• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.183-191
• /
• 2008

In this paper, we propose Stream Control Transmission Protocol(SCTP) proxy which supports making an SCTP connection from a Corresponding Node(CN) to a Mobile Node(MN). Recently, mobility support in transport layer is proposed, which provides mobility in end-to-end way using the extension of SCTP. Mobile SCTP can provide handover to all applications that use SCTP as a transport protocol. However, current SCTP does not include independent location management service and can not make connection from a CN to a MN without assistance of other mobile protocols. To solve this problem, Proposed SCTP proxy interoperates with generic location management service and performs an address transformation to forward connection set up messages to the MN. Using the proposed proxy, SCTP can provide a complete mobility support including a connection setup to the MN and maintaining an existing connection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.302-313
• /
• 2003

Currently, DTD(Document Type Definition) Definition of Music score has been widely studied according to applications, and the methods of automatic transformation from defined DTD to XML Schema is in progress. In addition, studies of structure of DTD definition are focused on the expression of music information by individual format. In this paper, expression method of the music information by continuous string values is suggested using the fact that measure is basically a component of score, and XML Schema is also modelled. In addition, mechanism extracting the music information from XML instance which was expressed using the proposed method is presented. As a result, XML Schema taking the continuous string values could be defined, instance obtained by the proposed method results in increasing efficiency by simplicity of XPATH and reduction of search step compared to previous method. In addition, it is possible for human to make direct expression, and it is known that the instance size decreases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.1-10
• /
• 1989

In this paper, dynamic response of a truss bridge due to constantly moving train loads is analysed. Dynamic response of the bridge is found by the mode superposition method with the solution of the eigenvalue problem by Householder transformation and QL algorithm. To prove the validity of the analysis procedure, the response due to a very slowly moving load is compared with the result from the static analysis program, and the dynamic response is also compared with the result from the direct integration method. Based upon this, the variation of dynamic amplification factors is investigated by changing the train types and speeds, and the result is compared with the code specified impact factor. From this study, it was known that the dynamic amplification factor is not quite different by train types in low speeds but in high speeds it is, and in the case of electric car and U. I. C. loads the factor could exceed the code specified impact factor depending upon the speed.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.562-566
• /
• 1993

The conditions required for plant transformation through the electroporation system and for the electrofusion of the prtoplasts were investigated for geranium (Pelargonium zonale hybrids). The optimum condition for electroporation was 1.77 kV/cm for $40\;{\mu}sec$ under which 70% of the protoplasts were viable and 58% of the viable protoplasts were stained with methylene blue. The pBin19 DNA plasmid used as a carrier vector was isolated from E.coli $DH5{\alpha}$ strain, purified, identified by the electrophoresis on agarose gel and electroporated into the protoplasts. The KM8 liquid medium gave better cell division than any other media. One MHz of AC frequency with 40 V/cm of amplitude for 15 sec followed by 0.5 kV/cm of DC amplitude for $60\;{\mu}sec$ was most efficient for the electrofusion of protoplasts.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.125-134
• /
• 2006

The purpose of this study was to analyze the Biomechanical elements by looking at the differences on the motions of the right and left spikes of right-handed offense volleyball players, using 3D image analysis and force platform. For that purpose, spike motions of six male university volleyball players were recorded three times each using two 16mm high speed cameras and the speed of recording was set at 60 frames/sec. The coordinated raw data was leveled as 6Hz using low pass filtering method and the calculation of 3D coordinates was done by using a DLT (Direct Linear Transformation) method. Also KWON 3D program was used to analyze the variables. Through the experiments and research, the following results were found: That is, in case of the right spike, the required time from the toss to the impact, which affected the success rate of offense showed as longer and on the take-off, the exact timing to touch the ball was longer because the pace between right and left feet was wider, and also after the jump, the distance between the feet indicated shorter, than the left. In addition, the degree of somersault and horizontal adduction of shoulder joint was smaller and the degree of medial rotation of shoulder joint showed bigger than the left, so it indicated that it was not centered on the body, but by the arm with an axis of shoulder using a swing motion. After the impact, the speed of the ball indicated slower compared to the left spike.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.115-124
• /
• 2006

