• Electronics and Telecommunications Trends
• /
• v.11 no.4 s.42
• /
• pp.13-25
• /
• 1996

본 고에서는 ADSL(Asymmetric Digital Subscriber Lines) 서비스를 DMT(Digital Multichannel Transmitter) 시스템 모델에 관하여 고찰한다. CSA(Carrier Service Area) 구역에서 6Mb/s급의 다중반송파변조방식(multi-carrier modulation)을 전송방식으로 하는 ADSL-3급 서비스가 가능한 가입자 루프 및 전송신호 특성을 고려한 설계 요구 조건을 살펴보고, 이를 만족하는 DMT ADSL 시스템 모델, 등화기 구조 및 DMT ADSL시스템의 성능예측방법을 고찰함으로써 보다 나은 성능의 ADSL시스템 구현을 위한 설계방향을 제시하고자 한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.313-321
• /
• 2014

A low-power low-cost polar transmitter for EDGE is designed in $0.18{\mu}m$ CMOS. A differential delta-sigma modulator (DSM) tunes a three-terminal voltage-controlled oscillator (VCO) to perform RF phase modulation, where the VCO tuning curve is digitally pre-compensated for high linearity and the carrier frequency is calibrated by a dual-mode low-power frequency-locked loop (FLL). A digital intermediate-frequency (IF) pulse-width5 modulator (PWM) drives a complementary power-switch followed by an LC filter to achieve envelope modulation with high efficiency. The proposed transmitter with 9mW power dissipation relaxes the time alignment between the phase and envelope modulations, and achieves an error vector magnitude (EVM) of 4% and phase noise of -123dBc/Hz at 400kHz offset frequency.

• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.141-148
• /
• 2015

In this paper, for developing and implementing the HLS(Http Live Streaming) transmitter based embedded linux which is operated easily and cheap and lower power, portable in all networks and client environments compared to exist video live streaming transmitters. We design the developed HLS transmitter hardware using the Arm11 core and then porting the Embedded Linux OS(Operating System) and implementing the HLS protocol using the open source FFmpeg and Segmenter. For proving the performance of developed HLS transmitter, we make the testing environment for testing the performance of HLS transmitter including the notebook, iPhone, android Phone, Notebook and then analysis the received video in the client displayer. In this paper, we suggest the developed HLS transmitter performance data values higher than the Apple company's HLS recommended specification values and the picture of developed HLS transmitter operation in the testing environment. The application field of this paper result is that the man who works in the emergency situation take HLS and transmit the live emergency situation to the head quarter using this portable HLS.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.914-918
• /
• 2000

In this paper, a next generation high speed QPSK transmitter is designed based on 1.8${\mu}$m design rule. The designed transmitter supports the MPEG2-TS coded packed data for the DAVIC standard. Transmitter is composed of the convolutional coder, the shortened Reed-Solomon coder, and QPSK modulator. The coded packets are modulated in APSK with an RC filter. Especially, Galois Field multiplier with a standard basis is designed with the pipelined parallel architecture. Also, in the QPSK modulator, the RC filter and mixer are simplified into the ROM table, which can improve the performance of the transmitter. The total number of gates for the implemented baseband transmitter is 26,875.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.621-623
• /
• 1998

We implemented PanelLlnk digital flat panel display transmitter supporting SXGA($1280{\times}1024$) resolution. It can transmit data through 10m cable at XGA($1024{\times}768$) resolution and through 7m cable at SXGA($1280{\times}1024$). We also found resistor value to get stable display image by low voltage differential signal swing control.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.9
• /
• pp.1-8
• /
• 2010

A digital phase wrapping modulation (DPM) open-loop polar transmitter can be efficiently applied to a wideband orthogonal frequency division multiplexing (OFDM) communication system by converting in-phase and quadrature signals to envelope and phase signals and then employing the signal mapping process. This mapping process is very similar to quantization in a general communication system, and when taking into account the error that appears during mapping process, one can replace the coordinates rotation digital computer (CORDIC) algorithm in the coordinate conversion part with the Taylor series approximation method. In this paper, we investigate the application of the Taylor series approximation to the cartesian to polar coordinate conversion part of a DPM polar transmitter for wideband OFDM systems. The conventional approach relies on the CORDIC algorithm. To achieve efficient application, we perform computer simulation to measure mean square error (MSE) of the both approaches and find the minimum approximation order for the Taylor series approximation compatible to allowable error of the CORDIC algorithm in terms of hardware design. Furthermore, comparing the processing speeds of the both approaches in the implementation with FPGA reveals that the Taylor series approximation with lower order improves the processing speed in the coordinate conversion part.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1134-1136
• /
• 2002

This paper proposes a FSK(Frequency Shift Keying) transmitter which has a inverter for power amplification instead of linear amplifier. As it can generate large signal using resonant circuit under the low voltage source even if the impedance of antenna is large as like a loop antenna of TWC(Train to Way-side Communication) system. In this paper, the proposed fully digital controlled transmitter including FSK modulation is presented and its control schemes are discussed.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2089-2094
• /
• 2010

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. In this paper, Suitable to a subway wireless video transmission OFDM receiver is designed. OFDM receiver system has 6dB gaion because uses diversity of space diversity and MRC(Maximum Ratio Combining) diversity. The transmitter system use C&ITechnologies's transmitter board. IF frequency of receiver is 480MHz. OFDM modulation parameter is as follow, The bandwidth is 8MHz, The numuber of carrier if 2,000, The modulation methode is QAM16, The guard interval is 1/32.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.210-220
• /
• 2005

This paper presents and analyzes laboratory test results of Equalization Digital On-Channel Repeater (EDOCR) using ATSC(Advanced Television Systems Committee) terrestrial digital TV broadcasting system. The EDOCR laboratory test, which is done at CRC(Communications Research Centre) Canada, is classified to receiver test, transmitter test, and synchronization test between transmission and reception frequencies. The receiver part includes feedback signal, random noise, single echo, multi-path ensemble, and NTSC/DTV interference test. The transmitter part includes out-of channel emission, quality of transmitting signal, and phase noise test. By the field test results, the receiver part of the EDOCR eliminates average 5.5 dB of feedback or single echo signal in range of 0 to 11 ${\mu}s$ and has average 18.6 dB at TOV(Threshold of Visibility) under random noise environment. Also, the transmitter part of the EDOCR satisfies the specification of US FCC(Federal Communications Commission), and frequency difference between transmitter and receiver is zero.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.12-17
• /
• 2009

We have implement어 a bust mode optical transmitter using digital temperature compensation architecture with a microprocessor. Instead of previous analog real time technique, we used digital sampling and holding technique for the temperature compensation in order to get stable high speed data transmission of the laser diode. This digital temperature compensation technique should be complemented the previous analog method with accuracy and effectiveness in the over Gb/s transmitting application.