• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.119-128
• /
• 2018

Limit state design has been implemented in Korea since 2015; however, there exists no specification of lateral load determination on retaining wall due to the Korean standard traffic load on retaining wall's backfill surface. The lateral load from traffic depends on lane number, standard truck's axle loads and locations, loading distance from the inner wall. The concept of equivalent height of soil accounting for traffic loadings is typically used for design of retaining walls to quantify the traffic loads transmitted to the inner wall faces. Due to the different characteristics of the standard design trucks between Korea and US (AASHTO), the direct use of the guidelines from AASHTO LRFD leads to incorrect estimation of traffic load effects on retaining walls. This paper presents the results of evaluation of equivalent height of soil to reflect the Korean standard truck, based on the findings from analytical solutions using Bounessq's theory and numerical assessment using 2D finite element method. Consequently, it was found that the equivalent heights of soil from the Korean standard truck load were lower for lower retaining wall height.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.2
• /
• pp.134-141
• /
• 2021

BACKGROUND: The analytical method was established for determination of fungicide chinomethionat in several animal commodities using gas chromatography (GC) coupled with electron capture detector (ECD). METHODS AND RESULTS: In order to verify the applicability, the method was optimized for determining chinomethonat in various livestock products including beef, pork, chicken, milk and egg. Chinomethionat residual was extracted using acetone/dichloromethane(9/1, v/v) with magnesium sulfate and sodium chloride (salting outassociated liquid-liquid extraction). The extract was diluted by direct partitioning into dichloromethane to remove polar co-extractives in the aqueous phase. The extract was finally purified with optimized silica gel 10 g. CONCLUSION: The method limit of quantitation (MLOQ) was 0.02 mg/kg, which was in accordance with the maximum residue level (MRL) of chinomathionate as 0.05 mg/kg in livestock product. Recovery tests were carried out at two levels of concentration (MLOQ, 10 MLOQ) and resulted in good recoveries (84.8~103.0%). Reproducibilities were obtained (Coefficient of variation <5.2%), and the linearity of calibration curves were reasonable (r²>0.995) in the range of 0.01-0.2 ㎍/mL. This established analytical method was fully validated and could be useful for quantification of chinomathionat in animal commodities as official analytical method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.301-308
• /
• 2021

It is important to develop a digital SOC (Social Overhead Capital) maintenance system for preemptive maintenance in response to the rapid aging of social infrastructures. Abnormal signals induced from structures can be detected quickly and optimal decisions can be made promptly using IoT sensors deployed on the structures. In this study, a digital SOC monitoring system incorporating a multimetric IoT sensor was developed for long-term monitoring, for use in cloud-computing server for automated and powerful data analysis, and for establishing databases to perform : (1) multimetric sensing, (2) long-term operation, and (3) LTE-based direct communication. The developed sensor had three axes of acceleration, and five axes of strain sensing channels for multimetric sensing, and had an event-driven power management system that activated the sensors only when vibration exceeded a predetermined limit, or the timer was triggered. The power management system could reduce power consumption, and an additional solar panel charging could enable long-term operation. Data from the sensors were transmitted to the server in real-time via low-power LTE-CAT M1 communication, which does not require an additional gateway device. Furthermore, the cloud server was developed to receive multi-variable data from the sensor, and perform a displacement fusion algorithm to obtain reference-free structural displacement for ambient structural assessment. The proposed digital SOC system was experimentally validated on a steel railroad and concrete girder bridge.

