• Journal of The Korean Astronomical Society
• /
• v.56 no.2
• /
• pp.137-147
• /
• 2023

Shoushili was the official calendrical method promulgated in 1280 CE by the Yuan dynasty. It contains a list of the angular spans in right ascensions for the 28 lunar lodges. They are known to have been measured by Guo Shoujing with his advanced instruments with an unprecedented precision or reading error of 5'. Such precise data are useful to determine their observational epoch with an error range which is narrow enough to pinpoint on which historical occasion they were observed. Using the precise SIMBAD data based on eDR3 of GAIA and carefully identified determinative stars and considering the precession of equinoxes and proper motions, we apply linear regression methods to those data and obtain the observational epoch of 1271 ± 16 CE and the measurement error of 4.1'. We also have polar distances corresponding to declinations written in another manuscript of the Ming dynasty. Since the two data sets have similar significant digits, they were suggested to have the same origin. However, we obtain their observational epoch of 1364±5 CE and the measurement error of 5.7'. They must have been measured with different instruments and on a different occasion from the observations related to Shoushili. We review the history of the calendrical reform during the 13th century in the Yuan dynasty. We conclude that the observational epoch obtained from lodge spans in Shoushili agrees with the period of observations led by Guo Shoujing or 1276-1279 CE, which is also supported by the fact that the ecliptic lodge span values listed in Shoushili were calculated from the equatorial lodge spans.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.130.1-130.1
• /
• 2010

미국과 유럽에서는 이미 10여 년 전부터 250MW급 이상의 대용량 석탄IGCC 플랜트를 상업운전 하고 있으며, 일본과 중국을 비롯한 아시아에서도 대용량 플랜트를 시운전하고 있거나 건설 중에 있다. 한국에서는 제4차 전력수급계획에 의거 태안화력 부지 내에 300MW급 IGCC 플랜트 건설을 추진 중이며, 두산중공업은 '10년 상반기에 IGCC 가스화 플랜트에 대한 FEED 설계 (Front-Eng Engineering Design)를 완료하였다. 그 과정 중 설계조건에 의한 기본 엔지니어링 사항과 석탄 가스화 플랜트에 대한 성능예측 결과를 본 연구에서 소개한다. 가스화 플랜트의 엔지니어링은 가스화 블록과 가스정제 블록으로 구분하여 수행하였다. Process Data를 이용하여 PFD Development, P&ID Generation, Equipment Specification 개발, HAZOP 수행, Architecture Engineering 등의 순으로 FEED 설계를 진행하였다. BOD (Basis of Design)를 기준으로 운전조건별 Heat & Mass Balance와 Process Flow를 재검토하고 각 기기별 운전개념을 반영하여 P&ID를 개발하였다. 그리고 배관, 전기 및 제어에 대한 각종 Diagram 개발과 HSE (Health, Safety and Environment) 관련 설계를 수행하였다. IGCC 1호기의 엔지니어링 수행과 함께 Next 호기 자체설계 역량 확보를 위해 두산중공업은 'DIGITs'로 명명된 개념기본설계 Tool을 개발하고 있다. DIGITs는 공정모델링, 단위기기 개념설계, 공정구성 (Process Configuration) 및 종합 Database Package 형태로 구성된다. DIGITs에 의한 계산 결과 공정사 Process Data 기준시 가스화 블록 출구에서 Syngas HHV와 Syngas 현열은 각각 약 $636MW_{th}$와 약 $18MW_{th}$로, Plant 설계조건 $630MW_{th}$를 만족하는 것으로 예측되었다. 향후 DIGITs는 가스정제 블록 및 주변 BOP 설비 등과 연계한 종합 개념기본설계 Tool로써 개발 진행 중이다.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.684-691
• /
• 2006

As many functionalities such as cameras and MP3 players are converged to mobile phones, more intuitive and interesting interaction methods are essential. In this paper, we present applications and their enabling technologies for gesture interactive cell phones. They employ gesture recognition and real-time shake detection algorithm for supporting motion-based user interface and entertainment applications respectively. The gesture recognition algorithm classifies users' movement into one of predefined gestures by modeling basic components of acceleration signals and their relationships. The recognition performance is further enhanced by discriminating frequently confusing classes with support vector machines. The shake detection algorithm detects in real time the exact motion moment when the phone is shaken significantly by utilizing variance and mean of acceleration signals. The gesture interaction algorithms show reliable performance for commercialization; with 100 novice users, the average recognition rate was 96.9% on 11 gestures (digits 1-9, O, X) and users' movements were detected in real time. We have applied the motion understanding technologies to Samsung cell phones in Korean, American, Chinese and European markets since May 2005.

