• 제목/요약/키워드: direct attack

검색결과 135건 처리시간 0.022초

펜싱 플러레 공격 기술중 마르쉬 팡트 동작의 운동학적 분석 (Kinematic Analysis of Marche Fente Motion in a Fleuret Attack Technique)

  • 안상용
    • 한국운동역학회지
    • /
    • 제13권3호
    • /
    • pp.277-291
    • /
    • 2003
  • This study was designed to examine the kinematic factors in the phase during the marche fente motion. For this study, the subjects were 5 elite male fencing players. The direct linear transformation (DLT) method was used in calculating 3-D coordinate of the digitized body parts. The cubic spline function was used for smoothing and the kinematic data for displacement, velocity, angle variables were calculated for Kwon3d ver 2.1. And the following conclusions were drawn; 1. It show that the marche phase appeared to longer time than the pante phase In the performance time. For the fast attack, it showed that the subjects should be moving in a short stride width. 2. For a fast and stable movement posture in the marche phase, the vertical change of COG must be maintain the same position as possible, but all subjects appeared to decrease the COG because of a excessive the knee flection. 3. In the COG velocity change, all the subjects showed to the same change in both the marche and the fente phase. However in the attack extremity velocity, it increased velocity in order of upper arm, fore arm, and hand in the marche phase, but it showed different velocity among each subjects at the moment of stabbing. So that in order to do effective stabbing, they have to extend their upper extremity max and do faster the distal segment than the proximal segment. 4. It showed to take a fast and stable movement, because some subjects showed the big anteroposterior angle of the trunk flexed max shoulder angle and elbow angle of their attack arm and the other upper extremity.

M2M 통신 환경에서 트랩도어 충돌 해쉬를 이용한 그룹키 생성 및 교환 기법 (Group Key Generation and Exchange Scheme using a Trapdoor Collision Hash in M2M Communications Environment)

  • 김성수;전문석;최도현
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권5호
    • /
    • pp.9-17
    • /
    • 2015
  • 무선 통신 기술의 발전과 ICT 시장의 변화에 따라 M2M 서비스 활성화 및 기술은 지속적인 발전을 거듭하고 있다. 사람의 제어나 직접적인 개입 없이 사물과 사물간의 통신환경을 구축하는 M2M 환경이 주목받고 있다. 무선 통신 환경의 특성으로 데이터 노출, 위조, 변조, 삭제, 프라이버시 등의 문제에서 다양한 보안 위협에 노출 될 가능성과 안전한 통신 보안 기술이 중요 요구사항으로 이슈화되고 있다. 본 논문은 트랩도어 충돌 해쉬의 요구사항을 분석하고, 트랩도어의 특수성을 이용하여 M2M 환경에서 그룹간의 키를 생성하고, 이를 세션키로 교환하는 기법을 제안한다. 그리고 그룹키 생성에 이은 디바이스와 게이트웨이의 인증을 확인하는 기법을 제안한다. 제안하는 기법은 충돌 메시지와 충돌 해쉬의 특수성을 이용하여 그룹 통신 구간의 위장 공격, 중간자 공격, 재전송 공격 등의 공격 저항성을 가지는 안전한 기법임을 확인하였다.

어깨너머공격 모델링 및 보안 키패드 취약점 분석 (Shoulder Surfing Attack Modeling and Security Analysis on Commercial Keypad Schemes)

