• Membrane Journal
• /
• v.25 no.1
• /
• pp.75-83
• /
• 2015

In this study, chlorophylls were been extracted from common local plants, deposited on polypropylene (PP) substrate using various approaches, and the oxygen generation effect of the chlorophylls were investigated. The loading of chlorophylls on the substrates was achieved by dipping and spraying methods, where the spraying coating showed overall better results regarding oxygen generation from the combustion experiments in the closed vessel or in the isolated vacuum oven cell than those of dip coating. In addition, a composite substrate was prepared by nylon6/6 nanofiber on the PP substrate, and it exhibited an increase in the activation of chlorophylls. In the case of samples containing titanium dioxide ($TiO_2$), the reaching time of oxygen concentration from 16% to 21% and the combustion test using a candle for a sample with 50% chlorophylls showed similar results to those of a sample without $TiO_2$. As such, combining a spray coating and $TiO_2$ incorporation into gas separation membrane systems are expected to be useful to understand the fundamentals of material properties for their applications as oxygen generation membranes and air filtration systems.

• Food Science of Animal Resources
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2004

The effects of chitosan dipping treatments with different molecular weights on the meat quality of Hanwoo(Korean Cattle) beef during refrigerated storage were investigated. The beef(M. Semimembranosus) were dipped in 0.5% chitosan(in 1% acetic acid) with two different molecular weights(Mw=150 and 600 kDa) for 5 min and stored at $1^{\circ}C$(90% RH). The pH was significantly(p<0.05) higher in chitosan(600 kDa) group than in the other groups. The L＊ value for 3 days was significantly(p<0.05) higher in chitosan (600 kDa) group, but it was not significantly(p>0.05) different after 6 days. The a＊ value of day 0(before storage) was not significantly(p>0.05) different among the treatment groups, however the a＊ value of day 12 was significantly(p<0.05) higher in chitosan(150 kDa) group. The metmyoglobin(%) was significantly(p<0.05) lower in chitosan(600 kDa) group. The total bacterial counts of day 0(before storage) were significantly(p<0.05) lower in chitosan(600 kDa) group, but during storage, the chitosan(150 kDa) group was effective in antibacterial activity. The chitosan(l50 kDa) group had significantly(p<0.05) lower shear force than the other groups over time.

• Research in Plant Disease
• /
• v.22 no.3
• /
• pp.152-157
• /
• 2016

Root-dipping inoculation method has been used to investigate resistance of radish plants to Fusarium wilt. However, the method requires a lot of labor and time because of complicate procedure. This study was conducted to establish a simple and effective mass-screening method for resistant radish to Fusarium wilt. Radish seedlings of susceptible and resistant cultivars were used to investigate wounding method by scalpel, inoculum concentration, and pathogen-inoculated growth stage of seedlings. We established an efficient mass-screening method based on our results as following: Roots of 14-day-old seedlings of radish are cut with a scalpel at a $90^{\circ}$ angle to a 2 cm-depth at a 1 cm-distance from main stem and then inoculated by pouring with a 10 ml-aliquot of a fungal spore suspension ($1.0{\times}10^7conidia/ml$) on soil. The inoculated plants are cultivated in a growth room at $25^{\circ}C$ for about 4 weeks with 12-hour light a day. The proposed screening method enables to effectively select resistant from mass radish plants cultivars to Fusarium wilt.

