• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2022

PURPOSE. The maximum width between the mesial and distal labial transitional line angles, described as "esthetic width" herein, could significantly influence the visual perception of the teeth and smile. This study aimed to conduct biometric research on esthetic width and to explore whether regular distribution exists in the esthetic width of human teeth. MATERIALS AND METHODS. A total of 4,264 maxillary and mandibular anterior teeth were measured using the Geomagic studio software program. The proportions of maxillary to mandibular homonymous teeth and proportions between the adjacent teeth were calculated. Bilateral symmetry and the correlation between the esthetic and mesiodistal widths were both accounted for during the measurement procedures. RESULTS. The mean esthetic widths were 6.773 ± 0.518 mm and 4.329 ± 0.331 mm for maxillary and mandibular central incisors, respectively, 5.451 ± 0.487 mm and 5.008 ± 0.351 mm for maxillary and mandibular lateral incisors, respectively, and 3.340 ± 0.353 mm and 5.958 ± 0.415 mm for maxillary and mandibular canines, respectively. Except for the mandibular canines, no significant difference in esthetic width was found among homonymous teeth from the same jaw. A high linear correlation was found between the esthetic and mesiodistal widths of the same tooth, except for the maxillary canines. Esthetic width proportions among different tooth categories showed some regular patterns, which were similar to those of the mesiodistal width. CONCLUSION. Esthetic width is regularly distributed among the teeth in the Chinese population. This could provide an important reference for anterior dental restorations and dimension recovery in esthetic reconstruction of anterior teeth.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.2
• /
• pp.63-69
• /
• 2011

Table strapis patient fixture for securing the patient movements and falls. if it designed to measure the abdominal circumference and used as an indicator of dose selection at CT scan. it will prevent the overexposure of dose without degradation of image quality and efficiently manage dose of each type of body to technician to deal with CT. First, in order to compare the dose used in CT image and qualitative characteristics. reference image is obtained by examining the abdominal phantom in same conditions with the hospital 120 kVp, 200 mAs, D-Dom (Dynamic Dose Of Modulation). SNR, PSNR, RMSE, MAE, CTDIvol of CT images are compared with reference image. for comparing with reference image, the image that Umbilicus level image of Abdomen CT is stored in the PACS were used. For comparison, the top 12 o'clock portion of the air drawn from the same ROI was measured. CTDIvol, mAs, etc. In order to analyze the characteristics of the image, by measuring the length of the umbilicus circumference, pattern of the dose was analyzed. by using the analyzed perimeter and dose information, To be identified visually, fixed band that scale marked were produced. Use them, If the length of circumference of less than 60 cm 100 mAs, Case of 61~80 cm 120 mAs, Case of 80~100 cm 150 mAs, more than 100 cm 200 mAs, dose selection based on the perimeter, the image was applied. by compare analyzed with the Reference Image, image quality was assessed. by compare with existing tests that equally 200 mAs applied, How much was confirmed that the dose reduction. 1. Depending on the Abdominal circumference, the average PSNR(dB) of the image that differently dose applied was 45.794. 2. Comparing with existing test. the dose of scan that adjusted the mAs depending on the circumference was decreased about 40%. SNR and PSNR of the image that obtained by adjusting the standard mAs based on dose modulation were not much different. Therefore, By choosing a low mAs. dose reduction can be obtained. and the dose selection method that measured Abdominal circumference using a fixed band can protect the overexposure and uniformly apply dose of each type of body to technician to deal with CT.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.295-302
• /
• 2014

Essential to the establishment of such 3D spatial information are the laser scanning technology to obtain high-precision 3D point group data and the photography-metric camera to obtain high-resolution multispectral image information. The photography-metric camera, however, lacks in usability for its broad scope of utilization due to the high purchase price, difficult purchase channel, and low applicability. This study thus set out to investigate a technique to establish multi-dimensional ortho-image data with a single lens reflex digital camera of high speed and easy accessibility for general users. That is, the study remodeled a single lens reflex digital camera and calibrated the remodeled camera to establish 3D multispectral image information, which is the essential data of 3D spatial information. Multi-dimensional ortho-image data were collected by surveying the reference points for stereo photos, taking multispectral shots of the objects, and converting them into ortho-images.

• The Journal of Information Systems
• /
• v.21 no.2
• /
• pp.97-114
• /
• 2012

Given the rapid growth of social network services (SNS) such as Facebook and Cyworld, it is important to understand SNS users' decision-making processes such as purchasing and continuance intention. Especially, as a number of SNS providers such as Cyworld and Habbo Hotel recognize the sales of digital items as the main source of their profits, it is critical to in-depth understand SNS users' purchasing behaviors. In this regard, this study explores continued usage behaviors and purchase behaviors of digital items in an SNS environment using a longitudinal research method. This paper develops a theoretical model to deeply understand the key drivers of purchase behavior of digital items through constructs prescribed by two established research streams on information systems, namely continuance usage and habitual usage. Moreover, this study examines the effects of actual and ideal self-image congruity on SNS continuance intention and habit. The research model was tested by using survey data collected from 307 users who have experience with Cyworld. The analysis results show that SNS actual usage directly influence purchase behavior of digital items. SNS users' continuance intention and habit are key drivers to enhance the level of actual usage of the SNS. Both actual and ideal self-image congruity play a key role in enhancing continuance usage and habitual usage. The implication of research and discussions provides reference for SNS providers in marketing and IT strategy.

