• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.4
• /
• pp.221-226
• /
• 1977

The quality changes of yellow sea bream, Branchiostegus japonicus japonicus, during frozen storage were mentioned from the view point of commercial value. The experiments were conducted to find out the effective storing method by varying the storage temperatures $(-5^{\circ}C,\;-35^{\circ}C)$ and pretreatment with chemicals $(0.l\%\;BHA,\;1\%\;sodium\;Polyphosphate)$. The samples were stored for 6 months at $-5^{\circ}C$ and $-35^{\circ}C$ after dipping in the chemical solutions and packing with polyethylens film. The extractibility of salt soluble protein of sample stored at $-35^{\circ}C$ was higher than that of samples stored at $-5^{\circ}C$, while the chemical treatments were not so much effective. Difference in the amount of free water released from samples was obvious between $-5^{\circ}C$ and $-35^{\circ}C$ storage, and that of samples treated with sodium Polyphosphate was much less than the BHA-treated ones. VBN content was differed by varying the storage temperature whereas no effect by the chemical treatments. TBA value of the sample storage at $-35^{\circ}C$ was lower than $-5^{\circ}C$ and the effect of chemicals on the development of oxidation was in order of sodium polyphosphate, BHA and control. Carotenoid content also changed by varying the storage temperature and the color was completely faded out with quality deterioration after 3 months storage at $-5^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.45-49
• /
• 1972

The following are some results obtained from a series of experiments in rotifer culture and its usage for the food of tiny fish fry: 1, Outdoor concrete ponds, each being $16m^2$, were used to culture the rotifers, Brachionus calyciflorus, and Filinia longiseta. Brachionus calyciflorus usually attained the population of about 100 individuals per ml of pond water. Dipterex was usually applied to control Daphni,a and other crustaceans that generally appear and feed on rotifers. A concentration of 0.16 to 0.2 ppm in the pond water was sufficiently effective to control these natural enimies of rotifers. Poultry dung was very effectively used to multiplicate rotifers. The fertilization ratio was about 8 kg each pond with 30cm depth of water. 2. The tiny rotifer, Filinia longiseta attained a very high population density of about 1,000 individuals per ml of pond water, but they were very sensitive to dipterex, and for this aspect future investigation may be needed. 3. In the outdoor ponds, the multiplication of rotifers significantly decreased when the water temperature falls to about $20^{\circ}C$ in autumn. 4. In the laboratory room, unicellular planktonic algae such as Scenedesmus or Chlorella, as the food of rotifers, were collected from the outdoor ponds by dipping them together with water, and were effectively used for the culture of Brachionus calyciflorus. If the planktonic algae are cultured in specially designed containers, the sun-light would be the most effective means as the source of light. 5. Brachionus calyciflorus cultured in the outdoor ponds by the dipterex controlled method was highly efficient to rear the early fry of marble gourami. The dipterex content mixed in the water to control the crustacean emmies of rotifers sieved no harm to the gourami fish fry.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.61-68
• /
• 2008

The roof structural model of liquid manure storage tank was designed to improve a structural safety and an ability of resistance to corrosion by the bad environmental condition with high humidity and high gas concentration. Due to corrosion of a general steel, the 5 years used materials were reduced to one-third of a new material in the result of a bending strength test. Some structural materials were tested to evaluate a strength and an anti-corrosion, and stainless steel pipe (STS439), steel angle with zinc hot dipping, rectangular steel pipe covered with FRP (Fiberglass Reinforced Plastics) resin were selected finally. A stainless steel is more expansive about $3{\sim}5$ times than general structural steel. But its durability under heavy corrosive environment is expected twice as long as general steel. The roof models were designed as closed cone type for each of the three structural materials. In the result of a FEM (Finite Element Method) structural analysis for the developed models, the safe snow depth was higher 2.3 times than a general roof structure, when elements of equal section modulus were used.

