• Journal of the Korean Regional Science Association
• /
• v.32 no.2
• /
• pp.3-13
• /
• 2016

This study is to analyze the feasibility of a project to digitalize the originals of cadastral maps of North Korea, a total of 299,688 sheets archived in South Korea's National Archives. The cost-benefit analysis is limited on the digitalization of the original cadastral maps of lands, woods and fields, information analysis on land attributes and platform construction, and the benefit analyses are divided into divided territory ones, namely intrinsic value, heritage value, direct and indirect utility value, military and strategic value and the foundation for inter-Korean unification, and post-unification ones such as the confirmation of ownerships, control of social conflicts, reconnection of family lines, arrangement of lot numbers, cadastral management and urban planning. Such benefits are estimated through the double-bound dichotomous choice of the contingent valuation method (CVM). The scenarios show that benefit in the divided territory is expected to reach 586.8billion won in the current value. The amount was calculated from the payable amount (7,925won) multiplied by the whole number of households. The post-unification benefit is estimated at 324.3billion to 594.1billion won as the payable amount (8,023won) is multiplied by the whole number of households.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.65-74
• /
• 2006

Modem drug discovery requires rapid pharmacokinetic evaluation of chemically diverse compounds for early candidate selection. This demands the development of analytical methods that offer high-throughput of samples. Naturally, liquid chromatography / tandem mass spectrometry (LC-MS/MS) is choice of the analytical method because of its superior sensitivity and selectivity. As a result of the short analysis time(typically 3-5min) by LC-MS/MS, sample preparation has become the rate- determining step in the whole analytical cycle. Consequently tremendous efforts are being made to speed up and automate this step. In a typical automated 96-well SPE(solid-phase extraction) procedure, plasma samples are transferred to the 96-well SPE plate, internal standard and aqueous buffer solutions are added and then vacuum is applied using the robotic liquid handling system. It takes only 20-90 min to process 96 samples by automated SPE and the analyst is physically occupied for only approximately 10 min. Recently, the ultra-high flow rate liquid chromatography (turbulent-flow chromatography)has sparked a huge interest for rapid and direct quantitation of drugs in plasma. There is no sample preparation except for sample aliquotting, internal standard addition and centrifugation. This type of analysis is achieved by using a small diameter column with a large particle size(30-5O ${\mu}$m) and a high flow rate, typically between 3-5 ml/min. Silica-based monolithic HPLC columns contain a novel chromatographic support in which the traditional particulate packing has been replaced with a single, continuous network (monolith) of pcrous silica. The main advantage of such a network is decreased backpressure due to macropores (2 ${\mu}$m) throughout the network. This allows high flow rates, and hence fast analyses that are unattainable with traditional particulate columns. The reduction of particle diameter in HPLC results in increased column efficiency. use of small particles (<2 urn), however, requires p.essu.es beyond the traditional 6,000 psi of conventional pumping devices. Instrumental development in recent years has resulted in pumping devices capable of handling the requirements of columns packed with small particles. The staggered parallel HPLC system consists of four fully independent binary HPLC pumps, a modified auto sampler, and a series of switching and selector valves all controlled by a single computer program. The system improves sample throughput without sacrificing chromatographic separation or data quality. Sample throughput can be increased nearly four-fold without requiring significant changes in current analytical procedures. The process of Bioanalytical Method Validation is required by the FDA to assess and verify the performance of a chronlatographic method prior to its application in sample analysis. The validation should address the selectivity, linearity, accuracy, precision and stability of the method. This presentation will provide all overview of the work required to accomplish a full validation and show how a chromatographic method is suitable for toxirokinetic sample analysis. A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method developed to quantitate drug levels in dog plasma will be used as an example of tile process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.96-97
• /
• 2012

