탄소나노소재의 화학적 기능화는 대부분 복합체 제조 시 고분자 모재(matrix)와의 계면 특성 향상을 위한 방법으로 적용되어 왔다. 계면결합력의 증가에 따른 효과는 기계적 물성의 증가를 통해 간접적으로 확인할 수 있으며, 이는 계면에서 효과적인 응력전달을 통해 설명된다. 보다 직접적으로 기능화를 통한 계면결합력 증가의 효과를 설명하기 위하여 피에조 저항효과를 관찰할 수 있으며, 이를 통하여 변형에 대한 복합체 내부의 전도성 충진재의 거동을 짐작해 볼 수 있다. 이를 위해 다중벽 탄소나노튜브(MWCNT)와 환원 그래핀(rGO)을 황산/질산 용액을 이용하여 산화반응을 통해 기능기를 도입하였으며, 기능화 전 후의 복합체의 전기적 저항 및 피에조 저항효과를 측정하였다. 결과로부터 기능기 도입으로 인해 증가한 탄소나노소재의 구조적 결함이 전기적 저항의 증가를 야기하지만 동일한 변형에 대하여 저항 변화가 더 크게 나타나 변형에 따른 복합체 내부 전도성 입자의 유동성이 증가함을 확인하였고, 이를 통해 계면결합력이 증가함을 피에조 저항효과 관찰을 통해 확인할 수 있었다.
노후 된 도로 포장 개량을 위한 아스팔트 덧씌우기 포장의 경우 반사균열로 인한 조기파손이 문제가 되고 있어, 반사균열을 억제하고 포장의 내구성을 확보할 수 있는 새로운 공법이 필요한 실정이다. 에폭시 아스팔트 바인더를 이용한 응력흡수층(SAMI)을 통해 아스팔트 덧씌우기 포장의 내구성을 확보하고자 하였다. 에폭시 응력흡수층의 인장성능, 접착성능, 방수성능, 내화학성, 내구성 실험을 수행하였으며, 교면 방수재료의 품질기준을 만족하는 것으로 나타났다. 반사균열 억제 효과를 검토하기 위해 반복직접인장실험 결과 에폭시 응력흡수층 적용시 단면 두께가 감소하여도 두께 10cm의 PSMA 아스팔트 콘크리트에 비해 1.2~1.56배 높은 반사균열저항성을 나타내었다. 4점 빔피로 실험 결과 에폭시 응력흡수층을 적용하면 피로파괴횟수가 약 7.5배 높아져 포장의 내구성을 향상시킬 수 있었다. 에폭시 응력흡수층은 반사균열 억제와 피로수명 향상 및 방수층으로서의 역할을 수행하여 아스팔트 덧씌우기 포장의 내구성 향상에 효과가 있는 것으로 나타났다.
IT서비스는 지식서비스의 일종으로서 다른 분야의 전문가들이 모여서 함께 프로젝트를 수행하는 관계로, 제대로 된 성과를 내기 위해서는 구성원들간의 신뢰의 형성이 중요하다. 본 연구에서는 기존 IT서비스 연구들에서 다루었던 신뢰의 내부구조를 좀 더 세분화하여 인지적 신뢰와 정서적 신뢰로 구분하여 프로젝트 성과에 미치는 영향을 살펴보았다. 인지적 신뢰에 영향을 미치는 선행요인으로는 기술과 업무전문성을, 정서적 신뢰에 영향을 미치는 선행요인으로서는 사회적 유대감과 관계갈등을 선정하였다. 팀워크에서 중요한 커뮤니케이션으로는 두 가지 신뢰에 다 영향을 미치는 것으로 가설을 설정하였다. 연구모델의 실증을 위하여 IT프로젝트팀 리더를 대상으로 설문지법으로 자료를 수집하였고, 수집된 자료는 Smart PLS를 사용하여 분석하였다. 분석결과 인지적 신뢰에 영향을 주는 요인으로 업무전문성이 기술전문성에 비해서 상대적으로 큰 영향력을 미쳤고, 갈등은 정서적 신뢰에 부정적인 영향을 미치는 것으로 나타났다. 커뮤니케이션은 인지적 신뢰와 정서적 신뢰에 각각 긍정적 영향을 미치고 있었으며, 더불어 인지적 신뢰가 정서적 신뢰형성의 선행요인으로 확인되었다. IT프로젝트 성과에는 인지적 신뢰뿐만 아니라 정서적 신뢰도 양(+)의 영향을 미치고 있으므로 성공적인 프로젝트를 위해서는 정서적 신뢰도 간과해서는 안 될 것이다. IT프로젝트의 성공요인으로의 인지적 신뢰와 정서적 신뢰가 각각 하나의 영향력을 가진 요인임을 알아냄으로서 향후 기업에서는 IT프로젝트 구성원들간의 신뢰형성에 노력을 기울이되 인지적 신뢰가 정서적 신뢰의 매개요인임을 고려하여 구체적인 커뮤니케이션을 진행하는 것이 바람직할 것이다.