• Journal of Korea Multimedia Society
• /
• v.4 no.3
• /
• pp.247-256
• /
• 2001

Digital watermarking is a copyright protection technique for digital images which embed a code into the digital data so the data is marked. Watermarking techniques previously deal with on-line digital data and have been developed to withstand digital attacks such image processing, compression and geometric transformation. In this paper we propose a novel method of embedding watermarks in printed images. In the proposed algorithm, watermark is embedded in a dithered binary image by comparing the $2\times{2}$ blocks of the counting array is the number of 1 (WHITE) in the $16\times{16}$ blocks of the dithered binary image with predefined reference block pattern, which is generated by watermark values. The proposed algorithm is able to provide more information at a watermark because the proposed algorithm use both '1'and '0' as watermark values. The watermark information is detected by comparing the watermark which is reconstructed from the image which is embedded watermark with the original watermark which is embedded in a binary image. The performance of the proposed algorithm is compared with that of the conventional watermark embedding algorithm for printed images by detecting watermark for scan images.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.5
• /
• pp.555-561
• /
• 2008

Purpose: The goal of this study was to develop a technique for creating a computerized composite maxillofacial-dental model, based on point-based surface best fit algorithm and to test its accuracy. The computerized composite maxillofacial-dental model was made by the three dimensional combination of a 3-dimensional (3D) computed tomography (CT) bone model with digital dental model. Materials and Methods: This integration procedure mainly consists of following steps : 1) a reconstruction of a virtual skull and digital dental model from CT and laser scanned dental model ; 2) an incorporation of dental model into virtual maxillofacial-dental model by point-based surface best fit algorithm; 3) an assessment of the accuracy of incorporation. To test this system, CTs and dental models from 3 volunteers with cranio-maxillofacial deformities were obtained. And the registration accuracy was determined by the root mean squared distance between the corresponding reference points in a set of 2 images. Results and Conclusions: Fusion error for the maxillofacial 3D CT model with the digital dental model ranged between 0.1 and 0.3 mm with mean of 0.2 mm. The range of errors were similar to those reported elsewhere with the fiducial markers. So this study confirmed the feasibility and accuracy of combining digital dental model and 3D CT maxillofacial model. And this technique seemed to be easier for us that its clinical applicability can good in the field of digital cranio-maxillofacial surgery.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.13-22
• /
• 2018

In this paper, double encryption technology of image based on scramble operation and phase-shifting digital holography is proposed. For the purpose, we perform first encryption digitally using scramble operation for the to be encrypted image, and perform phase modulation to the first encrypted image. Finally, we get the secondary encryption information through the interference between the phase-shifted reference wave and phase modulated image. The decryption process proceeds in the reverse order of the encryption process. The original image is reconstructed by digitally decoding the two encrypted images through a phase shift digital holography technique that appropriately performs arithmetic processing, phase-demodulating and then using the encryption key information used in the scramble operation. The proposed cryptosystem can recover the original image only if both the key information used in the scramble operation, the distance information used in the phase shift digital holography technique, and the wavelength of the light source are known accurately.

• Journal of the Korean Dietetic Association
• /
• v.15 no.3
• /
• pp.278-285
• /
• 2009

The purpose of this pilot study was to examine the feasibility of using digital pictures to assess individuals' nutrient intakes from school lunch. The subjects for the study were 29 male students and 40 female students from two classes in a middle school located in Daejeon Metropolitan City, Korea. The school lunch service was self-operated and the students were allowed to portion the foods by themselves. The teacher in charge of each class took digital pictures of every student's lunch plate that was tagged with an i.d. number, before and after eating for two consecutive days. The researchers estimated the amount of food, which an individual actually consumed by comparing pre- and post-pictures of their plate with reference food pictures for better visual estimation of the food amounts. Individual energy and nutrient intakes were calculated using CAN-Pro (ver 3.0) using the food intake data visually estimated from the digital pictures and school lunch recipes. The teachers in charge reported that about 10~15 additional minutes were needed to take the pictures used for the study and this additional time did not place much burden on the service process during the lunch period. The results showed that the students' actual energy and nutrient intakes from the same school lunch menus were quite varied as the serving portions were not regulated and left-overs were not prohibited. This pilot study suggests that examination of individual nutrient intake using digital picture is a feasible method in the context of school lunch service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2146-2152
• /
• 2008

In In this paper, we proposed a new JPEG2000 codec using multiresolution-based rendering (MRBR) technique for video compression of 3-dimensional digital cinema. We introduced discrete wavelet transform (DWT) for stereoscopic image and stereo matching technique in the wavelet domain. The disparity was extracted using stereo matching and transmitted with the reference (left) image. Since the generated right image was degraded by the occlusion lesion, the residual image which is generated from difference between the original right image and the generated one was transmitted at the same tine. The disparity data was extracted using the dynamic programming method in the disparity domain. There is high correlation between the higher and lower subbands. Therefore we decreased the calculation amount and enhanced accuracy by restricting the search window and applying the disparity information generated from higher subband.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.128-130
• /
• 2016

The digital content industry is growing rapidly with the popularity of online content and mobile devices. This study estimates the technical efficiency of the online digital content industry, and identifies factors that could be causing inefficiency. Unlike most previous studies, which adopted input-oriented or output-oriented DEA model, this study employs non-oriented DEA model in order to deal with both input surpluses and output shortfalls. The input variables for the empirical analysis are number of companies and number of workers. The total sales is used as the output variables. The empirical results show that the technical efficiency of the online digital content industry is relatively low mainly due to the scale efficiency rather than the pure technical efficiency. This implies that industry-specific policies should be implemented in order to improve technical efficiency as well as to strengthen technological innovation capability. Therefore, it is expected that the results obtained in this study can be used as a good reference for helping the online digital content industry enhance their competitiveness.