  • 김성환;박민수;김승주
    • 정보보호학회논문지
    • /
    • 제24권6호
    • /
    • pp.1159-1174
    • /
    • 2014
  • 스마트폰, 태블릿 PC와 같은 스마트 기기들의 사용이 증가하면서 애플리케이션을 이용한 금융 업무 등 중요 업무를 해당 스마트 기기를 이용하여 처리하는 경우가 많아지고 있으며, 이러한 정보를 획득 할 수 있는 여러 공격들이 존재하고 있다. 그 중 사회공학기법인 어깨너머공격은 해킹 기술과 같은 특정 컴퓨터 기술 없이도 직접적으로 정보를 획득할 수 있어 강력한 공격 방법으로 꼽힐 수 있다. 그러나 지금까지의 어깨너머공격은 사용자 모르게 정보를 엿보는 행위라는 단순한 정의밖에 존재하지 않았다. 또한, 국제표준인 공통평가기준(CC)의 공통평가방법론(CEM)에서 제공하는 attack potential 방법론은 어깨너머공격에 대한 내성을 정량적으로 나타내지 못하는 한계를 가지고 있다. 이에 본 연구에서는 어깨너머공격에 필요한 공격조건들을 나열하고 공통평가기준에서 제공하는 공격 성공 가능성(attack potential)의 방법론을 차용하여 어깨너머공격까지 공격 성공 가능성을 계산할 수 있도록 이를 포함할 수 있는 공격성공 가능성을 제안한다. 더불어, 현재 스마트 기기들에 제공되고 있는 모바일뱅킹 애플리케이션의 보안 키패드인 쿼티키패드와 숫자 키패드의 안전성을 분석하고 공격 시나리오를 기반으로 하여 현재 제공되고 있는 모바일뱅킹 애플리케이션들의 어깨너머공격에 대한 공격 성공 가능성을 알아본다.

MSAP을 이용한 F/A-18C로 부터 JDAM 분리 해석 (Application of MSAP to JDAM Separation from an F/A-18C Aircraft)

  • 이승수
    • 한국전산유체공학회지
    • /
    • 제9권1호
    • /
    • pp.41-47
    • /
    • 2004
  • A successful store separation analysis tool, MSAP(Multi-body Separation Analysis Program) has been applied to F/A-18C/JDAM CFD Challenge Ⅱ. The challenge was devised to challenge CFD community to use CFD methodologies to predict and match the trajectory of a JDAM MK-84 separating from F/A-l8C. Trajectory simulations for two flight conditions were performed. Comparison between computed and measured flight trajectories for both conditions shows a good agreement.

MSAP을 이용한 F/A-l8C로부터 JDAM 분리 해석 (Application of MSAP to JDAM Separation from an F/A-l8C Aircraft)

  • 이승수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2003년도 추계 학술대회논문집
    • /
    • pp.89-94
    • /
    • 2003
  • A successful store separation analysis tool, MSAP(Multi-body Separation Analysis Program) has been applied to F/A-18C/JDAM CFD Challenge II. The challenge was devised to challenge CFD community to use CFD methodologies to predict and match the trajectory of a JDAM MK-84 separating from F/A-l8C. Trajectory simulations for two flight conditions were performed. Comparison between computed and measured flight trajectories for both conditions shows a good agreement.

  • PDF

Interaction of pharmaceuticals with betacyclodextrin III Influence of Betacyclodextrin on Phenobarbital Hydrolysis

  • Min, Shin-Hong
    • 약학회지
    • /
    • 제16권4호
    • /
    • pp.155-161
    • /
    • 1972
  • The hydrolysis of phenobarbital is decelerated in alkaline solution by betacyclodextrin. The betacyclodextrin inhibits the degradation of phenobarbital up to 1.5 fold in the system containing 1% betacyclodextrin. The degradation mechanism in systems containing betacyclodextrin is the same that in system without complexing agent, although the rate constants are different. The pH dependence of the hydrolysis rate deceleration is compared with the ionization percent of betacyclodextrin. The results indicate that a direct relationship does not exist between the ionization of betacyclodextrin. It seems reasonable therefore that the phenobarbital undergoes a stable complex with betacyclodextrin and complex formation would provide a better shield for the phenobarbital from hydroxyl ion attack.

