• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.844-851
• /
• 2021

Due to the increase in consumers' interest about well-being, interest in eco-friendly products has been increasing due to the harmful effects of various harmful substances contained in textile products and environmental issues. As a result, natural dyes of less potential risk than synthetic dyes and digital textile printing(DTP) textile products with less environmental pollution are drawing attention. However, due to the lack of evaluation criteria for DTP textile products with natural ink and the nature of many colors are stacked layer by layer for dying, the need for simultaneous analysis is emerging. To evaluate whether the natural dye is derived from natural ingredients, the biocarbon content is analyzed. However, in the case of ink made using natural dyes and DTP textile products using natural ink, it is difficult to analyze the biocarbon content due to the limitation of the presence of a small amount of dye contained therein. In this study, we were shown the possibility of natural derived verification by cross-checking the analytes of natural dyes (Persicaria tinctoria, an indigo dye; Dactylopius coccus, a light red; and Curcum longa L., i.e., turmeric) and natural ink with HPLC-MS/MS. The coefficient of determination was 0.999 or higher, the limit of quantification was 0.647-3.664 ㎍/L and a %RSD of each indicator material was less than 10. Then, the extraction amount of natural dyes for five patterned fabrics was analyzed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.2
• /
• pp.67-73
• /
• 2010

Whole process of textile printing is made by computer and it remarkably improves environment problem. This digital textile printing is becoming next step environment friendly textile printing method. But, still now range of textile possible for digital textile printing is limited, and also color analysis according to fiber types is not completed. The ink printed on the fabrics through DTP printer can be absorbed and fixed into textile without any blots by pre-treatment using suitable media solution for fabrics types. The chemical formulation of media solution used in the pre-treatment process varies according to the types of textiles and inks for DTP products. First, I studied reference books or articles about color analysis of digital textile printing. Second, I recorded pre-process, printing, post-process and coloring of silk, wool, nylon at same condition. After that, I analyzed $L^*\;a^*\;b^*$, Total K/S, ${\Delta}E$ and studied color intensity and coloring. According to this study, I suggested particular textile special for coloring and manual for affective coloring control. It showed that the performance of the digital printing on the Silk, Wool and Nylon blend fabrics treated by the media solution developed in this study was better than the one treated by the previous media solution for each single inks.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.202-209
• /
• 2021

Natural dyes are more expensive than synthetic dyes and the dyeing process, which is mainly immersion of dye, is complicated. For this reason, relatively small-scale production methods were predominant. However, awareness and interest in environmental sustainability is rising globally, and the use of synthetic dyes causes various environmental problems such as wastewater and CO₂ emission, so the consumption of natural dyes is increasing. In addition, interest in digital textile printing, an eco-friendly dyeing method that can produce products of various designs and uses less water, is growing. In this study, natural indigo dye (Indigofera tinctoria) was used as a raw material for Digital Textile Printing ink, and ¹⁴C (Biocarbon) present in it was measured to confirm whether it was derived from natural ingredients. The performance was confirmed by testing the pH, viscosity, electrical conductivity, surface tension, and particle size analysis of natural indigo ink. In addition, the performance of natural indigo DTP ink and printing fabric was evaluated by inspecting the change in color fastness and corresponding index substances before and after digital printing with natural indigo DTP ink on textiles. Through this, the possibility of commercialization of DTP ink and printing fabric using natural indigo was confirmed.

• Journal of Fashion Business
• /
• v.13 no.6
• /
• pp.89-98
• /
• 2009

Computer development and new printing technology allow us to express a new type of digital textile designs those were not possible in the past. In this study, watercolor overlaying effect of various colors was tried using airbrush tool in Photoshop program. Photoshop program is a powerful graphic tool and can be used in textile design area to generate various types of designs. Woven texture was also applied to the design to give yarn dyed effects or rich appearance. Photoshop program was also used to develop woven texture without the help of the professional textile CAD. Photoshop channels enables the designers to apply various textures to the image. Plain weave and houndstooth were applied in this study. Colorways of the developed designs having watercolor effect and woven texture by applying Photoshop color adjustment function. Quick and simultaneous changes of colors were possible using this method. The developed textile designs were printed by transfer DTP. Successful textile design prints were expressed and showed watercolor overlaying effect and woven texture. The printed textiles show a little brighter color, and therefore, sample printing is recommendable in case of color sensitive production.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.220-229
• /
• 2021

This study is aimed to a textile design with a motif of korean endemic plants and a method for printing it in an eco-friendly manner. The floral pattern with the motif of korean endemic plants was designed using Illustrator and Photoshop program. CMYK color, which is the basic color of Digital Textile Printing (DTP), is based on natural dyes, and various colors, achromatic colors and pastel tones are applied. As a result, half-linen and cotton were suitable as a result of designing and applying a floral pattern of a korean special plants. Also, as a result of analyzing the printing effect by colorway and DTP for each material, it was printed uniformly and the washing fastness was good. However, fastness of color change showed low, indicating that a follow-up study was needed. This study contributes to environmental conservation through eco-friendly printing and the korean endemic plants will be interested in people around the world beyond korea.

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.138-150
• /
• 2012

Nano Inkjet DTP technology, a new technology introduced recently, can be applied to various types of fabric, and pre-treatment process can be omitted, which makes the whole printing process compact. Some important factors for DTP are color difference between the color selected by the designer on PC and the color on the final product and durability of the final fabrics. In this study, the twenty-three trend colors of 2012-2013 F/W suggested by PeclersParis have been picked to be printed on cotton, silk and polyester fabrics, then K/S and ${\Delta}E$ value and color fastness were measured. The results show that dyeability of fabric is varied for each color group, and that also tone of color affect to dyeability when measured for colors in the same group. In general, for all fabric, light fastness, washing fastness and color fastness to sublimation are outstanding. However, because of poor rubbing fastness, additional treatment to fix colorant on fabric is required.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.667-672
• /
• 2004

Poly(ethylene terephthalate) (PET) fabrics were treated with a silica particle and phosphate flame retardant to determine the optimum process condition of the digital textile printing(DTP) media. The treating conditions for the study were 6 conditions, from F1 to F6, in which F3, F4 and F5 were treated with mixture of both silica particle and phosphate compound in process of pad, dry and cure fixation. F6 was treated with phosphate compound only and silica particle coating successively. Xanthan gum was used to control the migration of liquid phosphate compound onto PET fabrics. The change in surface morphology of fabrics treated with silica particle and phosphate compound was observed by SEM and flame retardance was evaluated by limiting oxygen index(LOI). It was observed that F6 was the excellent flame retardance and low bleeding in printing, Collectively, the printing characteristics of silica to cyan, magenta, yellow and black ink and flame retardance of fabrics finished with phosphate compound were identified in this study.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.371-372
• /
• 2007