• Archives of Plastic Surgery
• /
• v.46 no.6
• /
• pp.580-588
• /
• 2019

Background There are various reconstructive options for nail bed defects. However, it is challenging not to leave a deformity. In this study, we investigated differences in outcomes depending on the reconstruction method, attempted to determine which method was better, and analyzed other factors that may affect outcomes. Methods The long-term outcomes of nail bed reconstruction were reviewed retrospectively. We performed three types of reconstruction depending on the defect type: composite grafts of severed segments, nail bed grafts from the big toe, and two-stage surgery (flap coverage first, followed by a nail bed graft). Subsequent nail growth was evaluated during follow-up, and each outcome was graded based on Zook's criteria. The reconstruction methods were statistically analyzed. Other factors that could contribute to the outcomes, including age, the timing of surgery, germinal matrix involvement, defect size, and the presence of bone injuries, were also compared. Results Twenty-one patients (22 digits) who underwent nail bed reconstruction were evaluated. The type of reconstruction method did not show a significant relationship with the outcomes. However, patients who sustained injuries in the germinal matrix and patients with a defect larger than half the size of the nail bed had significantly worse outcomes than the comparison groups. Conclusions The results suggest that no operative method was superior to another in terms of the outcomes of nail bed reconstruction. Nevertheless, involvement of the germinal matrix and defect size affected the outcomes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3865-3869
• /
• 2013

Background: Cigarette per day (CPD) use is a key smoking behaviour indicator. It reflects smoking intensity which is directly proportional to the occurrence of tobacco induced cancers. Self reported CPD assessment in surveys may suffer from digit bias and under reporting. Estimates from such surveys could influence the policy decision for tobacco control efforts. In this context, this study aimed at identifying underlying factors of digit bias and its implications for Global Adult Tobacco Surveillance. Materials or Methods: Daily manufactured cigarette users CPD frequencies from Global Adult Tobacco Survey (GATS) - India data were analyzed. Adapted Whipple Index was estimated to assess digit bias and data quality of reported CPD frequency. Digit bias was quantified by considering reporting of '0' or '5' as the terminal digits in the CPD frequency. The factors influencing it were identified by bivariate and logistic regression analysis. Results: The mean and mode of CPD frequency was 6.7 and 10 respectively. Around 14.5%, 15.1% and 15.2% of daily smokers had reported their CPD frequency as 2, 5 and 10 respectively. Modified Whipple index was estimated to be 226.3 indicating poor data quality. Digit bias was observed in 38% of the daily smokers. Heavy smoking, urban residence, North, South, North- East region of India, less than primary, secondary or higher educated and fourth asset index quintile group were significantly associated with digit bias. Discussion: The present study highlighted poor quality of CPD frequency data in the GATS-India survey and need for its improvement. Modeling of digit preference and smoothing of the CPD frequency data is required to improve quality of data. Marketing of 10 cigarette sticks per pack may influence CPD frequency reporting, but this needs further examination. Exploring alternative methods to reduce digit bias in cross sectional surveys should be given priority.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.89-94
• /
• 2009

This paper proposes the algorithms that design the highly digital logic circuit and assign the code to each node of DCG(Directed Cyclic Graph) of length ${\zeta}$. The conventional algorithm have some problems, so this paper introduce the matrix equation from DCG of length ${\zeta}$ and proposes highly digital logic circuit design algorithms according to the DCG of length ${\zeta}$. Using the proposed circuit design algorithms in this paper, it become realized that was able to design from former algorithm. Also, making a comparison between the circuit using former algorithm and this paper's, we testify that proposed paper's algorithm is able to realize more optimized circuit design. According to proposed circuit design algorithm in this paper, it is possible to design current that DCG have natural number, so it have the following advantages, reduction of the circuit input/output digits, simplification of circuit composition, reduction of computation time and cost. And we show comparability and verification about this paper's algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.355-360
• /
• 2015