  • PDF

디지털 고주파 기억 장치에서의 스퓨리어스 신호 저감 방법 (A Method for Reduction of Spurious Signal in Digital RF Memory)

  • 강종진
    • 한국전자파학회논문지
    • /
    • 제22권7호
    • /
    • pp.669-674
    • /
    • 2011
  • 본 논문에서는 디지털 고주파 기억 장치(DRFM: Digital RF Memory)의 스퓨리어스 신호 저감 방법에 대하여 제안하였다. 스퓨리어스 특성은 디지털 고주파 기억 장치의 성능을 결정짓는 주요 요소이다. 제안한 방법은 입력되는 IF 신호에 랜덤 위상값을 가지는 LO 신호를 혼합하여 샘플링하여 스퓨리어스 신호를 저감하였으며, 랜덤 위상을 가지는 LO 신호는 직접 디지털 합성기(DDS: Direct Digital Synthesizer)의 고속 위상 제어 특성을 이용하여 생성하였다. 제안한 방법을 적용하여 5~10 dB의 스퓨리어스 특성이 향상됨을 확인하였다.

결정의존성 식각/기판접합을 이용한 MEMS용 구조물의 제작 (Si Micromachining for MEMS-lR Sensor Application)

  • 박흥우;주병권;박윤권;박정호;김철주;염상섭;서상의;오명환
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1998년도 춘계학술대회 논문집
    • /
    • pp.411-414
    • /
    • 1998
  • In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PT layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PT layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PT layer of c-axial orientation rained thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PT layer were measured, too.

  • PDF

결정의존성 식각/기판접합을 이용한 MEMS용 구조물의 제작 (Si Micromachining for MEMS-IR Sensor Application)

  • 박홍우;주병권;박윤권;박정호;김철주;염상섭;서상회;오명환
    • 한국전기전자재료학회논문지
    • /
    • 제11권10호
    • /
    • pp.815-819
    • /
    • 1998
  • The silicon-nirtide membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PRO($PbTiO_3$ ) layer for a IR detection was coated on the membrane and its characteristics were measured. The a attack of PTO layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer were eliminated through the method of bonding/etching of silicon wafer. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by the PTO layer were measured, too.

  • PDF

Anaerobic Direct Seeder Engineering Component of the Rice Anaerobic Seeding Technology

  • Borlagdan, Paterno C.
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
    • /
    • pp.1009-1020
    • /
    • 1996
  • Direct-seeded rice can have comparable yield with transplanted rice if its inherent problems can be solved. It is a labor-saving technology and can significantly reduce production cost because seedling nursery , pulling , and transplanting are omitted. Turnaround time between cropping is reduced hence the possibility of a third annual crop. But direct-seeded rice is very vulnerable to pest attack (by birds, rats, and golden snails), desiccation, weed infestation, and prone to lodging resulting to unstable crop establishment and inconsistent yield. These problems can be solved by anaerobic seeding (sowing pre-germinated seeds under the soil). It requires precise seed placement into the soil to optimize its benefits. We developed a four-row anaerobic direct seeder (US $ 200 commercial price) for this purpose . It consist of a structural framework mounted with a drum -hopper metering device, flotation type drivewheels, spring-loaded and adjustable furrow closers, and furrow open rs, and a plastic rainguard. It can sow in line pre-germinated seeds into the soil thus permitting the use of mechanical weeders for a chemical-free weed control. Its performance was comparable with the Japanese two-row anaerobic seeder (costing US$400) in terms of seed placement and crop establishment. It was tested with five cultivars. Seeding rate varied from 38 kg/ha to 80kg/ha. Crop establishment ranged from 64 to 99 percent while grain yield varied from 3.0 t/ha to 5.4t/ha. A six-row anaerobic seeder was also developed and adapted to a powertiller for increased capacity , field efficiency , and easier operation. The anaerobic seeder is useful to farmers shifting to direct seeding to reduce rice production cost and to researchers conducting agronomic studies in direct-seeded rice. Blueprint of the machine is available free of charge from IRRI.

  • PDF