• Nuclear Engineering and Technology
• /
• 제28권1호
• /
• pp.27-35
• /
• 1996

본 논문에서는, 가압경수로 발전소의 가압기 밀림관내 비정상상태의 열성층현상에 대한 계산 모델을 제안하여 배관내의 온도분포, 유동특성 및 열응력에 대해 연구하였다. 경계면이 시간에 따라 변화가 없거나 정상상태에서 개발된 다른 모델과는 달리 본 모델에서는 고온 및 저온유체 사이의 경계면을 시간의 함수로 가정하였다. 열성층현상에 대한 무차원지배방정식은 SIMPLE 알고리즘을 사용하여 해를 구하였다. 본 수치계산의 결과는 주어진 조건하에서 무차원시간이 약 27.0 일 때 배관의 고온부 및 저온부사이의 최대무차원온도차는 0.78정도이었고, 이때의 열성층 현상에 의한 최대 열응력은 276 MPa로 계산되었다.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.513-543
• /
• 2016

Third order shear deformation theory is used to evaluate electro-elastic solution of a sandwich plate with considering functionally graded (FG) core and composite face sheets made of piezoelectric layers. The plate is resting on the Pasternak foundation and subjected to normal pressure. Short circuited condition is applied on the top and bottom of piezoelectric layers. The governing differential equations of the system can be derived using Hamilton's principle and Maxwell's equation. The Navier's type solution for a sandwich rectangular thick plate with all edges simply supported is used. The numerical results are presented in terms of varying the parameters of the problem such as two elastic foundation parameters, thickness ratio ($h_p/2h$), and power law index on the dimensionless deflection, critical buckling load, electric potential function, and the natural frequency of sandwich rectangular thick plate. The results show that the dimensionless natural frequency and critical buckling load diminish with an increase in the power law index, and vice versa for dimensionless deflection and electrical potential function, because of the sandwich thick plate with considering FG core becomes more flexible; while these results are reverse for thickness ratio.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.35-44
• /
• 1997

Critical too-Phase flow rates of subcooled water through Short Pipes (L 140039n) with small diameters (D$\leq$7.15 min) have been experimentally investigated for wide ranges of subcooling (0~199$^{\circ}C$) and pressure (0.5~2.0 MPa). To examine the effects of various parameters (i.e., the location of flashing inception, the degree of subcooling, the stagnation temperature and pressure, and the pipe size) on the critical two-phase flow rates of subcooled water through short pipes with small diameters, a total of 135 runs were made for various combinations of test parameters using four different L/D test sections. Experimental results that show effect of various parameters on subcooled critical two phase flow rates are presented in the form of graphs such as the dimensionless mass flux ( $G^{*}$) versus the dimensionless subcooling ( $T_{sub}$$^{*}$) curve. An empirical correlation expressed in terms of a dimensionless subcooling is also obtained for subcooled two-phase flow rates through present test sections. Comparisons between the mass fluxes calculated by present correlation and a total of 755 selected experimental data points of 9 different investigators show that the agreement is fairly good except for very low subcooling data obtained from small L/D (less than 10) orifices.s.s.s.

• 한국수자원학회논문집
• /
• 제36권1호
• /
• pp.33-44
• /
• 2003

유황곡선은 하천유량의 변동성을 함축적으로 나타내고 있다. 본 연구는 인위적인 유량조절이 없는 자연하천의 무차원 유황곡선을 조사하여 보았다. 유황분석은 IHP대표유역과 대하천 주요 수위관측 지점의 수문자료를 토대로 수행하였다. 유황은 유역면적에 의존하나 유황계수는 판수계수를 제외하면 유역면적의 변화에 민감하지 않았으며 특히 풍수계수는 일정한 값을 나타내었다. 본 연구에서 평수량에 대한 갈수량 및 저수량의 비로 정의한 유황변동계수는 유역면적이 증가하면 작아지고 하천 경사의 증가에 따라 커진다. 저수유황변동에 비하여 갈수유황 변동이 유역면적의 변화에 영향을 받는 것으로 보여진다.

• Structural Engineering and Mechanics
• /
• 제78권1호
• /
• pp.31-39
• /
• 2021

To investigate numerically the effect of all parameters on the outcome of an aircraft impact into robust engineering structures like nuclear power plant containments is a tedious task. In order to reduce the problem to a manageable size, we propose a single dimensionless parameter, the damage potential, to characterize the main features of the impact. The damage potential, which is the ratio of the initial kinetic energy of the aircraft to the work required to crush it, enables us to find the crucial parameter settings that need to be modelled numerically in detail. We show in this paper that the damage potential is indeed the most important parameter of the impact that determines the time-dependent reaction force when either finite element (FE) modelling or the Riera model is applied. We find that parameters that do not alter the damage potential, like elasticity of the target, are of secondary importance and if parameters are altered in a way that the damage potential remains the same then the course of the impact remains similar. We show, however, that the maximum value of the reaction force can be higher in case of elastic targets than in case of rigid targets due to the vibration of the target. The difference between the Riera and FE model results is also found to depend on the damage potential.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3754-3767
• /
• 2023

