• 토지주택연구
• /
• 제5권3호
• /
• pp.203-214
• /
• 2014

The purpose of this paper is to introduce two integrated urban development projects in Japan that take full advantage of flood-control reservoirs: the Tetsugakudo Park Collective Housing Development Project and the Koshigaya Lake Town Project. The former project - implemented cooperatively by the Tokyo metropolitan government in charge of river management, Shinjuku and Nakano wards (in Tokyo) responsible for park management, and the Urban Renaissance Agency, a housing project developer - set a significant precedent for three-dimensional river use by realizing the three-dimensional integrated development of a flood control reservoir, a park, and collective housing. The Koshigaya Lake Town Project, launched as a drastic storm water management measure for a low-lying area often plagued by flooding, has achieved a sustainable coexistence between the waterfront environment and the urban living environment, with an artificial flood-control reservoir as the core for urban development. This project is fully committed to environmental coexistence through the optimal use of local environmental resources, with the cooperation of the central government, Saitama Prefecture and Koshigaya City.

• 항공우주시스템공학회지
• /
• 제5권1호
• /
• pp.1-6
• /
• 2011

It is very important to correctly set control surface linkage. But a lot of bad setting case has been seen in especially remote controled airplanes and middle size UAVs. In this paper, a three dimensional linkage from control surface to deflection sensor was analyzed kinematically and a position analysis was simulated using algebraic algorithm in terms of nonlinear error of deflection angle. Three correct settings of the linkage came out of this research. One is two-dimensional motion, another is link ratio of 1 and the other is that effective lever of the control surface should be perpendicular to a pushrod in their neutral position.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권12호
• /
• pp.591-596
• /
• 2002

This Paper Presents a new methodology for Direct Load Control(DLC) and Unit Commitment. To consider economical effect of DLC, we developed 3-Dimensional dynamic programming which can combine unit commitment and DLC. Traditional dynamic programming has 2-Dimensional which consist of state and stage, but newly developed dynamic programming has DLC state, U.C. state, and stage. As a result, economical DLC and unit commitment schedule of the power system is possible. This method is applied to the test system, and the usefulness of the method is verified.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.506-515
• /
• 1999

Dental practice can produce and spread some infectious diseases from patients to dentist, dental assistant, and dental labors. One possible method for preventing these cross-contamination is to immerse dental impression in chemical disinfectants. So for many investigators studied on the dimensional changes of dental impressions and on the surface qualities of stone casts made from impression following immersion in disinfectants. This study was proposed to evaluate some popular impression disinfectant combination from the point of dimensional stability. Impression was taken from dental arch-shaped metal model. Irreversible hydrocolloid and 3 elastomers(polyvinyl siloxane, polysulfide, polyether) were immersed in 3 disinfectants (2% glutaraldehyde, 1% povidone-iodine, 0.5% sodium hypochlorite) for 10 minutes and measured both cross-arch and anterior-posterior distance under stereo microscope to evaluate dimensional change. The results obtained were as follows: 1. Dimensional changes of irreversible hydrocolloid impression was statistically different in cross-arch and anterior-posterior distance when immersed in 2% glutaraldehyde solution and in anterior-posterior distance when immersed in 0.5% sodium hypochlorite solution from control group (p<0.05). 2. Dimensional changes of polyvinyl siloxane and polysulfide impression were not statistically different from control group (p>0.05). 3. Dimensional changes of polyether impression was statistically different in cross-arch distance when immersed in 0.5% sodium hypochlorite solution and in anterior-posterior distance when immersed in 1% povidone-iodine solution from control group (p<0.05). 4. In all cases, dimensional changes were less than 0.1% from the original dimension and concluded clinically acceptable.

• 제어로봇시스템학회논문지
• /
• 제6권5호
• /
• pp.376-382
• /
• 2000

A problem of relevant interest to some industries is that of the optimum two-dimensional layout. In this problem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the shapes out of the sheets in such a way as to minimize the amount of waste produced. In this paper, we propose a genetic algorithms using rotation parameters by which the best pattern of layout is found.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.290-292
• /
• 1993

In this paper, analysis of the noise induced by rotating machines and the mode analysis of a 3-dimensional enclosure are presented. Adaptive active noise control algorithms for the multi-channel case are proposed. Computer simulations were done to show usefulness of the designed algorithm in a 3-dimensional enclosure case.

• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.787-800
• /
• 2000

In this paper we consider an optimal control system described by n-dimensional heat equation with a thermal source. Thus problem is to find an optimal control which puts the system in a finite time T, into a stationary regime and to minimize a general objective function. Here we assume there is no constraints on control. This problem is reduced to a moment problem. We modify the moment problem into one consisting of the minimization of a positive linear functional over a set of Radon measures and we show that there is an optimal measure corresponding to the optimal control. The above optimal measure approximated by a finite combination of atomic measures. This construction gives rise to a finite dimensional linear programming problem, where its solution can be used to determine the optimal combination of atomic measures. Then by using the solution of the above linear programming problem we find a piecewise-constant optimal control function which is an approximate control for the original optimal control problem. Finally we obtain piecewise-constant optimal control for two examples of heat equations with a thermal source in one-dimensional.

• 유통과학연구
• /
• 제17권9호
• /
• pp.67-81
• /
• 2019

Purpose - The overarching aim of this study is to empirically test the effect of ex-post control mechanisms on multi-dimensional trust and channel performance in franchise systems. Although the franchise system is a vertical marketing channel based on trust between the franchisor and the franchisees, issues related to franchisee's opportunistic behavior have persisted and thus requires research into the effective control system of franchise headquarters. Research design, data, and methodology - In this study, data was collected from 150 franchises to identify the effect of two types of franchising headquarters' control system on the multi-dimensional trust and franchise channel outcome between franchisor and franchisee. To test the hypotheses intended to achieve this aim, structural equations modeling technique is utilized. Results - The results of this research reveal that among the two formal control systems studied (output and process control), output control positively and significantly affects multidimensional trust. Additionally, among the three dimensions of trust employed in this study, only expertise has a positive and significant effect on contract compliance. Equally, only expertise and integrity have a negative and significant effect on opportunistic behavior. Conclusions - The study provides managerial and theoretical insights into understanding ex-post control mechanisms, trust, compliance and opportunistic behaviors in franchise systems.

• 대한전기학회논문지
• /
• 제37권6호
• /
• pp.414-421
• /
• 1988

This paper is concerned with a design procedure for constructing finite dimensional compensators for a class of infinite dimensional aystems. Basically, this procedure consists of decomposing the state space of the basis of its modes and utilizing well-known finite dimensional algorithms for constructing observers and state feedback control laws. The finite dimensional observer dynamics is modified to account for the effect of the residual modes so as to achieve the stabelity of the closed loop system asymptotically.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1170-1174
• /
• 2014

This paper suggests using the ICP (Iterative Closet Point) algorithm to compensate a two-dimensional map. ICP algorithm is a typical algorithm method using matching distance data. When building a two-dimensional map, using data through the value of a laser scanner, it occurred warping and distortion of a two-dimensional map because of the difference of distance from the value of the sensor. It uses the ICP algorithm in order to reduce any error of line. It validated the proposed method through experiment involving matching a two-dimensional map based reference data and measured the two-dimensional map.