This study was conducted to investigate the running motion in the max-velocity phase(150-160m) and the fatigue phase(350-360m) during 400m sprint by performed elementary school athletes. Eighteen elementary school male athletes who achieved at least the 3rd place in the sprint at the Korea Gangwon-Do elementary school track and field meetings during 2004 and 2005 were selected as subjects. The running motions performed by the subjects were recorded using two 8mm high speed cameras at the nominal speed of 100 frames per second. The Direct Linear Transformation technique was adopted from the beginning of filming to the final stage of data extraction. KWON 3D motion analysis package program was used to compute the 3 Dimensional coordinates, smoothing factor in which lowpass filtering method was used and cutoff frequency was 6.0 Hz. The movement patterns during foot touchdown and takeoff for the running stride were related with the biomechanical consideration. Within the limitations of this study it is concluded: In order to increase running velocity, several conditions must be fullfilled at the instant of leg touchdown and takeoff during the fatigue phase(350-360m). First, the body C.O.G(Center of Gravity) height should be raised at the instant of leg touchdown and takeoff during the fatigue phase. Second, the foot contact time should be shortened and the takeoff distance should be increased at the foot takeoff during the fatigue phase. Third, the shank angular velocity with respect to a transverse axis through the center of gravity should be increased during the leg touchdown and takeoff in the fatigue phase. Forth, the active landing style described as clawing the ground with the sole of the foot should be performed during the leg touchdown and takeoff in the fatigue phase) phase. Fifth, In order to increase running velocity in the fatigue phase while taking a slightly greater leg knee angle and body lean angle within the range of the subject's running motion during the fatigue phase would result in greater flight distance.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.2
• /
• pp.73-81
• /
• 2007

An efficient regeneration system was developed using leaf, petiole, and internode explants. Highly embryogenic callus was obtained following cultivation on MS basal nutrient supplemented with 2 $mg/{\ell}$ 2,4-D. Globular, heart, torpedo and cotyledon shaped somatic embryo were produced from the surface of embryogenic callus. Direct shoot regeneration without intermediate callus formation has been achieved on MS medium supplemented NAA and BAP. The percentage of response varies with different concentration of auxin and cytokinin treated individually or in combination. The best shoot regeneration response (54.28%) and number of shoot per explant (12.67) were achieved on the medium supplemented with 0.1 $mg/{\ell}$ NAA and 1 $mg/{\ell}$ BAP. The regenerated shoot transformed into young plant when cultured into elongation and root induction medium. More than 90% of in vitro propagated plants could survive when transferred to the greenhouse for acclimation. This optimized regeneration system can be used for rapid shoot proliferation and genetic transformation.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.4
• /
• pp.414-427
• /
• 2006

This paper presents an adaptive feedback linearization control scheme for induction motors with simultaneous variation of rotor and stator resistances. Two typical modeling techniques, rotor flux model and stator flux model, have been developed and successfully applied to the controller design and adaptive observer design, respectively. By using stator fluxes as states, over-parametrization in adaptive control can be prevented and control strategy can be developed without the need of nonlinear transformation. It also decrease the relative degree for the flux modulus by one, thereby, yielding, a simple control algorithm. However, when this method is used for flux observer, it cannot guarantee the convergence of flux. Similarly, the rotor flux model may be appropriate for observers, but it is not so for adaptive controllers. In addition, if these two existing methods are merged into overall adaptive control system, it brings about structural complexies. In this paper, we did not use these two modeling methods, and opted for the airgap flux model which takes on only the positive aspects of the existing rotor flux model and stator flux model and prevents structural complexity from occuring. Through theoretical analysis by using Lyapunov's direct method, simulations, and actual experiments, it is shown that stator and rotor resistances converge to their actual values, flux is well estimated, and torque and flux are controlled independently with the measurements of rotor speed, stator currents, and stator voltages. These results were achieved under the persistent excitation condition, which is shown to hold in the simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.69-76
• /
• 2007

The main stream of presentation is interrupted because of the direct manipulation of their PC frequently so as to control the screen and file open and so on. A variety of products have been developed to solve these inconveniences of the conventional laser beam pointer [LBP] by simply adding a mouse function to the previous LBP. However. the LBPs fully supporting a mouse function are not yet appeared. In this paper. we developed the LBP fully fulfilling a mouse function using mono-camera as well as a robust image processing and analyzed the position detection accuracy. Finally we verified the developed LBP does not only fulfill a mouse function but also solve the defects of the current laser pointer such as inconvenient installation and Position detection errors due to the illumination and viewing direction changes.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.65-73
• /
• 2013

Ground-coupled heat pump system has attracted attention as a promising renewable energy technology due to its improving energy efficiency and eco-friendly mechanism for space cooling and heating. Pipes buried in the ground play a role of direct thermal interaction between circulating fluid inside the pipe and surrounding soils in the geothermal exchange system. However, both complexities of turbulent flow coupling thermal-hydraulic phenomena and very long aspect ratio of the pipe make it difficult to model the heat exchange system directly. Energy balance for fluid flow inside the pipe was derived to model thermal-hydraulic phenomena, and one-dimensional pipe element was proposed through Galerkin formation and time integration of the equation. Developed element is combined to pre-developed FEM code for THM phenomena in porous media. Numerical results of Thermal Response Test showed that line-source model overestimates equivalent thermal conductivity of surrounding soils due to thermal interaction between adjacent pipes and finite length of the pipe. Thus, inverse analysis for the TRT simulation was conducted to present optimal transformation matrix with utmost convergence.