• The Journal of Korean Philosophical History
• /
• no.39
• /
• pp.143-168
• /
• 2013

The purpose of this paper is to study the succession and method of five-masters of southern school in transmitting the internal alchemy in Taoism which is established by Zhang Bo-duan. In history, the internal alchemy is divided into a few schools but all of them are under the umbrella of Zhang Bo-duan's alchemy. The five master's method has been consistent from Zhang Bo-duan to Seok Tae to Seol Do Gwang based on three reasons. First, they lived long while practicing the method. Second, they learned the method from their direct master secretly. Third, they kept practicing the individual method while staying in the secular world rather than in a religious body. I limit three of them Zhang Bo-Dan, Seok Tae, Seol Do Gwang as figures who practiced the pure internal alchemy. Thus I argue that the method stayed only for 200 years, arising from the late Dang Dynasty and disappearing in 1911, when Seol Do-Gwang was dead. This method can be instructed only to the appropriate figure, and the specific steps of method are taught through the oral instruction so that this method cannot be wide spread. Based on the fact that the time of practicing method is quite long and it needs intensive and constant efforts, it is difficult for a mundane person to practice and cope with the training. Jin Nam and Baek Ok Seom are believed that they belonged to the school of Shin So. Baek Ok Seom is regarded as a figure that made efforts to unite the school of Wei and the internal alchemy. However, he made lots of fabrication and discrepancy. Thus I state that Jin Nam and Baek Ok Seom need to be out in the succession and method of five masters of southern school in Taoism. Their changed method in quality needs to be organized in a new genealogy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.772-781
• /
• 2020

A direct shear member resists external forces through the shear transfer of reinforcing bars placed at the concrete interface. The current concrete structural design code uses empirical formulas based on the shear friction analogy, which is applied to the horizontal shear of concrete composite beams. However, in the case of a member with a large amount of reinforcing bars, the shear strength obtained through the empirical formula is lower than the measured value. In this paper, the limit state of newly constructed composite beams on an existing concrete girder is defined using stress field theory, and material constitutive laws are applied to gain horizontal shear strength while considering the tension-stiffening and softening effects of concrete struts. A simplified method of calculating the shear strength is proposed, which was validated by comparing it with the related design code provisions. As a result, it was confirmed that the method generally shows a similar tendency to the experimental results when the shear reinforcing bar yields, unlike the regulations of the design code, where differences in the predicted value of shear strength occur according to the shear reinforcement ratio.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1249-1249
• /
• 2022

The facade, an exterior material of a building, is one of the crucial factors that determine its morphological identity and its functional levels, such as energy performance, earthquake and fire resistance. However, regardless of the type of exterior materials, huge property and human casualties are continuing due to frequent exterior materials dropout accidents. The quality of the building envelope depends on the detailed design and is closely related to the back frames that support the exterior material. Detailed design means the creation of a shop drawing, which is the stage of developing the basic design to a level where construction is possible by specifying the exact necessary details. However, due to chronic problems in the construction industry, such as reducing working hours and the lack of design personnel, detailed design is not being appropriately implemented. Considering these characteristics, it is necessary to develop the detailed design process of exterior materials and works based on the domain-expert knowledge of the construction industry using artificial intelligence (AI). Therefore, this study aims to establish a detailed design automation algorithm for AI-based condition-responsive exterior wall panels and their back frames. The scope of the study is limited to "detailed design" performed based on the working drawings during the exterior work process and "stone panels" among exterior materials. First, working-level data on stone works is collected to analyze the existing detailed design process. After that, design parameters are derived by analyzing factors that affect the design of the building's exterior wall and back frames, such as structure, floor height, wind load, lift limit, and transportation elements. The relational expression between the derived parameters is derived, and it is algorithmized to implement a rule-based AI design. These algorithms can be applied to detailed designs based on 3D BIM to automatically calculate quantity and unit price. The next goal is to derive the iterative elements that occur in the process and implement a robotic process automation (RPA)-based system to link the entire "Detailed design-Quality calculation-Order process." This study is significant because it expands the design automation research, which has been rather limited to basic and implemented design, to the detailed design area at the beginning of the construction execution and increases the productivity by using AI. In addition, it can help fundamentally improve the working environment of the construction industry through the development of direct and applicable technologies to practice.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.2
• /
• pp.1-11
• /
• 2023

