• Transactions on Electrical and Electronic Materials
• /
• 제3권1호
• /
• pp.1-3
• /
• 2002

A p-n junction was obtained by the deposition of an n-type ZnO thin film on a p-type Zn-doped InP substrate. The Zn-doped InP substrate has been made by the diffusion of Zn with sealed ampoule technique. The ZnO deposition process was performed by pulsed laser deposition (PLD). The p-n junction was formed and showed typical I-V characteristics. We will also discuss about the realization of an ultraviolet light-emitting diode (LED). The structure of n-ZnO/p-Zn-doped InP could be a good candidate for the realization of an ultraviolet light-emitting diode or an ultraviolet laser diode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.126-129
• /
• 2001

A p-n junction was obtained by the deposition of an n-type ZnO thin film on a p-type Zn-doped InP substrate. The Zn-doped InP substrate has been made by the diffusion of Zn with sealed ampoule technique. The ZnO deposition process ws performed by pulsed laser deposition (PLD). The p-n junction was formed and showed a typical I-V characteristic. We will also discuss about the realization of an ultraviolet light-emitting diode (LED). The structure of n-ZnO/p-Zn-doped InP could be a good candidate for the realization of an ultraviolet light-emitting diode or an ultraviolet laser diode.

• Medical Lasers
• /
• 제8권2호
• /
• pp.94-96
• /
• 2019

Burns are one of the most extensive injuries of soft tissues as well as skin, occasionally resulting in extensive, deep wounds and death. Burn wounds can lead to severe physical and psychological distress because of excessive scarring and skin contractures. Treatment of burn wounds has always been a challenging problem and many different methods have been used to treat such injuries. We report here on treating a patient with a burn wound using 830-nm light emitting diode (LED) phototherapy combined with epidermal growth factor (EGF) solution. After five daily sessions of LED with EGF solution treatment, the patient demonstrated nearly complete improvement with no remarkable side effects. We suggest that LED phototherapy combined with EGF solution could be an effective and safe treatment option for treating burn wounds.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.159-165
• /
• 2001

Recently Moire and PMP(Phase Measuring Profilometry) are adopted as a practical methodology for non-contact 3-D measurement of free surface. These methods extract the 3-D informations from the images of the object projected with stripe-pattern light. This paper presents a simple projector generating stripe-pattern light using expensive polygon mirror. In this projector, slit-beam is generated with a Laser diode and a rod lens and the laser diode is switched on/off synchronizing with the rotation of the polygon mirror. So its structure is very simple and light-weighted compared to the existent projection methods using several lenses and it is also easy to change the pitch and the phase of the stripe pattern. Experimental results show that the intensity profile of the stripe pattern can be approximated with sinusoidal curve by reducing the pitch of the stripe pattern.

• 한국광학회지
• /
• 제8권2호
• /
• pp.116-121
• /
• 1997

주위온도에 따른 레이저다이오드의 광출력의 변화는 정전류로 구동하는 경우와 정전압으로 구동하는 경우에 서로 다르다. 레이저다이오드를 정전류로 구동하는 경우에는 온도증가에 따라 밀도반전이 감소하므로 광출력이 감소한다. 그러나 정전압으로 구동하는 경우에는 이러한 열효과에 의한 광출력의 감소이외에 내부저항과 임계전압의 감소에 의한 주입전류의 증가효과가 있어서 열효과를 일부 상쇄하므로 광출력의 변화가 정전류로 구동할 때보다 적다. 특히 정전압으로 레이저다이오드를 구동하는 경우에 이 두가지 효과에 의한 광출력의 변화폭이 비슷하여 서로 상쇄되는 동작점 부근에서는 온도에 따른 광출력의 변화가 아주 적어져 정전류로 구동하는 때보다 훨씬 광출력이 안정함을 실험적으로 확인하였다.

