• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.222-223
• /
• 2000

지금까지 gold-coated 반사체, cusp-shaped 반사체, 복합 포물 반사체(CPC), 난반사 공동체 등 다양한 형태의 반사체가 횡펌핑을 이용한 Nd:YAG 레이저의 개발을 위하여 고안되어졌다. 횡여기되는 Nd:YAG 레이저의 광학적 효율은 반사체의 형태, 다이오드 레이저의 파장, Nd:YAG 결정의 지름, Nd$^3$의 도핑농도에 따라 영향을 받는다.$^{(1)}$ 본 연구에서는 고출력의 횡여기 Nd:YAG 레이저를 개발할 목적으로 광여기 공동으로 사용된 난반사 공동체의 내부지름과 레이저 매질인 Nd:YAG 결정의 흡수계수 등 매개변수를 변화시켜 흡수분포와 출력을 계산하였으며, 이러한 매개변수들이 기울기 효율에 미치는 영향을 수치 해석적으로 연구해 보았다. 광선추적법에서 사용한 매개변수 중에서 다이오드 레이저의 파장은 808 nm이고, 반사율은 90%이며, 여기 다이오드 출력은 1080 W이다. 난반사 공동체$^{(2)}$ 의 반사율은 95.7%이고, 결정의 투과율은 90%이며, 결정의 반지름은 2.5 mm이다. 사용된 여기 구조도는 그림 1과 같다. 여기헤드는 Nd:YAG 결정, 난반사 공동체, 그리고 3개의 360 W급 다이오드 어레이들로 구성되어 있다. (중략)

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.207-212
• /
• 1999

Undoped InP epilayers with high purity were grown by using $In/PCl_3/H_2$ chloride vapor phase epitaxy. It was found that the growth of InP homoepitaxial layer is optimized at the growth temperature of $630^{\circ}C$ and at the $PCl_3$ molar fraction of $1.2\times10^{-2}$. The carrier concentration of InP epilayer was less than $10^{14} {cm}^{-3}$ from the low temperature (11K) photoluminescence measurement. Growth behavior of undoped InP current blocking layer on reactive ion-etched (RIE) mesas has been investigated for the realization of 1.55 $\mu \textrm m$buried-heterostructure laser diode (BH LD), using chloride vapor phase epitaxy. On the base of InP homoepitaxy, InP current blocking layers were grown at the growth temperatures ranging from $620^{\circ}C$ to $640^{\circ}C$. Almost planar grown surfaces without edge overgrowth were achieved as the growth temperature increased. It implied that higher temperature enhanced the surface diffusion of the growth species on the {111} B planes and suppressed edge overgrowth.

• Membrane Journal
• /
• v.13 no.3
• /
• pp.154-161
• /
• 2003

We measured the permeation characteristics of water with the hydrophobic PTFE membranes dependent on water temperature to confirm the separation of oxygen isotopes using Air Gap Membrane Distillation (AGMD) and Vacuum Enhanced Membrane Distillation (VEMD). Isotopic concentrations of $H_2^{16}O$ and $H_2^{18}O$ of the permeated water vapor were measured by Diode Laser Absorption Spectroscopy. Concentrations of the heavy oxygen isotopes in the permeated water vapor were decreased. Isotope separation coefficients for the hydrophobic PTFE membranes were 1.004∼1.01 depending on the experimental conditions. We observed the effects of air in membrane pores on the oxygen isotope separation. Isotope separation coefficients for the hydrophobic PTFE membranes without air in pores are higher than those for the membrane with air in pores.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.13-20
• /
• 2006

In this paper, we propose novel optics design for media inside near-field recording(NFR) using hemispherical solid immersion lens(HMS). To obtain strong advantage of data protection and high data capacity simultaneously, HMS based near field optics using aplanatic position of super hemisphere is designed. In this design, to improve small optical tolerance of this aplanatic position, additional aspheric lens surface is added on top of the HMS and it is combined with zoom optics which composed of two single lenses having low numerical aperture(NA). Also, to compensate chromatic aberration which happens seriously in optics using blue laser diode, diffractive optical element is used. Using zoom optics, additional aspheric lens surface, and diffractive optical element together, wavefront aberration and chromatic aberration are effectively reduced in broad range of cover layer thickness and wavelength variation. In addition, in this paper, effect of gap induced aberration is investigated by analyzing different behavior of each TM and TE wave for designed media inside dual-layer NFR optics.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.51-56
• /
• 2019

LuAG:Ce(Lu₃Al₅O₁₂:Ce³⁺) nano phosphor were synthesized by applying the coprecipitation method. It is used to increase the color rendering of phosphor ceramic plate for high power LEDs and laser lighting. Internal quantum efficiency and absorption of LuAG:Ce nano phosphor are 51.5 % and 64.4 %, respectively, which is higher than the previously studied nano phosphors. The maximum absorption wavelength of this phosphor is 450 nm blue light, and the emission wavelength is 510 nm. The emission wavelength shifted to longer wavelength when the concentration of Ce increased in the heat treatment of the reducing atmosphere. Thermal quenching of LuAG nano phosphor was 70 % at 200 ℃, it was explained by their significant quenching of all raman scattering modes, implying the restriction of electron-phonon couplings caused by their defects.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.2
• /
• pp.204-210
• /
• 2021