• Korean journal of applied entomology
• /
• v.32 no.3
• /
• pp.259-264
• /
• 1993

The experiment was carried out to investigate Insecticide susceptibility of the spiraea aphid (Aphis citricola) in apple orchards In Korea, using dipping method. Although insecticIde susceptibility vaned with local and seasonal populations, the susceptibility to demeLon S-rnethyl and phosphamidons was different from that Lo the other insecticides. The LCso values were 10 ppm for deltamethrin and chloropyrifos, 103 ~ 629 ppm for demeton S-methy1, acephate, phosphamidon, monocrotophos and vamldothion, 12,200 ppm for EPN, and 1,745 ppm for pirimicarb. 'When Insecticide susceptibility was compared between the S-clone selected from a population on the host plant spiraea and the R-clone selected from a population on the apple tree, the resistance ratio as expressed by RIS ratio of $LC_{50}$ was 78 for phosphamidon and 546 for pirimicarb. Esterase zymogram determined by the agar gel electrophoresIs revealed a significant difference between the clones. The activity of the E2, E5, E6 and E7 of the R-clone was higher than that of the S-clone, It is suggesLed that the Increased esterase activity may be involved in the mechanism of insecticide resistance in the spiraea aphid, although the involvement of other factor(s) may not be ruled out.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.438-444
• /
• 2006

This study was carried out to obtain fundamental data such as peeling efficiency and quality of potatoes and sweet potatoes peeled by hand, machine and alkali(NaOH). The weight loss by peeling was influenced by peeling methods. Weight losses by rotational brushing-type peeler showed the lowest value, 7.9% in potato, and 7.3% in sweet potato. Any significant differences in moisture content were not found in potatoes and sweet potatoes by peeling methods. The pH of potatoes and sweet potatoes just after peeling were 5.8-6.8 and 6.23-6.63, and decreased somewhat until 3 hrs after peeling. Hardness of potatoes and sweet potatoes peeled by hand with fruit knife were better than that of others. Depending upon the peeling method used the color and color differences undergo some changes in their color and browning. Color difference value of peeled potatoes by hand with a technical tools, and by mechanical peeler such as rotational cutting-type peeler and rotational brushing-type peeler showed just slightly. In particular, changes of rotor differences value of potatoes and sweet potatoes peeled by dipping with 10% NaOH solution at $100^{\circ}C$ was the highest in the samples peeled by NaOH.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.490.2-490.2
• /
• 2014

Since the general solar cells accept sun light at the front side, excluding the electrode area, electrons move from the emitter to the front electrode and start to collect at the grid edge. Thus the edge of gridline can be important for electrical properties of screen-printed silicon solar cells. In this study, the improvement of electrical properties in screen-printed crystalline silicon solar cells by contact treatment of grid edge was investigated. The samples with $60{\Omega}/{\square}$ and $70{\Omega}/{\square}$ emitter were prepared. After front side of samples was deposited by SiNx commercial Ag paste and Al paste were printed at front side and rear side respectively. Each sample was co-fired between $670^{\circ}C$ and $780^{\circ}C$ in the rapid thermal processing (RTP). After the firing process, the cells were dipped in 2.5% hydrofluoric acid (HF) at room temperature for various times under 60 seconds and then rinsed in deionized water. (This is called "contact treatment") After dipping in HF for a certain period, the samples from each firing condition were compared by measurement. Cell performances were measured by Suns-Voc, solar simulator, the transfer length method and a field emission scanning electron microscope. According to HF treatment, once the thin glass layer at the grid edge was etched, the current transport was changed from tunneling via Ag colloids in the glass layer to direct transport via Ag colloids between the Ag bulk and the emitter. Thus, the transfer length as well as the specific contact resistance decreased. For more details a model of the current path was proposed to explain the effect of HF treatment at the edge of the Ag grid. It is expected that HF treatment may help to improve the contact of high sheet-resistance emitter as well as the contact of a high specific contact resistance.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.236-241
• /
• 2009