• Economic and Environmental Geology
• /
• v.19 no.1
• /
• pp.1-18
• /
• 1986

A group of 16 $Zn+Pb{\pm}Ag$ deposits distributed in the Pyeongchang-Jucheon area, Kangwon-do, South Korea, were semi-regionally investigated. These deposits are contact metasomatic and/or hydrothermal replacement types hosted in the carbonate-dominated Cambrian Machari Formation and Ordovician Ibtanri Formation, and also in the carbonate interbeds of the Precambrian argillic metasediments. Comparing some key aspects of the individual deposits, it is found that the ore deposits hosted in the Machari and Ibtanri Formations are mostly of steeply-dipping chimneys with or without skarn minerals and are rich in Ag and Pb>Zn in metal grade whereas those occuring in the carbonate interbeds of the Precambrian argillic metasediments are gently-dipping conformable lenticular orebodies mostly with skarn minerals and are generally poor in Ag and Zn>Pb. The skarn mineralization in the area appears to have occurred during the lower Cretaceous (118.7Ma) to mid-Cretaceous (107.8Ma) time assumed from the K-Ar dates of the Dowon and Pyeongchang granites which are closely associated with the skarn ore deposits. The Rb/Ba/Sr ratios of these granites indicate that they are of strongly differentiated anomalous granites, and the Nb vs. Y and Rb vs. Y+Nb plots fall on the field of volcanic arc setting. The contact aureoles are zoned, giving the sequence in order of increasing distance from igneous contact: garnet-wollastonite, granet-wollastonite-clinopyroxene and garnet-clinopyroxene in such as the Pyeongchang and Yeonwol 114 areas. Electron microprobe analyses reveal that garnets and clinopyroxenes are generally low in Fe and Mn. Garnets are grossular to intermediate grandite except for those from the Ogryong exoskarn which are richer in andradite, pyrope and spessartine fractions. This indicates that the oxidation state of skarn-forming environment at Ogryong was higher than at the other deposits. Clinopyroxenes are mostly salitic except for those from the Ogryong exoskarn which involve considerable amounts of hedenbergite and johansenite fractions. The ${\delta}^{18}O$ value of Jurassic biotite granite at Ogryong is higher (+10.21‰) than that of Cretaceous one at Chodun (+8.41‰). The ${\delta}^{13}C$ values of carbonate rocks range from -0.89‰ to 0.68‰ and the ${\delta}^{18}O$ values range from +11.91‰ to + 19.34‰ indicating that these carbonate rocks are of marine origin. However, the ${\delta}^{13}C$ values of skarn calcite and vein calcite are -4.80‰ and -12.92‰, and the ${\delta}^{18}O$ values are +5.56‰ and +10.32‰, respectively, indicating that these calcites are of hydrothermal origin. The ${\delta}^{34}S$ values of sulfide minerals range from +4.4‰ to +8.7‰ suggesting that the sulfurs are of magmatic origin.

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.384-388
• /
• 1996

This research was conducted to investigate the effective methods for browning inhibition on yam (Dioscorea aimadeimo) during dehydration by physical and chemical pretreatments. Moisture, crude protein, crude fiber and N-free extract contents of yam were 81.17%, 1.43%, 0.29% and 15.81%, respectively. Yams were sliced to 0.5 cm thickness and placed to single and poly layer in plastic tray, and then changes of their weights were measured during air dehydration at $50^{\circ}C,\;65^{\circ}C,\;and\;80^{\circ}C$. The dehydration time reaching to optimum moisture level for the pulverization of the yam slices were 10, 6, 3 hours(single layered) and 12, 7, 5 hours(multi layered) at the respective temperature. To inhibit browning at $80^{\circ}C$ air dehydration, water and steam blanching, microwave treatment effects were investigated on yam slices for 30 sec. and 60 sec. Steam blanching for 30 sec. was comparatively effective to inhibit browning of yam slices. Yam slices were immersed in single and combined browning inhibitor solutions and evaluated for browing degree during dehydration by the values of Hunter L, a, b and ${\Delta}E$. The most effective pretreatment to inhibit browning of yam slices was immersion In the solution containing 500 ppm of citric acid and 1000 ppm of cysteine for 1 min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1385-1389
• /
• 2004

For the development of better Gulbi processing, brine salting method was applied for the Yellow croaker (Larimichthys polyactis). The changes of moisture contents, salt contents, and total microbial numbers in Yellow croaker were measured following different brine concentration (20, 30%), temperature (5, 25, 35$^{\circ}C$), and soaking time (1, 6, 12, 24 hours) by brine salting method. Rate of salt penetration into Yellow croaker muscle increased as higher brine concentration and higher dipping temperature. When compared to commercial products of Gulbi by dry-salting method, the moisture and salt contents in Yellow croaker showed similar values after treated with 20% brine at $25^{\circ}C$ for 1 hour. The weight of Yellow croaker increased about 4% when immersed it in 20% brine at 5$^{\circ}C$ for 24 hours. There was no weight change at $25^{\circ}C$ dipping temperature and reduced 7% of weight at 35$^{\circ}C$ dipping temperature. At 30% brine concentration, the weight of Yellow croaker reduced 1%, 9%, and 13% on weight at 5$^{\circ}C$, $25^{\circ}C$, and 35$^{\circ}C$, respectively. Total microbial counts in Yellow croaker muscle soaked at 30% brine showed 1 log lower numbers than 20%. The muscles had about 1 log higher microbial numbers than the treated brine solution. An ethanol extract of onion peel added to brine for giving better color and for preventing oxidation on Gulbi lipid. The treated group showed higher Land b values on Gulbi surface as well as antioxidant effect on the extracted oil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4100-4105
• /
• 2013