By delivering effective, in-situ conservation of biodiversity, OECMs can contribute to sustaining existing biodiversity values and improving biodiversity conservation outcomes. In this study, for the reporting of OECMs required by Kunming-Montreal Global Biodiversity Framework, the site-level assessment of the Korea National Arboretum and Buffer Zones were conducted using the assessment tool of IUCN. The site-level assessment was carried out in three steps(step 1: screening, step 2 : consent for full assessment, step 3 : the full assessment). It was found that the criteria were satisfied except for the consent for full assessment, sustainability of governance and management arrangements, and the equity of governance and management. Although the governing authority, rights-holders or any other stakeholders could be identified, the step of acknowledging and agreeing to the full OECM assessment was not possible because the governance was not established. As a result of the assessment of equitable governance and management in the aspect of recognition, procedure, and distribution based on criterion(the equity of governance and management), it is judged that more specific measures are needed in the aspect of recognition. And in the aspect of procedure, there is no legal basis for participation in governance and collection of opinions, so it is judged that there is a limit to listening and reflecting the opinions of stakeholders. In the aspect of distribution, it is necessary to further confirm whether it provides direct benefits to rights-holders such as landowners in the region. And it is necessary to prepare specific criteria to assess the important biodiversity values. Therefore, in order to promote OECM reporting in the future, it is necessary to conduct detailed research on various types of governance establishment and operation plans that can establish the basis for recognizing and agreeing to OECM assessment, specific criteria and reasonable measures to judge equity, and important biodiversity value.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.111-111
• /
• 2022

According to data from the Ministry of Environment, food waste accounted for 27% of the nation5 s household waste in 2020, and 4.67 million tons of food waste is being discharged per year. According to the Food Waste Direct Landfill Prohibition Act, food waste must be incinerated, composted, fodder, and decomposed before landfilling. The cost of incineration and landfilling of food waste is considerable. Therefore, through the process of turning food waste into fertilizer, we are going to investigate the limit of crop application and the change in the growth of crops during continuous use of food waste fertilizer. This study investigated the growth of lettuce such as shoot length, root length, leaf number, fresh weight, and dry weight after treating lettuce with food waste dry powder mixed fertilizer. The experiment was carried out continuously in 2021 (1st year) and 2022 (2nd year), and the treatment groups were set to No Treatment (NT), Chemical Fertilizer (CF), Mixed Fertilizer (MF×1), and Mixed Fertilizer×2 (MF×2), was repeated 3 times. As a result of the 1st year growth survey, there was no significant difference between NT and CF in the case of shoot length, but MF×1 and MF×2 were significantly decreased compared to NT. Root length was not significantly different in all treatment groups. As for the leaf number, there was no significant difference between NT and MF×1, but CF and MF×2 were significantly decreased compared to NT. In fresh weight, MF×1 and MF×2 were significantly decreased compared to NT, and in the case of dry weight, there was no significant difference between NT, MF×1, and MF×2. As a result of the 2nd year growth survey, there was a significant difference in CF and MF×2 in leaf number, but there was no significant difference in all treatment groups with respect to shoot length, root length, fresh weight, and dry weight. Through continuous additional research, it is necessary to confirm the change in soil composition and the growth of crops due to food waste fertilizer treatment.

• The Korean Journal of Air & Space Law and Policy
• /
• v.5
• /
• pp.101-118
• /
• 1993