The objective of this study was to find an environment friendly method of ginseng storage disease control using a natural plant extract. Essential oil was evaluated in terms of its antifungal ability against a variety of ginseng storage pathogens, and a variety of essential oils was conducted in order to assess the possibility of applying them as a component of a disease control strategy. Direct treatment with essential oil was demonstrated to exert a ginseng storage control effect. Methyl eugenol and thymol were shown to exert a mycelial growth inhibition effect of 80% on PDA media, using a paper disc containing 200 ppm of essential oil against Botrytis cinerea. The application of direct methyl eugenol treatment to ginseng resulted in a profound control effect. Both spray and dipping treatment of each methyl eugenol as well as thymol, evidenced a disease develoment of 10-20% as compared with the over 80% observed from all non-treated packages. Methyl eugenol in the large packages resulted in a disease index of 0.60 in the two essential oil treatments and also a small diseased area, as compared with the disease index of 1.65 and the wide diseased area observed in the non-treatment groups. Treatment with a mixture (methyl eugenol + thymol) in the synergistic effect test resulted in a relatively wide diseased area, as no discernable synergistic effect was detected. Methyl eugenol and thymol can be utilized as control agents in an environmentally friendly ginseng storage treatment, owing to the avirulent and clear effects detected in this study. In particular, ginseng must be ingested when fresh, and this is why a product for the control of ginseng storage diseases is so necessary.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.137-147
• /
• 2008

Fault rupture directivity of the Odaesan earthquake, which was inferred to be the main cause of the high PGAvalue (> 0.1 g) unusually observed at the near-source region, was analyzed by using the data from the nearby (R < 100 km) dense seismic stations. The Boatwright's method (2007) was adopted for this purpose in which the azimuth and takeoff angle of the unilateral rupture directivity function could be estimated based on the relative peak ground-motions of seismic stations resulting from the nature of the rupture directivity. In this study, the approximate values of the relative peak ground-motions was derived from the difference between the log residuals of the point-source spectral model (Boore, 2003) for the main and secondary events based on the Random Vibration Theory. In this derivation, the spectral difference for a frequency range between the source corner frequencies of main and secondary events was considered to reflect only the effect of the fault directivity. The inversion result of the model parameters for the fault directivity function showed that the fault-plane of NWW-SEE direction dipping steeply to the North with high rupture velocity near upward in SE direction is responsible for the observed high level of ground-motion at the near-source region.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.167-178
• /
• 2002

Properties of discontinuity for Seoul Granite in northeastern part of Seoul City were analyzed by dividing structural domains into Surak and Bulam Mtn. areas. Important parameters measured among several engineering properties of a rock during tunnel excavation and road construction are as follows: 1) Orientation of joint, 2) joint spacing, 3) joint density, and 4) uniaxial compressive strength. Orientation, spacing, and density of joints can be directly measured during field investigation using scanline survey, circle-inventory method, and window survey. Uniaxial compressive strength of the rock was calculated by a simple correlation equation although it is originally necessary to prepare core samples in measuring it. Major orientations of joints measured from both areas are 3 sets of joints with different orientations. In other words, they are 2 sets of orthogonal joint and 1 set of sheet joint that is dipping at low angle, and have very similar orientations in both areas. Joint densities in both areas range from 0.039 and 0.066/cm, and average joint length are between 1.30 and 4.52m. Average joint spacing also has values from 10.3cm up to 59.6cm, and shows significant difference along specific orientation of scanlines measured. Values of uniaxial compressive strength calculated on the basis of Schmidt hammer rebound values range from 217 to 335 MPa, which indicates very strong rock type by classification of wall strength.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.333-340
• /
• 2019

This paper was described about the preparation of the multi-functional mask pack and its evaluation. Here, the multi-functional effects means the far-infrared emissivity effect due to polyphosphoric acid, the freckles treatment effect and peeling effects due to inclusion complexes, and the skin temperature decreasing effect due to Lavender-extraction compounds. The the hazardous chemicals, viscosity, and pH were determined blow 0.01%, 280 cP, and pH=6.92 in the prepared multi-functional mask pack solution, respectively. The multi-functional mask pack prepared with dipping method in the solution were showed the value of $0.882{\mu}m$ (Far-infrared emissivity) and $3.40{\times}10^2W/m$ at $37^{\circ}C$ (Far-infrared radiation energy), respectively. After taking multi-functional mask pack, the skin moisturizing rate was indicated 35.5%, and the skin temperature was showed in the range of $24{\sim}26^{\circ}C$. The skin stimulation test for the 30 volunteer was showed very strong stability.