본 연구는 일반 콘크리트와 SBR 라텍스 개질 콘크리트의 부착강도 특성을 분석하고자 신 구 콘크리트로 구성된 직접인장 시험체를 제작하여 부착강도를 측정하였다. 이때, 시험체와 측정기의 연결장치가 $360^{\circ}$ 회전이 가능하도록 시험장비를 개선하여 시험체의 편심이 부착강도 측정에 미치는 영향을 최소화였다. 주요 실험변수로는 라텍스 혼입율, 표면 처리상태, 표면 함수상태로 정하였으며 실험결과는 다음과 같다; 라텍스 혼입률이 증가함에 따라 부착강도도 증가하였으며, 혼입률 15%에서 37%의 증진을 보였다. 이것은 라텍스가 골재와 시멘트 페이스트 사이에 충전되어 필름 막을 형성하고 부착력을 증진시켰기 때문인 것으로 판단된다. 표면처리에 따라 부착강도의 변화를 고찰한 결과, 샌드 그라인딩과 와이어 부러쉬에 의해 표면처리를 하였을 경우 부착강도는 단순 절단한 경우보다 약 49% 증가하였다. 표면함수 상태에 따른 영향을 고찰한 결과, 부착강도는 기존 콘크리트 표면이 건조하였을 경우에 가장 작게 나타났고, 자유수가 표면에 있을 때가 그 다음을 나타냈으며, 표면건조포화상태에선 37% 증가하여 가장 크게 나타났다. 따라서 부착강도를 증진시키기 위해서는 적절한 표면처리와 표면함수상태의 유지가 필수적임을 알 수 있었다.
구치부 매복은 1% 이내로 드문 편이지만 저위 교합, 반대 악궁 치아의 정출, 인접치 경사로 인한 공간 부족 등의 문제가 발생하게 된다. 구치부 치아는 교합 및 악골 발육에 관여하는 기능적으로 중요한 치아이므로 초기 혼합 치열기부터 지속적인 방사선 사진을 찍어 매복 여부를 관찰해야 한다. 매복의 원인에는 치근 발육의 저하, 과잉치, 낭종, 치아종, 유착 등이 있다. 첫 번째 증례에서는 초진 시 치근 발육이 1/2이하라서 자발적 맹출을 기대하였지만 2/3이상 발육 시에도 맹출 하지 못하여 외과적 노출 및 교정적 견인을 시함하였다. 두 번째 증례는 낭종을 포함하는 매복 구치를 주소로 내원하였고 낭종 크기가 작고 인접 부위에 주요한 해부학적 구조물이 없어 완전한 적출술을 시행 후 교정적 견인을 하였다. 교정적 견인 시 해당 치아에 직접 어태치먼트(attachment)를 붙인 후 악하고 지속적인 힘을 적용하는 것이 유착, 외흡수, 치주 부착 소실 등의 부작용이 나타나지 않는다. 또한 고정식 장치를 사용하면 환자의 협조도가 필요 없고 맹출 공간을 확보하면서 호선상에 매복치를 견인 할 수 있다. 본 증례에서는 매복 구치를 외과적 노출 및 교정적 견인을 통해 교합상으로 배열을 하여 양호한 결과를 얻었기에 보고하는 바이다.
The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.