In nitride and oxide film deposition, sputtered metals react with nitrogen or oxygen gas in a vacuum chamber to form metal nitride or oxide films on a substrate. The physical properties of sputtered films (metals, oxides, and nitrides) are strongly influenced by magnetron plasma density during the deposition process. Typical target power densities on the magnetron during the deposition process are ~ (5-30) W/cm2, which gives a relatively low plasma density. The main challenge in reactive sputtering is the ability to generate a stable, arc free discharge at high plasma densities. Arcs occur due to formation of an insulating layer on the target surface caused by the re-deposition effect. One current method of generating an arc free discharge is to use the commercially available Pinnacle Plus+ Pulsed DC plasma generator manufactured by Advanced Energy Inc. This plasma generator uses a positive voltage pulse between negative pulses to attract electrons and discharge the target surface, thus preventing arc formation. However, this method can only generate low density plasma and therefore cannot allow full control of film properties. Also, after long runs ~ (1-3) hours, depends on duty cycle the stability of the reactive process is reduced due to increased probability of arc formation. Between 1995 and 1999, a new way of magnetron sputtering called HIPIMS (highly ionized pulse impulse magnetron sputtering) was developed. The main idea of this approach is to apply short ${\sim}(50-100){\mu}s$ high power pulses with a target power densities during the pulse between ~ (1-3) kW/cm2. These high power pulses generate high-density magnetron plasma that can significantly improve and control film properties. From the beginning, HIPIMS method has been applied to reactive sputtering processes for deposition of conductive and nonconductive films. However, commercially available HIPIMS plasma generators have not been able to create a stable, arc-free discharge in most reactive magnetron sputtering processes. HIPIMS plasma generators have been successfully used in reactive sputtering of nitrides for hard coating applications and for Al2O3 films. But until now there has been no HIPIMS data presented on reactive sputtering in cluster tools for semiconductors and MEMs applications. In this presentation, a new method of generating an arc free discharge for reactive HIPIMS using the new Cyprium plasma generator from Zpulser LLC will be introduced. Data (or evidence) will be presented showing that arc formation in reactive HIPIMS can be controlled without applying a positive voltage pulse between high power pulses. Arc-free reactive HIPIMS processes for sputtering AlN, TiO2, TiN and Si3N4 on the Applied Materials ENDURA 200 mm cluster tool will be presented. A direct comparison of the properties of films sputtered with the Advanced Energy Pinnacle Plus + plasma generator and the Zpulser Cyprium plasma generator will be presented.

• Journal of Embryo Transfer
• /
• v.9 no.2
• /
• pp.145-152
• /
• 1994

The suitable electric stimulation is essential for activation and fusion of oocytes before or after nuclear transplantation The present study was undertaken to determine the optirnal condition for the parthenogenetic activation of in vitro rnatured(IVM) bovine oocytes by electric stimulation. Different direct current(DC) electric voltage of 1.0, 1.5 and 2.0 kV/cm and pulse duration of 30, 60 and 120 $\mu$sec were applied to the JVM nocytes in 0.3 M mannitol solution containing each 100 $\mu$M CaCl$_2$ and MgCl$_2$. IVM occytes at 24, 28 and 32 hours Post-maturation(hpm) were also electrically stimulated at 1.5 kV /cm, for 60 $\mu$ sec. The stimulated nocytes were then co-cultured in TCM-199 solution containing 10% fetal calf serum with bovine oviductal epithelial cells for 7~9 days in a 5% $CO_2$ incubator at 39$^{\circ}C$ ~ Their activation and in vitro development to morula and blastocyst were assessed under an inverted microscope. The higher activation rates 62.8 and 63.4% and in vitro de- velopment rates to morula and blastocyst 5.1 and 10.9% were shown in the oocytes stimulated at the voltage of 1.0 and 1.5 kV/cm than 2.0 kV/cm, respectively. No signifi- cantly(P<0.05) different activation rate was shown in JVM oocytes stimulated for 30, 60 and 120 $\mu$sec, but developmental rates to morula and blastocyst was significantly(P<0.05) higher in the oocytes stimulated for 30 $\mu$sec(6~3%) and 60 $\mu$sec(10~0%) than 120 $\mu$sec(0~ 0%). The aged oocytes at 28 and 30 hpm showed significantly(P<0.05) higher activation rates(72~7 and 79.7%) than the oocytes at 24 hpm(50~9%)~ Also, their developmental rates to morula and blastocyst were significantly(P<0.05) higher in the nocytes at 28(14.3%) and 32 hpm(15.9%) than 24 hpm(3.6%). From these results, it can be suggested that the optimal electric stimulation for IVM bovine occytes is a DC voltage between 1.0 and 1.5 kV/cm, pulse duration of 30 or 60 $\mu$sec, and the optimal age of IVM oocytes for electric activation is at 32 hpm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.370-378
• /
• 2012