Turbulent jet discharges in subcooled water pools are essential for safety systems in nuclear power plants, specifically in the pressure suppression pool of boiling water reactors and In-containment Refueling Water Storage Tank of advanced pressurized water reactors. The gas and liquid flow in these systems is investigated using multiphase flow analysis. This field has been extensively examined using a combination of experiments, theoretical models, and Computational Fluid Dynamics (CFD) simulations. ANSYS CFX offers two approaches to model multiphase flow behavior. The non-homogeneous Eulerian-Eulerian Model has been used in this work; it computes global information and is more convenient to study interpenetrated fluids. This study utilized the Large Eddy Simulation Model as the turbulence model, as it is better suited for non-stationary and buoyant flows. The CFD results of this study were validated with experimental data and theoretical results previously obtained. The figures of merit dimensionless penetration length and the dimensionless buoyancy length show good agreement with the experimental measurements. Correlations for these variables were obtained as a function of dimensionless numbers to give generality using only initial boundary conditions. CFD numerical model developed in this research has the capability to simulate the behavior of non-condensable gases discharged in water.

• 한국수자원학회논문집
• /
• 제51권8호
• /
• pp.729-737
• /
• 2018

본 연구에서는 실내실험을 통하여 개량형 공압식 가동보를 대상으로 수로경사 변화를 고려한 유사의 수리학적 발달 과정을 분석하였다. 분석결과 보에 의하여 형성된 델타는 시간이 증가함에 따라 하류로 이동하며, 델타높이($h_d$)는 증가하였다. 또한 보에 도달 할수록 흐름이 약해지면서 델타의 이동속도($S_D$)는 감소하였다. 무차원 델타 위치($x_D/x$)가 증가할수록 무차원 델타의 유효높이($h_d/h_w$)와 무차원 저수지 용량($V_{xD}/V_x$)이 증가였다. 따라서 동일한 조건에서 수로경사(i)가 완만할수록 델타의 퇴적량($Q_s$)이 감소하게 되며, 델타의 체적($V_{xD}$) 발달에 큰 영향을 미치는 것으로 나타났다. 통수 초기 델타의 전면경사가 완만하며, 델타가 하류로 이동할수록 델타의 전면경사는 증가하였다. 또한 수로경사(i)가 완만할수록 델타의 전면부 길이 비($h_d/{\Delta}S$)는 1에 가까워지고, 무차원 델타의 높이($h_d/h$)와 무차원 델타의 이동속도($S_D/V_0$)가 감소하였다. 델타의 높이($h_d$)가 증가할수록 수심(h)은 감소하였으며, 보에 접근하는 유속($V_0$)과 델타의 이동속도($S_D$)도 감소하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.165-169
• /
• 2007

In this study, the factors that have strong relationship with size effects on forging simulation are investigated and then a dimensionless concept is implemented into the forging simulator. The approach is applied to simulating a micro former forging process of which sequence involves a piercing process to make a hole of 0.7mm diameter of the product whose maximum diameter is 3mm. The simulated results are discussed to reveal the size effect in forging simulation.

• 설비공학논문집
• /
• 제3권2호
• /
• pp.123-130
• /
• 1991

The mixed convection heat transfer from vertical inline plates has been studied numerically by the finite difference method and experimentally with Mach-Zehnder interferometer. The dimensionless spacing, $s/L_1$, the relative length, $L_2/L_1$ and the dimensionless temperature ratio, ${\Phi}_2/{\Phi}_1$ are varied parametically. The lower plate mean Nusselt numbers show same values as $s/L_1$, ${\Phi}_2/{\Phi}_1$ and $L_2/L_1$ increase. The upper plate mean Nusselt numbers increase as $s/L_1$ and ${\Phi}_2/{\Phi}_1$ increase, but $L_2/L_1$ decreases. The upper plate mean Nusselt number is higher than the lower plate mean Nusselt for $s/L_1$ 1.8 at Re=100, $Gr=10^4$, Pr=0.71, $L_2/L_1=0.5$ and ${\Phi}_2/{\Phi}_1=1.0$. A comparison between the experimental and numerical results show good agreement.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.546-552
• /
• 2001

The heat transfer and flow measurements on a pedestal encountered in chip cooling. A uniform wall temperature boundary condition at the plate surface and on a pedestal was created using shroud method. Liquid crystal was used to measure the plate surface temperature. The jet Reynolds number (Re) ranges from 11,000 to 50,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, and the dimensionless pedestal diameter-to-height (H/D) from 0 to 1.0. The results show that the Nusselt number distributions at the near the pedestal exhibit secondary maxima at $r/d{\cong}1.0\;and\;1.5$. The formation of the secondary maxima is attributed to an create in the vortex by the pedestal.