent metal is obtained after simple linear transformation. Therefore, the system operates in real time. Some experiments are carried out to evaluate the performance of the developed system.

• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.583-592
• /
• 2007

Given the moments of a symmetric random variable, its density and distribution functions can be accurately approximated by making use of the algorithm proposed in this paper. This algorithm is specially designed for approximating symmetric distributions and comprises of four phases. This approach is essentially based on the transformation of variable technique and moment-based density approximants expressed in terms of the product of an appropriate initial approximant and a polynomial adjustment. Probabilistic quantities such as percentage points and percentiles can also be accurately determined from approximation of the corresponding distribution functions. This algorithm is not only conceptually simple but also easy to implement. As illustrated by the first two numerical examples, the density functions so obtained are in good agreement with the exact values. Moreover, the proposed approximation algorithm can provide the more accurate quantities than direct approximation as shown in the last example.