This study is to find out the distribution characteristic of Octopus minor in the Tando Bay on the southwest coast of Korea with conducting surveys from May of 2006 to April of 2007. Surveys were carried out at 20 stations on 2 and 3 tide time in the low speed of high tide at night and conducted during 30minutes (4 times fishing) per station. Catch per unit effort (CPUE) was estimated by total catch per 500hooks at each station. Monthly CPUE showed that they put highest in October, November, April and June at 10.4, 10.5, 9.4 and 7.7 individuals respectively. On the other hand, CPUE put lowest in January, the coldest month, and August, the hottest month, at 0.2 and 0.3 individuals respectively. As for geographical mantle length distribution, average mantle length ranged from 6.2cm to 7.3cm at stations near the tidal channels (St. 1, 4, 5, 6, 8, 9, 10, 13, 14, 15, 18, 19 and 20), and was smaller than 6.0cm at stations located inside of bay (St. 2, 3, 7, 11, 12 and 17). In terms of geographical distribution density, CPUE showed higher than 8.0 at St.4 in Changmaeri, St.8 in Taecheonri, St.13 near Seondo, St.18 in Naeri and St.14 in western part of Tando which are located near the main tidal channels. And distribution density showed low that CPUE was lower than 5.0 individuals at stations located inside of bay (St. 1, 3, 5, 6, 7, 11, 12, 16 and 20). Through the results, the difference of distribution density reflects that distribution of Octopus minor is affected by direction of current and inflow of pollutant from land in direct. Therefore, it is considered that bottom composition of tidal flat and distribution of live food are the crucial cause of identifying the distribution characteristics of Octopus minor. For this reason, it is judged to need additional research on it.

• Journal of Environmental Impact Assessment
• /
• v.23 no.4
• /
• pp.271-284
• /
• 2014

The objectives of this research were to analyse the microhabitat of Cobitis choii which is designated as an endangered fish species (I) and national monument species in Korea (No. 454), and provide valuable information of suitable replacement habitat in the future for a conservation of the population with rapid decreases by environmental pollution. Sampling and microhabitat analysis in three streams such as Baekgok, Yugu and Gap Stream, known as one of the least habitats in Korea showed that the mean number of Cobitis choii observed was 2.6. This result indicated that the richness was too low, so the species conservation was very urgent. Optimal physical microhabitat of the population was determined as environmental conditions with > 60% sand with 1 mm particle size, optimal water depth of 20 - 60 cm in the habitats, and the optimal current velocity of < 0.4 m/s. Under the circumstances of the microhabitat, optimal water volume (discharge) was 0 - 2 m3/s in the each sectional analysis and this reach was mainly composed of the stream section with intermittant slow runs and pools. These microhabitats were largely disturbed by physical modifications of habitat and chemical pollutions due to direct influences of nutrient-rich water inputs from the urban area and intensive agricultural pollutants. For these reasons, optimal habitat replacement are required in the future for the conservation of the species.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.2
• /
• pp.51-60
• /
• 2003

Rice, which occupies about 60% of the farmland in Korea, is a staple crop in Asia. It not only absorbs $CO_2$ from the atmosphere, but also emits carbon in a form of CH$_4$. It has a potential role in the global budget of greenhouse gases because of its relative contributions of carbon absorption and emission associated with changing hydrologic cycle. To better understand its current and future role, seasonal variations of energy and $CO_2$ exchange in this critical ecosystem need to be quantified. The purpose of this study was to measure, document and understand the exchange of energy and $CO_2$ in a typical rice paddy in Korea throughout the whole growing season. Since late April of 2002, we have conducted measurements of energy and $CO_2$ exchange in a rural rice paddy at Hari site, one of the Korea regional network of tower flux measurement (KoFlux). After the quality control and gap-filling, the observed fluxes were analyzed in the context of micrometeorology and biophysics. $CO_2$ and energy exchanges varied significantly with land cover changes (e.g., plant growth stages), in addition to changes in weather and climate conditions. This study, reporting first direct measurement of energy and $CO_2$ exchange over a rice paddy in Korea, would serve as a useful database as one of the reference sites in AsiaFlux and FLUXNET.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.261-272
• /
• 2012

