• Bulletin of the Korean Chemical Society
• /
• 제21권4호
• /
• pp.389-392
• /
• 2000

A simple and inexpensive colorimetric spectrometer for determining total cholesterol has been developed,comprising a diode laser as the light sourcoptical fibers for the light guide and a photodiode as the detector.The stabilty and performance of the new system was investigated by obtaining the calibration curve for stan-dard cholesterol solutions. The total cholesterol in humanserum was also measured by the analyzer and com-pared with the value obtained by a conventional spectrometer. The results showed that the developed spectrometer was useful for the determination of cholesterol levels. The visible diodelaser used in the study exhibited good spectroscopic and operational properties for colorimetric absorption spectrometry and could be a key component for the development of a simple and economical analyzer.

• 한국광학회지
• /
• 제23권3호
• /
• pp.124-127
• /
• 2012

본 논문에서는 고출력 광섬유 레이저에서 역입사되는 레이저 광으로부터 펌프 LD를 보호하기 위한 반사형 2색 필터를 설계하고 제작하였다. 펌프 LD 발진 파장인 905 nm~925 nm 대역에서 투과율은 0.1%이하, 광섬유 레이저 출력 반사광이나 브릴루앙 산란광 파장대역인 1020 nm~1100 nm 대역에서 투과율은 99.9% 이상이 되도록 필터를 설계하였다. 기판(Substrate)은 $SiO_2$로 사용하고 접착력이 우수한 Oxide 계열 물질인 $SiO_2/Ta_2O_5$를 박막 재료로 사용하였다. 최적화된 설계를 한 후 필터를 제작하였고, 그 특성을 비교하였다. 제작된 필터의 투과율이 905 nm ~ 925 nm 대역에선 0.1%이하, 1020 nm~1100 nm 대역에선 95.5%이상으로 측정되어 공정오차를 고려한 설계범위 안에 들어옴을 확인하였다. 제작된 필터는 레이저 출력 1W이상의 입력광에 대해서도 정상 동작함을 확인하였다.

• 대한한방소아과학회지
• /
• 제29권4호
• /
• pp.29-38
• /
• 2015

Objectives We aimed to identify the effectiveness of photobiomodulation using low level laser therapy (LLLT), light emitting diode (LED) and others on the growth of the length of the growth plate by reviewing literatures. Methods We searched literatures using PubMed, Science Direct, CINAHL, Korea Traditional Knowledge Portal (KTKP), Oriental Medicine Advanced Searching Integrated System (OASIS), China Knowledge Resource Integrated Database (CNKI), Japan Science and Technology Information Aggregator, Electronic (J STAGE), and Japan National Institute of Informatics Scholarly and Academic Information Navigator (CiNii) using the keywords "Growth plate" "Epiphyseal growth" "Epiphyseal plate" and "Laser", "light emitting diode (LED)", "near-infrared light", and "photobiomodulation". Search range included only original article which provided English abstract were selected. The search strategy contained no language limitation. Results A total 556 studies were found. Then, 551 were excluded by scanning titles and abstracts and finally 5 articles were selected. Five articles were RCTs using rodents. Two of the 5 articles used InGaAlP Laser (630-685 nm), and the other 3 articles used GaAlAs Laser (780, 820, and 870 nm) to investigated the effects of LLLT on the growth of the length of the epiphyseal cartilage and the number of chondrocytes and thickness of each zone of the epiphyseal cartilage. Two articles concluded that LLLT had a beneficial effect on the longitudinal growth of the growth plate. In growth of the epiphyseal plate, there were no significant differences in others. Conclusions It is might that LLLT influenced on the growth of epiphyseal plate by positive affect. However, further rigorous RCTs are warranted.

• 전자공학회논문지D
• /
• 제36D권5호
• /
• pp.88-98
• /
• 1999

레이저의 종축방향으로 회절격자층을 형성하는 위쪽 클래딩 층의 가운데 부분의 굴절률을 양 옆부분과 다르게 하여 유효위상천이 효과를 넓은 영역에서 얻는 refractive index midulated (RIM) DFB 레이저를 제안한다.RIM-DFB 레이저는 SHB 효과를 줄이기 위하여 기존에 제안되었던 회절격자의 주기를 변화시켜 넓은 영역에 걸쳐서 유효 위상 천이를 주는 corrugation pitch modualtion (CPM) 방법과 레이저의 종축 방향으로 결합계수를 달리하여 주는 distributed coupling coefficients (DCC) 방법의 효과를 동시에 얻을 수 있는 실현 가능한 구조이다. 급격한 위상천이가 없기 때문에 광자밀도분포가 균일해져 SHB 효과가 줄어 들게 되며 레이저 공진기 가운데 부분의 결합계수가 양 옆 부분의 결합계수보다 커서 분포결합계수의 효과를 주기 때문에λ/4 위상천이 레이저와 CPM-DFB 레이저에 비해 고출력에서 좋은 단일 모드 특성을 보인다. 그리고, 굴절률이 다른 가운데 부분의 길이가 RIM-DFB 레이저의 동작특성에 미치는 영향에 대하여 연구하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권2호
• /
• pp.120-124
• /
• 2009

