• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.587-592
• /
• 2002

A new digital correlator fur an airborne synthetic aperture radiometer was designed in order to replace the conventional analog correlator unit which will become very complicated while the number of channels is increasing. The digital correlator uses digital IQ demodulator instead of the intermediate frequency (IF) phase shifter to make the correlation processing performed digitally at base band instead of analogly at IF. This technique has been applied to the digital receiver in softradio. The down-converted IF signals from each pair of receiver channels become low rate base-band digital signals after under-sampled, Digitally Down-Converted (DDC), decimated and filtered by FIR filters. The digital signals are further processed by two digital multipliers (complex correlation), the products are integrated by the integrators and finally the outputs from the integrators compose of the real part and the imaginary part of a sample of the visibility function. This design is tested by comparing the results from digital correlators and that from analog correlators. They are agreed with each other very well. Due to the fact that the digital correlators are realized with the help of Analog-Digital Converter (ADC) chips and the FPGA technology, the realized volume, mass, power consumption and complexity turned out to be greatly reduced compared with that of the analog correlators. Simulations show that the resolution of ADC has an influence on the synthesized antenna patterns, but this can be neglected if more than 2bit is used.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1264-1267
• /
• 2003

To protect the digital image, video and audio from non-authorized use, the digital watermarking technology has received a great attention in the field of multimedia in recent years . An overview of the development of watermark techniques is given in the current paper followed by a discussion of potential application of spatial domain, transform domain watermark techniques in remote sensing images copyright protection and verification in different forms of processed images.

• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.903-910
• /
• 2009

In this paper, a digital average current mode control using diode current sensing technique is proposed. Although the conventional inductor current sensing technique is widely used, the sensed signal of the current is negative. As a result, it requires an additional circuit to be applied to general digital controller ICs. The proposed diode current sensing method not only minimizes the peripheral circuit around the digital IC but also consumes less power to sense current information than the inductor current sensing method. The feasibility of the proposed technique is verified by experiments using a 500W power factor correction (PFC) boost rectifier.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.484-489
• /
• 2002

This paper concerns the design and implementation of a Bandwidth Variable Digital Chirp Generator (DCG) for the radar altimeter. A double SRAM parallel structure is used to breakthrough the upper DCG bandwidth limited by the highest clock frequency of the digital chips. An experimental system working in the waveform storage method has been implemented. We show that the bandwidth changed according to the radar altimeter's requirement and the design released the stringent speed requirement of the chips fur making a variable wide bandwidth DCG.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.901-901
• /
• 2003

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2454-2468
• /
• 2019

The existing direct position determinations(DPD) for coherently distributed(CD) sources are mostly applicable for uniform linear array(ULA), which result in a low degree of freedom(DOF), and it is difficult for them to realize the effective positioning in underdetermined condition. In this paper, a novel DPD algorithm for coherently distributed sources based on compressed sensing with a moving nested array is present. In this algorithm, the nested array is introduced to DPD firstly, and a positioning model of signal moving station based on nested array is constructed. Owing to the features of coherently distributed sources, the cost function of compressed sensing is established based on vectorization. For the sake of convenience, unconstrained transformation and convex transformation of cost functions are carried out. Finally, the position coordinates of the distribution source signals are obtained according to the theory of optimization. At the same time, the complexity is analyzed, and the simulation results show that, in comparison with two-step positioning algorithms and subspace-based algorithms, the proposed algorithm effectively solves the positioning problem in underdetermined condition with the same physical element number.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.277-279
• /
• 2003

The study utilizes remote sensing as the main monitoring means. With different spatial high-resolution, multichannel ASTER remote sensing image as the main information in Beijing city zone; with regional border and statistical data as auxiliary factor a study between the thermal space distribution character and the underground medium is analyzed based on the GIS logical algorithm and synthetic analysis technology. Results show thermal forming mechanism and the rule of distribution is mainly related to the underground medium and the change of the city distribution. Different underground medium has different degree and intensity influence on the thermal space distribution. Furthermore, urban greenbelt and water areas can reduce the thermal effect and large-scale greenbelt creates green island effect. In addition, Road net, residential area, population density, heat resources and so on have some positive effect on the thermal distribution, which increase the local temperature and intensity on the other hand. It is important to study the thermal distribution and its related factors, which contributes to the plan, construction and development of the city.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.3
• /
• pp.75-83
• /
• 2011

Cognitive radio (CR) technology is to maximize the spectrum utilization by allocating the unused spectrums to the unlicensed users. This technology enables the sharing of channels among secondary (unlicensed) and primary (licensed) users on a non-interference basis after sensing the vacant channel and as a result, it is possible to harness wireless frequency more efficiently. To enhance the accuracy of sensing, RDSS was suggested. It is a fusion mechanism based on the reputation of sensing nodes and WSPRT (weighted sequential probability ratio test). However, in RDSS, the execution number of WSPRT could increase according to the order of inputted sensing values, and the fast defense against the forged values is difficult. In this paper, we propose a transaction signing-based authentication scheme for secure distributed spectrum sensing to response the forged values. The validity of proposed scheme is provided by BAN logic.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.773-775
• /
• 2003

From the view point of data fusion, we integrate LIDAR data and digital aerial images to perform 3D building modeling in this study. The proposed scheme comprises two major parts: (1) building block extraction and (2) building model reconstruction. In the first step, height differences are analyzed to detect the above ground areas. Color analysis is then performed for the exclusion of tree areas. Potential building blocks are selected first followed by the refinement of building areas. In the second step, through edge detection and extracting the height information from LIDAR data, accurate 3D edges in object space is calculated. The accurate 3D edges are combined with the already developed SMS method for building modeling. LIDAR data acquired by Leica ALS 40 in Hsin-Chu Science-based Industrial Park of north Taiwan will be used in the test.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.911-913
• /
• 2003

Recently in order to process forest official task more effectively and scientifically the previous of that which is focused on document and inventory, should be applied with the spatial information technology. Especially, the forest information remote sensing system has to be developed using digital photogrammetry and GIS. In this study the forest information remote sensing system is implemented to manage forest resource and forest official effectively especially by constructing database of forest environment information and cadastral information, overlaying various thematic maps, and performing spatial analysis using GIS and aerial photograph. For this, the attribute data and spatial data of aerial photograph, digital topography map, forest cadastral map, forest type map, forest use map should be reprocessed and stored in Oracle. Also, the user interface is developed by using Visual Basic 6.0 and MapObjects 2.1 of ESRI based on CBD(Component Based Development).