This study was conducted so as to examine which change tDCS (Transcranial Direct Current Stimulation) for improving working memory can make on the EEC of stroke patients. Among the patients who suffered for more than 6 months by hemiparalysis caused by stroke, 20 patients selected by MMSE and DST were randomly divided into I group (10 patients) fulfilled by only CCT and II group (10 patients) fulfilled by both tDCS and CCT for total 4 weeks, 30 minutes per a day, three times per a week. For examining EEC variation, the absolute spectrum power was calculated by three bands (${\theta}$; 4~8 Hz, lower ${\alpha}$; 8~10.5 Hz, upper ${\alpha}$;10.5~13 Hz) during the task of words, photos and mental calculation with EEC test, before the arbitration, after 2 weeks and after 4 weeks, so the rate of increase and decrease (%) for the reference EEC was obtained. As the results, the first, particular aspects different one another in three bands were detected according to the measuring period and task. The second, in the forth week, there was only a significant difference in lower ${\alpha}$-power of all tasks. Therefore, through the procedure measuring EEC of this study, the degree of working memory's damage can be expressed by numerical value and tDCS should be additionally helpful for brain damaged patients' perception rehabilitation.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.118-124
• /
• 2005

In this study, a novel deposition method of Pt catalysts onto Nafion membranes modified with polypyrrole (PPy) has been proposed for PEMFC application. The PPy/Nafion composite membranes were fabricated by chemical polymerization of pyrrole using $FeCl_3$ and $Na_2S_2O_8$ as initiator. The proton conductivity and water uptake of the chemically prepared PPy/Nafion composites were investigated. The ionic conductivity and water uptake of PPy/Nafion composite membrane prepared with $Na_2S_2O_8$ were decreased with polymerization time of pyrrole. In the case of $FeCl_3$, the ionic conductivity was almost retained and the water uptake was decreased with polymerization time of pyrrole. When the Pt particle was deposited on PPy/Nafion composites membrane by chemical reduction of $H_2PtCl_6$, the Pt loading on Nafion membrane was enhanced by polypyrrole due to electronic conduction property. The performance evaluation with membrane electrode assembly composed of Pt/PPy/Nafion composite and diffusion electrode was carried out using a single cell. As a result of fuel cell test, current density of $569mA/cm^2$ at 0.3 V has been obtained for MEA contained with Pt/PPy/Nafion composite. This study shows that direct deposition of Pt catalysts on Nafion impregnated polypyrrole is a promising method to prepare thin catalyst layer for the PEMFC.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.193-209
• /
• 2016

The Mekong River is a river in the south-eastern part of the continent of Aisa. It flows through the countries of Thailand, Lao PDR, Cambodia, Myanmar, and Vietnam that are located in Indochina and are members of ASEAN. These countries are growing rapidly and many others have entered into these markets. As the number of manufactures has increased, logistics markets become very attractive to our logistics companies that want to expand their business. This study focuses on four countries, Lao PDR, Cambodia, Myanmar, and Vietnam, which have potential economic growth and shows the environment of logistics with current logistics infrastructure and related investment law and system. The goal of this study to provide, with strength, weakness, opportunities, and threats(SWOT) analysis, some strategies to enter 4 countries' logistics market with SWOT and the strategies are as follows; First, foreign direct investment in logistics is linked with logistics infrastructure projects. Our government should strengthen its role to find cooperation programs that make connect with logistics business. Second, a logistics company is better off in a consortium with other manufacturers or other logistics companies to ensure minimum cargo and reduce entry risks. Finally, the four countries' roles as a logistics bases need to divided according to their environments, to benefits of logistics connecting between India and China.