The concept of biostimulation of wounds by low-level laser therapy(LLLT) is attracting considerable attention. Although its effect on whole tissues has been studied quite extensively, the biological and cellular mechanisms underlying LLLT have not been clarified. In an experimental radius fracture in rabbits, Tang and Chai reported that LLLT enhanced the activity of red blood cells, macrophages, fibroblasts, chondrocytes, and osteoclasts within the fracture area. The purpose of the present study was to evaluate the effect of LLLT with a GaAlAs diode laser device on bone healing in rabbit mandibular fractures. We use 12 rabbits for this study. All rabbits were fractured mandible angle area using saw in anesthetic condition. In control group(n=6), none treatment was performed at fracture site. In experimental group(n=6), LLLT with a GaAlAs diode laser was radiated at fracture site daily for 7 days. All rabbits were sacrificed at 6 weeks later from performed fracture day. We studied the immunohistochemical staining of CD34 and Vimentin and the histochemical analysis for calcium and phosphorus content. The results were as follows. 1. In the histological and immunohistological staining, after 6week, fibroblasts, osteogenic cells and collgen fibers were observed more in experimental group than in control group. 2. In the histochemical analysis, the amount of calcium and phosphorus contents of the experimental group were more than the control group. From the results obtained, we suggest that the bone healing is stimulated by low-level laser irradiation in bone fractures.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.707-711
• /
• 2016

ITO/Ag/ITO conductive films on PET (polyethylene terephthalate) was etched by a Q-switched diode-pumped neodymiun-doped yttrium vanadate (Nd:YVO4, ${\lambda}=1064nm$) laser. During the laser direct etching, the laser beam was incident on the two different directions of PET and the etching patterns were investigated and analyzed. At a lower repetition rate of laser pulse, the larger laser etched patterns were obtained by laser beam incident on reverse side of PET substrate. On the contrary, at a higher repetition rate, it was possible to find the larger etched patterns in case of the laser beam incidence on forward side of PET substrate. For the laser beam incidence on reverse side, the laser beam is expected to be transferred and scattered through the PET substrate and the laser beam energy is thought to be dependent on the etch laser pulse beam energy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.943-946
• /
• 2004

We report the laser scanning display as an emerging technology. We show demonstration system of laser TV, Video image is made by using a high speed MEMS scanning mirror and a direct-modulated red diode laser. We designed and fabricated MEMS scanning mirror. The first demonstration system showed a NTSC-resolution video image with the image size of 5 inches. The successful development of compact laser TV will open a new area of home application of the laser light.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.606-611
• /
• 2002

Welding using lasers can be mass-produced in high speed. In the laser welding, performing real-time monitoring system of the welding quality is very important in enhancing the efficiency of welding. In this study, the plasma and molten metal which are generated during laser welding were measured using the UV sensor and IR sensors. The results of laser welding were classified into five categories such as optimal heat input, little low heat input, low heat input, partial joining due to gap mismatch, and nozzle deviation. Also, a system was formulated which uses the measured signals with a fuzzy pattern recognition method which is used to perform real-time evaluation of the welding quality and the defects which can occur in laser welding.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.293-324
• /
• 1996

Compact solid-state blue laser have great potential for use in optical data storage, laser beam printing, particle countering, reprographics, holography, and fluorescent bioanalysis. We report recent progresses in qualities of LiB3O5 and K3Li2(TaxNb1-x)5O15 nonlinear crystals which are essential in manufacturing bulk-type blue SHG devices. We also review newly developed violet-blue laser, 20 mW output, using intracavity frequency doubling of a diode laser pumped Cr:LiSrAlF6 laser with low loss LiB3O5 crystal as a frequency doubler.

• 한국통신학회논문지
• /
• 제11권3호
• /
• pp.204-210
• /
• 1986

本 論文에서는 半導體 레이저를 使用하여 헤테로다인 光通信 方式을 具現시키기 爲하여 必要한 半導體 레이저의 發振周波數 安定化 시스템을 이제까지의 周波數 安定化만을 考慮한 方式에서 光出力 安定化를 爲한 歸還回路를 追加하므로서 旣存의 周波數 安定化만을 考慮한 方式에서보다 周波數安定度를 約5倍 改善시켰다.