The Peanut sprouts have been used as food for long time in many Asian countries. Among them, resveratrol have bioactivity effects as antioxidant and anticancer. In this work, resveratrol was extracted from peanut sprouts by dipping(extraction time 3h, $25^{\circ}C$) method. And extraction efficiency and amount was identified using on-line screening HPLC-ABTS. From the experimental results, it is evident that the amount of resveratrol($0.310-0.346{\mu}g/mL$) by 50% aqueous EtOH was higher than any 100% water and EtOH composition. Also, the 100% water extracts sample was low yield 2.040-2.145%. The shown results can be applied as sources for pharmaceuticals and functional material.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.71-76
• /
• 2010

In this study the optimum dyeing conditions and blocking effect of UV deodorization efficiency of Ligustrum japonicum Thunb were investigated. Colorants were water-extracted from Ligustrum japonicum Thunb fruit and freeze-drided to obtain colorants powder. The effects of dye concentration, dyeing temperature, dyeing time, and the number of dipping count were studied. Fastness to dry cleaning, rubbing, perspiration, and light were measured according to KS K 0644, KS K 0650, KS K 0715 and KS K 0700, respectively. In order to examine the dyeability according to dyeing conditions, reflectance of fabrics were measured by using UV/VIS spectrophotometer. The bath ratio was 1:20. Dyeing concentration was 100, 200, 300, 400 and 500% on the weight of fiber. Dyeing time was 20, 40, 60, and 80 minutes. Dyeing temperature was 20, 40, 60, 80, and $100^{\circ}C$. The infrared high pressure dying machine was used. As dyeing concentration increased, dye adsorption increased up to 400% and it slowed down. Dye uptake was increased with raising themperature up to $80^{\circ}C$ and it slowed down. Dye adsorption occurred rapidly at first 20 minutes and then it slowed down and reached almost maximum dye uptake at 60 min. Dye uptake increased by repeated dyeing. Therefore, it is considered that optimum dyeing condition is 400%(o.w.f.), $80^{\circ}C$, 60 min. And repeated dyeing improves dye uptake. Color fastness to dry cleaning and rubbing was good, but light fastness and perspiration fastness was not good. Blocking effect of ultraviolet radiation and deodorization efficiency was good.

• Journal of Photoscience
• /
• v.5 no.3
• /
• pp.105-109
• /
• 1998

By using the liquid -phase-deposition (LPD) process, which has a potetnial of preparing organic inorganic composite materials, samples doped with benzo[f]quinoline (BfQ)into silica thia films wre prepared. We observed the fluorescene and fluorescene excitation spectra of the samples, as well as the fluorescence lifetimes and time-resoluved fluorescence spectra. The comparison of thefluorescence spectra in pH-controlled buffer solutions yields the results that the dominant species of BfQ in the LPD silica films is a protonated one. The fluorescence band assigned to a hydrogen-bonded species was observed on the samples prepared from the dipping solutions of 3 and 2 M hexafluorosilicic acid. The band assignment was confirmed by the fluorescence lifetime measurement. The FT-IR M hexaflurosilicic acid. The band assignment was confirmed by the flurescence lifetime meausurement. The FT-IR data proved the existence of included water in silica films prepared from the LPD process. The appearance of the band corresponding to the hydrogen-bonded species within LPD silica phases was explained by the proesence of included water. Depending on the preparation conditions of LPD silica films, the band assigned to protonated species shows bad shifts in a wavenumber region between the peak of hydrogen-bonded and typical protonated species. This implies that there is some distribution of steric conformation of protonated species of BfQ interacting with adsorbing sites of LPD silica. The time -resolved fluorescence spectra suggest that some relaxation process is involved in the conformation of BfQ doped into the solid phase of LPD silica.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.175-182
• /
• 2010

Two insecticides, fenobucarb (36, 12 ppm) and imidacloprid (0.7, 0.4 ppm) were treated on rice seedling roots by root uptake method with different dipping time (1, 4, 8, 12, 16, 20, 24 hrs). This study was performed to elucidate the correlation between insecticidal activity and feeding behavior of Nilaparvata lugens using EPG (electrical penetration graph). EPG waveforms are recorded for 4 hours and classified into six waveforms. In the correlation between root uptake and corrected mortality, both insecticides showed higher corrected mortality as higher doses and as longer root uptake times. In the analysis of waveforms, N. lugens showed longer nonprobe time but shorter phloem feeding time at a higher dose. It was also showed the same result as longer the root uptake times. Therefore, it showed the correlation between insecticidal activity by root uptake time and both EPG waveforms (non-probing time and phloem feeding time).