In this paper, we propose the design of Radial Basis Function Neural Network based on PCA in order to recognize handwritten digits. The proposed pattern classifier consists of the preprocessing step of PCA and the pattern classification step of pRBFNNs. In the preprocessing step, Feature data is obtained through preprocessing step of PCA for minimizing the information loss of given data and then this data is used as input data to pRBFNNs. The hidden layer of the proposed classifier is built up by Fuzzy C-Means(FCM) clustering algorithm and the connection weights are defined as linear polynomial function. In the output layer, polynomial parameters are obtained by using Least Square Estimation (LSE). MNIST database known as one of the benchmark handwritten dataset is applied for the performance evaluation of the proposed classifier. The experimental results of the proposed system are compared with other existing classifiers.

• Archives of Plastic Surgery
• /
• v.43 no.6
• /
• pp.551-558
• /
• 2016

Background Fascial free flaps have been widely used for reconstruction of the hand because they are thin. However, studies reporting objective data regarding the advantages of this approach are lacking. Thus, we report our experience with such flaps. Methods Forty-five cases of fascial free flaps between November 2006 and March 2014 were reviewed. Nine cases involving reconstructed dorsal or lateral defects were included. Four anterolateral thigh fascial free flaps and 5 lateral arm fascial free flaps were examined. Maximal flap contour was assessed by measuring reconstructed tissue thickness at the central area from the surface of the skin to below the bone in a vertical manner using ultrasonography and X-ray data. Contralateral regions were examined in the same manner and a comparative analysis was performed. A questionnaire survey regarding aesthetic satisfaction was also administered. Results All reconstructed parts had a thicker contour than the contralateral side. The average relative percentage of reconstructed tissue thickness was found to be 152% using ultrasonography and 143% using X-ray imaging. According to the aesthetic satisfaction survey, the average rate of satisfaction for patients was 62%, and satisfaction with the flap contour was 72%. Conclusions Using a fascial free flap, the reconstructed tissue was approximately $1.5{\times}$ as thick as the contour of the normal side, which led to positive responses regarding aesthetic satisfaction.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.5
• /
• pp.1011-1019
• /
• 2015

CAPTCHA(Completely Automated Public Turing test to tell Computers and Humans Apart) is a test used in computing to distinguish whether or not the user is computer or human. Many web sites mostly use the character-based CAPTCHA consisting of digits and characters. Recently, with the development of OCR technology, simple character-based CAPTCHA are broken quite easily. As an alternative, many web sites add noise to make it harder for recognition. In this paper, we analyzed the most recent CAPTCHA, which incorporates the addition of the natural images to obfuscate the characters. We proposed an efficient method using support vector machine to separate the characters from the background image and use convolutional neural network to recognize each characters. As a result, 368 out of 1000 CAPTCHAs were correctly identified, it was demonstrated that the current CAPTCHA is not safe.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1093-1100
• /
• 2015

Since the security of RSA cryptosystem depends on the difficulty of factoring integers, it is the most important problem to factor large integers in RSA cryptosystem. The Lenstra elliptic curve factorization method(ECM) is considered a special purpose factoring algorithm as it is still the best algorithm for divisors not greatly exceeding 20 to 25 digits(64 to 83 bits or so). ECM, however, wastes most time to calculate $M{\cdot}P$ mod N and so Montgomery and Koyama both give fast methods for implementing $M{\cdot}P$ mod N. We, in this paper, further analyze Montgomery and Koyama's methods and propose an efficient algorithm which choose the optimal parameters and reduces the number of multiplications of Montgomery and Koyama's methods. Consequently, the run time of our algorithm is reduced by 20% or so than that of Montgomery and Koyama's methods.