For the design of real applicable molecular devices, current-voltage properties through molecular nanostructures such as metal-molecule-metal junctions (molecular junctions) have been studied extensively. In thiolate monolayers on the gold electrode, the chemical bonding of sulfur to gold and the van der Waals interactions between the alkyl chains of neighboring molecules are important factors in the formation of well-defined monolayers and in the control of the electron transport rate. Charge transport through the molecular junctions depends significantly on the energy levels of molecules relative to the Fermi levels of the contacts and the electronic structure of the molecule. It is important to understand the interfacial electron transport in accordance with the increased film thickness of alkyl chains that are known as an insulating layer, but are required for molecular device fabrication. Thiol-tethered RuII terpyridine complexes were synthesized for a voltage-driven molecular switch and used to understand the switch-on mechanism of the molecular switches of single metal complexes in the solid-state molecular junction in a vacuum. Electrochemical voltammetry and current-voltage (I-V) characteristics are measured to elucidate electron transport processes in the bistable conducting states of single molecular junctions of a molecular switch, Ru(II) terpyridine complexes. (1) On the basis of the Ru-centered electrochemical reaction data, the electron transport rate increases in the mixed self-assembled monolayer (SAM) of Ru(II) terpyridine complexes, indicating strong electronic coupling between the redox center and the substrate, along the molecules. (2) In a low-conducting state before switch-on, I-V characteristics are fitted to a direct tunneling model, and the estimated tunneling decay constant across the Ru(II) terpyridine complex is found to be smaller than that of alkanethiol. (3) The threshold voltages for the switch-on from low- to high-conducting states are identical, corresponding to the electron affinity of the molecules. (4) A high-conducting state after switch-on remains in the reverse voltage sweep, and a linear relationship of the current to the voltage is obtained. These results reveal electron transport paths via the redox centers of the Ru(II) terpyridine complexes, a molecular switch.
Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2 of intercuspal distance) were varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as follows : 1. Displacement of buccal cusp in R model occurred and increased as widening of the cavity, and displacement in B model was little and not influenced by cavity width. 2. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 3. With the increase of the isthmus width, B model showed no change in the stress and strain. In R model, the stress and strain increased both in the area of buccal-pulpal line angle and the buccal side of marginal ridge, therefore the possibility of crack increased. 4. The stress and strain were distributed evenly on the tooth in B model, but in R model, were concentrated on the buccal side of the distal marginal ridge and buccal-pulpal line angle, therefore the possibility of fracture increased.
본 연구는 치면열구전색술시 치과용 염료를 이용하여 초기 우식병소의 유무와 유기물의 잔재를 확인하고 산부식 액의 도포시 brushing방법을 이용하여 침투를 깊이 유도함으로써 열구내 법랑질의 산부식 상태를 유지력을 얻기 위한 최상의 상태로 만들고자 하는 목적으로 자연치를 대상으로 여러 가지 치면세마법과 비교하여 다음과 같은 결과를 얻었다. 1. 실험군은 기존의 치면세마법보다 변연누출이 적었으나 enameloplasty를 시행한 군과는 차이가 없었다. 2. 법랑질 산부식 형태의 질이 향상되었다. 3. 실험군은 다른 군에 비해 미세결합강도가 높았다. 4. 구강내 환경적 조건이 치면열구전색재의 성공실패를 좌우한다. 이상의 결과를 종합하면 치면열구전색술시 치과용 염료와 산부식 액의 도포시 brushing 방법을 이용하여 침투를 깊이 유도하므로써 수복물의 성공적인 도포를 제공할 수 있다고 사료된다.
The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on the maxillary left first molar and then filled with composite resin. Three dimentional model with 3049 nodes and 2450 8-node blick elements was made by the serial photographic method and isthmus (1/4, 1/3, 1/2 and 2/3 of intercusplal distance between mesiobuccal cusp tip and mesiolingual cusp tip) was varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 1500N was applied vertically on the node from the lingual slope of the mesiobuccal cusp. The results were as follows : 1. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 2. When it comes to stress distribution, the stress was concentrated in the facio-gingival line angle and the buccal side of the distal margin of the cavity in both Band R model. 3. With the increase of the isthmus width, the stress decreased in the area of the facio-gingival line angle, and increased in the area of facio-gingival line angle as well as the buccal side of the distal margin of the cavity in B model. In R model, the stress increased both in the area of facio-gingival line angle and the buccal side of the distal margin of the cavity, therefore the possibility of crack increased. 4. As the width of cavity increased, in B model, the direction of crack moved from horizontal to vertical on the facio-gingival line angle and the facio-pulpal line angle. In R model, the direction of the crack was horizontal on the facio-gingival line angle and moved from horizontal to the $45^{\circ}$ direction on the facio-pulpal line angle.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.