• 대한의생명과학회지
• /
• 제15권3호
• /
• pp.233-239
• /
• 2009

The aim of this study was to evaluate the photodynamic effect of various photosensitizing agents against methicillin-resistant Staphylococcus aureus (MRSA). MRSA was exposed to light from a 632 urn diode laser (15 J/$cm^2$) in the presence of various photosensitizer, such as photofrin, photogem, radachlorine and ALA. In vivo study was performed using ICR mice. Twenty eight mice had a standard wound ($100\;mm^2$) created on the dorsum, and MRSA was inoculated into the wound region. The four groups were classified as follows: (1) the untreated control group (bacteria alone), (2) the bacteria plus light group (15 J/$cm^2$), (3) the bacteria plus photofrin group (kept in the dark), and (4) the photodynamic therapy (PDT) group (bacteria, photofrin, and light). After photofrin (dose 1 mg/kg) injection, the experimental group was irradiated with 632 urn diode laser (15 J/$cm^2$) for 30 minutes after In vitro results of PDT showed the complete killing of MRSA at the photofrin, radachlorine, and photogem However, ALA-PDT was ineffective on MRSA viability. In vivo results showed that photofrin has therapeutic effect on the wound infection. These results demonstrate that selective lethal photosensitization of MRSA can be achieved using phofrin, photogem and radachlorin. Thus, PDT can inactivate MRSA survival.

• 한국광학회지
• /
• 제12권4호
• /
• pp.257-262
• /
• 2001

상용 반도체 레이저 다이오드에 Littman형 외부공진기를 결합하여 파장기변 레이저 다이오드 시스템을 제작하였다. 0차 출력광은 단일종모드로 동작하여 CFP의 분해능인 9MHz이내의 선폭을 예상할 수 있었으며 다이오드 구동전류 140mA 및 동작온도 $25^{\circ}C$의 조건하에서 거울을 수동나사로 회전시키는 성긴 튜닝(coarse tuning)시 3.475nm 의 파장가변 범위를 보였으며 PZT(piezoelectric transducer)에 200Hz의 톱니파 전압을 인가해서 거울을 회전시키는 미세튜닝(fine tuning)시 0.042nm의 범위내에서 연속적인 파장가변이 가능하였다.

• ETRI Journal
• /
• 제45권1호
• /
• pp.163-170
• /
• 2023

We report an electroabsorption modulator (EAM)-integrated distributed Bragg reflector laser diode (DBR-LD) capable of supporting a high data rate and a wide wavelength tuning. The DBR-LD contains two tuning elements, plasma and heater tunings, both of which are implemented in the DBR section, which have blue-shift and red-shift in the Bragg wavelength through a current injection, respectively. The light created from the DBR-LD is intensity-modulated through the EAM voltage, which is integrated monolithically with the DBRLD using a butt-joint coupling method. The fabricated chip shows a threshold current of approximately 8 mA, tuning range of greater than 30 nm, and static extinction ratio of higher than 20 dB while maintaining a side mode suppression ratio of greater than 40 dB under a window of 1550 nm. To evaluate its modulation properties, the chip was bonded onto a mount including a radiofrequency line and a load resistor showing clear eye openings at data rates of 25 Gb/s nonreturn-to-zero and 50 Gb/s pulse amplitude modulation 4-level, respectively.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 창립 20주년기념 특별학술발표회
• /
• pp.86-87
• /
• 2009

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.27-28
• /
• 2012

Tunable diode laser absorption spectroscopy(TDLAS) measurement techniques for several gases densities and temperatures have been applied in industrial combustion systems. Accurate measurement of temperature profile is very important, especially in power plants and heating furnaces. So profile fitting and temperature binning methods are new issue for accurate measurement of temperature in laser gas sensing. Temperature binning method is applied in this study for the measurement of temperature profile using tube furnace with three temperature zones. In this study the temperature profiles of tube furnace is accurately measured within 5% error, and this technique is proved to be very promising in the field of temperature profile measurement.