Generally there is no law and liability system which applies particulary to commercial space ventures. There are several international treaties and national statutes which deal with space ventures, but their impact on the liability of commercial space ventures has not been significant. Every state law in the United States will impose both tort and contract liability on those responsible for injuries or losses caused by defective products or by services performed negligently. As with the providers of other products and services, those who participate in commercial space ventures have exposure to liability in both tort and contract which is limited to the extent of the resulting damage The manufacturer of a small and cheap component which caused a satellite to fail to reach orbit or to operate nominally has the same exposure to liability as the provider of launch vehicle or the manufacturer of satellite into which the component was incorporaded. Considering the enormity of losses which may result from launch failure or satellite failure, those participated in commercial space ventures will do their best to limit their exposure to liability by contract to the extent permitted by law. In most states of the United States, contracts which limit or disclaim the liability are enforceable with respect to claims for losses or damage to property if they are drafted in compliance with the requirements of the applicable law. In California an attempt to disclaim the liability for one's own negligence will be enforceable only if the contract states explicitly that the parties intend to have the disclaimer apply to negligence claims. Most state laws of the United States will refuse to enforce contracts which attempt to disclaim the liability for gross negligence on public policy grounds. However, the public policy which favoured disclaiming the liability as to gross negligence for providers of launch services was pronounced by the United States Congress in the 1988 Amendments to the 1984 Commercial Space Launch Act. To extend the disclaimer of liability to remote purchasers, the contract of resale should state expressly that the disclaimer applies for the benefit of all contractors and subcontractors who participated in producing the product. This situation may occur when the purchaser of a satellite which has failed to reach orbit has not contracted directly with the provider of launch services. Contracts for launch services usually contain cross-waiver of liability clauses by which each participant in the launch agrees to be responsible for it's own loss and to waive any claims which it may have against other participants. The crosswaiver of liability clause may apply to the participants in the launch who are parties to the launch services agreement, but not apply to their subcontractors. The role of insurance in responding to many risks has been critical in assisting commercial space ventures grow. Today traditional property and liability insurance, such as pre-launch, launch and in-orbit insurance and third party liability insurance, have become mandatory parts of most space projects. The manufacture and pre-launch insurance covers direct physical loss or damage to the satellite, its apogee kick moter and including its related launch equipment from commencement of loading operations at the manufacture's plant until lift off. The launch and early orbit insurance covers the satellite for physical loss or damage from attachment of risk through to commissioning and for some period of initial operation between 180 days and 12 months after launch. The in-orbit insurance covers physical loss of or damage to the satellite occuring during or caused by an event during the policy period. The third party liability insurance covers the satellite owner' s liability exposure at the launch site and liability arising out of the launch and operation in orbit. In conclusion, the liability in commercial space ventures extends to any organization which participates in providing products and services used in the venture. Accordingly, it is essential for any organization participating in commercial space ventures to contractually disclaim its liability to the extent permitted by law. To achieve the effective disclaimers, it is necessary to determine the applicable law and to understand the requirements of the law which will govern the terms of the contract. A great deal of funds have been used in R&D for commercial space ventures to increase reliability, safety and success. However, the historical reliability of launches and success for commercial space ventures have proved to be slightly lower than we would have wished for. Space insurance has played an important role in reducing the high risks present in commercial space ventures.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.74-95
• /
• 2009

Folk villages have higher historic and cultural values than other villages and contain considerably many traditional elements today. In Korea, there are seven folk villages that are under the protection of the Cultural Properties Protection Act. Unlike other kinds of tangible cultural assets individually appointed according to the act, those folk villages are protected by the act in entirety including the houses and auxiliary structures inhabited and used by the villagers. Since the act covers the entire villages, the residents are not allowed to repair or renovate their structures and accordingly suffer from huge limitations in everyday life with housing life under the biggest restrictions. Being appointed as a folk village is positive from the perspective of preserving the village. However, it is negative to the villagers because of the limitations to their housing lives. While common people lead a convenient life by the introduction of high technologies in modern society, they do not get to benefit from such technologies for the cause of preserving the traditional culture. Upon the appointment, they are subject to all sorts of building regulations and under huge direct and indirect influences of those regulations across many different aspects of life including housing life. Thus the residents of folk villages do have many complaints about the act. It is only natural that there occur conflicts between the state, which tries to preserve the traditional culture according to the act, and the residents, who pursue convenience in life. At the same time, it is natural too that the residents have the desire to pursue convenience in daily life. Thus they renovate their houses illegally. The government agencies are aware of that, however, it is not right for them to enforce the act and restrict their daily lives. Their tacit approval of such illegal renovations is the product of compromises between the residents' right to their private property and the state's policies of cultural asset protection. The residents try to renovate their houses within the limit that will not call for legal restrictions from the government agencies. The government allows for renovations as long as they are within the minimum limit. It is the result of efforts for the state and the residents to stitch up and compromise their own complaints.