In this paper, we studied a method of wirelessly checking up the POD for captive flight tests which is performed during the development of guided weapons systems. The wireless power transfer module, the power distribution device, and the battery pack were designed to wirelessly power the captive flight test POD, and the communication device was designed to enable wireless communication between the POD and the check-up device. The communication device was designed to enable WiFi, IR communication, and laser diode communication, so that various communication methods could be tested. Through the performance test, it was confirmed that power was stably supplied to the captive flight test POD, and the wireless communication performance was verified by measuring the delay time and error rate. As a result, by using our system the POD check-up for the captive flight test was performed wirelessly and the data of the captive equipment could be obtained effectively.

• Medical Lasers
• /
• v.10 no.3
• /
• pp.123-131
• /
• 2021

Optical imaging modalities with properties of real-time, non-invasive, in vivo, and high resolution for image-guided surgery have been widely studied. In this review, we introduce two optical imaging systems, that could be the core of image-guided surgery and introduce the system configuration, implementation, and operation methods. First, we introduce the optical coherence tomography (OCT) system implemented by our research group. This system is implemented based on a swept-source, and the system has an axial resolution of 11 ㎛ and a lateral resolution of 22 ㎛. Second, we introduce a fluorescence imaging system. The fluorescence imaging system was implemented based on the absorption and fluorescence wavelength of indocyanine green (ICG), with a light-emitting diode (LED) light source. To confirm the performance of the two imaging systems, human malignant melanoma cells were injected into BALB/c nude mice to create a xenograft model and using this, OCT images of cancer and pathological slide images were compared. In addition, in a mouse model, an intravenous injection of indocyanine green was used with a fluorescence imaging system to detect real-time images moving along blood vessels and to detect sentinel lymph nodes, which could be very important for cancer staging. Finally, polarization-sensitive OCT to find the boundaries of cancer in real-time and real-time image-guided surgery using a developed contrast agent and fluorescence imaging system were introduced.

• Tribology and Lubricants
• /
• v.39 no.2
• /
• pp.56-60
• /
• 2023

In this study, we evaluate the anisotropic flow of droplets according to the directionality of asperities. We manufacture a mold with an inclined hole by adjusting the jig angle using a high-power diode laser. Using the manufactured mold, we prepare specimens for wettability studies by the micro molding technique. We fabricate twelve kinds of surfaces with micro-asperities inclined at 0°, 15°, 30°, and 45° for asperity pitches of 100 ㎛, 200 ㎛, and 300 ㎛. We evaluate the static and dynamic behaviors of the droplets as a function of the asperities pitch and inclination angles. The anisotropic effect increases as the pitch increases between asperities, and the anisotropic flow characteristics increase as the inclination angle of the asperities increases. On the surface with hole pitches of 100 ㎛ and 200 ㎛, the contact angle of the droplet shows high hydrophobicity at approximately 160°, but on the surface with the 300-㎛ hole pitch, the contact angle is approximately 110°, indicating that the hydrophobic effect rapidly reduces. Additionally, when the inclination angle of the asperities is approximately 30°, the left and right contact angle deviations of the droplet are the lowest, showing that the roll-off angle is relatively low.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.539-541
• /
• 2022

Photodynamic therapy is one of the ways to treat cancer using light and during laser irradiation, photosensitizers react and combine with oxygen to destroy cancer cells. This treatment is in the spotlight as a treatment that minimizes side effects in cancer patients. Among them, photosensitizers differ in the treatment area, treatment effect, and degree of absorption depending on the type. Therefore, in this study, a quantitative evaluation study was conducted on the effect of inhibiting cancer cell proliferation by irradiating blue LEDs on HELA cell lines injected with 5-ALA among photosensitizers.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.32-39
• /
• 2024

This study evaluated the additive impact of ethylenediamine tetraacetic acid (EDTA) on erythrosine-mediated photodynamic therapy (PDT) against Streptococcus mutans (S. mutans) biofilm by measuring colony-forming units and applying confocal laser scanning microscopy. Fifty-six bovine incisors, free from dental caries or structural defects, were utilized in this study. Dentin specimens were created by cutting with a low-speed diamond disk under a continuous flow of water, resulting in dimensions of 6.0 mm × 3.0 mm × 2.0 mm. The specimens were categorized into 4 groups: Control, EDTA, PDT, and EDTA + PDT. S. mutans ATCC 25175 was employed to establish biofilm on the dentin specimens. A 17% EDTA solution was applied for 1 min. For PDT, erythrosine served as the photosensitizer. Finally, a light-emitting diode source (385 - 515 nm) was employed in this study. The PDT group exhibited a significantly lower bacterial count than both the control and EDTA groups (p < 0.001). The EDTA + PDT group demonstrated a significantly reduced bacterial count compared to the other 3 groups (p < 0.001). This study demonstrated that EDTA enhances the antimicrobial efficacy of PDT on S. mutans biofilm. Even at a low concentration of photosensitizer, the combination of EDTA and PDT yields a significant antibacterial effect.