• 연구논문집
• /
• 통권29호
• /
• pp.29-38
• /
• 1999

In comparison with gasoline engine, LPG direct injection engine has some advantages not only in emission and fuel efficiency but also in prevention of power decrease and back fire etc. which are disadvantages of conventional LPG engine. In this study, comparision tests of the incylinder spray and combustion characteristics between of LPG and gasoline fuels were performed in the RCEM as a basic research for the development of future LPG engine with low emission and high fuel efficiency During the direct injection of LPG fuel and gasoline into the inside of RCEM, spray development characteristics according to the injection condition have been photographed by the high speed shadow graph methods. The conditions for the optimum mixture distribution of LPG and gasoline fuels are achievable at the selected ignition timing, respectively.

• 한국재료학회지
• /
• 제16권2호
• /
• pp.85-91
• /
• 2006

The fraction of $\varepsilon\;and\;\gamma$'-iron nitride in compound layer is predicted by x-ray diffraction using direct comparison method. The validity of formulation models was checked by comparing calculated results with metallographic analysis of iron nitride compound layer grown on steel S45C by gas nitriding. The fraction of $\varepsilon$ calculated by the three phase model, porous-$Fe_3N$/ dense-$Fe_3N$/ mixed layer with $Fe_3N\;and\;Fe_4N$, is 80 percent of that analyzed by etching technique. The $\varepsilon$ fraction predicted by mixed layer model is 122 percent of that measured by microscope.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.445-450
• /
• 2009

Fingerprint recognition using a joint transform correlator (JTC) is the most well-known technology among optical fingerprint recognition methods. The JTC method optically compares the reference fingerprint image with the sample fingerprint image then examines match or non-match by acquiring a correlation peak. In contrast to the JTC method, this paper presents a new method to examine fingerprint recognition by producing a computer generated hologram (CGH) of those two fingerprint images and directly comparing them. As a result, we present some parameters to show that fingerprint recognition capability of the CGH direct comparison method is superior to that of the JTC method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.187-190
• /
• 2007

The objective of this paper is to investigate into the development of injection mould with high cooling characteristics using a direct metal RP technology. In order to manufacture the injection mould with a high cooling rate, three-dimensional conformal cooling channels have been generated in the mould. DMT process, which is one of direct metal RP technologies, has been utilized to directly manufacture the metallic mould with three-dimensional conformal cooling channels. In order to examine the performance of the designed mould, injection molding tests have been carried out. The results of the experiments have been shown that a cooling time and the injection time of the proposed mould are reduced by the factor of five and two times in comparison with the injection mould with linear cooling channels.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.370-376
• /
• 2009

The influence of magnetic saturation on electromagnetic field distribution in both a permanent-magnet direct-current (PMDC) motor and a field-winding (wound-field) direct-current (FWDC) motor, with the same output mechanical power, has been studied. In this paper, an approximate analytical method and time-stepping Finite Element Method (FEM) are used for prediction of Back-EMF and electromagnetic torque. No-load and rotor-lucked conditions, according to experimental measurements, and the FEM and analytical method studies of the motors have been considered. A sensitivity analysis has also been successfully accomplished on the major design parameters that affect motor performance. At last, these two DC motors are compared, in spite of their differences, on the basis of measured output characteristics.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1451-1460
• /
• 2004

A two-stroke Schnurle-type gasoline engine was modified to enable compression-ignition in both the port fuel injection and the in-cylinder direct injection. Using the engine, examinations of compression-ignition operation and engine performance tests were carried out. The amount of the residual gas and the in-cylinder mixture conditions were controlled by varying the valve angle rate of the exhaust valve (VAR) and the injection timing for direct injection conditions. It was found that the direct injection system is superior to the port injection system in terms of exhaust gas emissions and thermal efficiency, and that almost the same operational region of compression-ignition at medium speeds and loads was attained. Some interesting combustion characteristics, such as a shorter combustion period in higher engine speed conditions, and factors for the onset of compression-ignition were also examined.

• Communications for Statistical Applications and Methods
• /
• 제13권3호
• /
• pp.669-683
• /
• 2006

Model-based methods are generally used for small area estimation. Recently Shin and Lee (2003) suggested a method which used spatial correlations between areas for data set including some auxiliary variables. However in case of absence of auxiliary variables, Direct estimator is used. Even though direct estimator is unbiased, the large variance of the estimator restricts the use for small area estimation. In this paper, we suggest new estimators which take into account spatial correlation when auxiliary variables are not available. We compared Direct estimator and the newly suggested estimators using MSE, MAE and MB.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.54-66
• /
• 2002

A grid-based hydrological model, CELTHYM, capable of estimating base flow and surface runoff using only readily available data, was used to assess hydrologic impacts caused by land use change on Little Eagle Creek (LEC) in Central Indiana. Using time periods when land use data are available, the model was calibrated with two years of observed stream flow data, 1983-1984, and verified by comparison of model predictions with observed stream flow data for 1972-1974 and 1990-1992. Stream flow data were separated into direct runoff and base flow using HYSEP (USGS) to estimate the impacts of urbanization on each hydrologic component. Analysis of the ratio between direct runoff and total runoff from simulation results, and the change in these ratios with land use change, shows that the ratio of direct runoff increases proportionally with increasing urban area. The ratio of direct runoff also varies with annual rainfall, with dry year ratios larger than those for wet years shows that urbanization might be more harmful during dry years than abundant rainfall years in terms of water yield and water quality management.

• Journal of Plant Biology
• /
• 제13권1호
• /
• pp.1-12
• /
• 1970

The Nongkwang variety was sown directly in the field by the three methods of dibbling, drill seeding and broad-casting in non-, low- and high-salty areas, and compared with the growth of transplanted rice in each areas. The yield of rough rice was increased remarkably by direct sowing when compared with that produced by transplanting inboth salty areas, but in non-salty area, the former was decreased significantly. There was no significant difference in the yields of rough rice resulting from three seedling methods of direct sowing in each area. The direct sowing method was predominated in number of panicle, weight of panicle, ratio of matured grains, milling recovery percentage, and straw weight in both salty areas, and dicreased in panicle weight and ratio of matured grain in nonsalty area.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.42-47
• /
• 2003

The laser direct writing method has some advantages of being maskless, allowing rapid and inexpensive prototyping in comparison to conventional mask-based photolithography. In general, there are two kinds of laser direct writing methods such as the laser ablation method and the laser polymerization method. The laser polymerization method was studied fur manufacturing waveguide in this paper. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, focusing height and optical properties of polymer. Experimentally, the optical waveguide was manufactured trapezoid shape. Through SEM the waveguide was 20 ${\mu}{\textrm}{m}$ width and 7.4 ${\mu}{\textrm}{m}$ height.