• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.261-265
• /
• 2003

Cold air accumulation plays a critical role in formulating daily minimum temperature in complex terrain on radiative cooling nights, and spatial interpolation can be improved by accommodating this important topoclimatic variable. Little is known about the spatial scale for computing cold air accumulation which influences daily minimum temperature. Air temperature was measured at 10-minute intervals during September 2002- February 2003 at eight locations within a 1 by 1 km hilly orchard area. Minimum temperature data for suspected radiative cooling nights were collected, and the deviations from reference observations at a near-by KMA automated weather station were calculated. A digital elevation model with a 10m cell size was used to calculate the cold air accumulation at 8 locations. Zonal averages of the cold air accumulation were computed for each location by increasing the cell radius from 1 to 10. Temperature deviations were regressed to a common logarithm of the smoothed averages of cold air accumulation to derive a linear relationship between the local temperature deviation and the site topography. The highest coefficient of determination ($r^2$ = 0.78) was found at a cell radius of 5, which corresponds to an approximately 1 ha boundary surrounding the point of interest.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1142-1149
• /
• 2004

Motion Estimation(ME) has been developed to reduce temporal redundancy in digital video signals and increase data compression ratio. ME is an Important part of video encoding systems, since it can significantly affect the output quality of encoded sequences. However, ME requires high computational complexity, it is difficult to apply to real time video transmission. for this reason, motion estimation algorithms with low computational complexity are viable solutions. In this paper, we present an efficient method with low computational complexity based on spatial and temporal correlations of motion vectors. The proposed method uses temporally and spatially correlated motion information, the motion vector of the block with the same coordinate in the reference frame and the motion vectors of neighboring blocks around the current block in the current frame, to decide the search pattern and the location of search starting point adaptively. Experiments show that the image quality improvement of the proposed method over MVFAST (Motion Vector Field Adaptive Search Technique) and PMVFAST (Predictive Motion Vector Field Adaptive Search Technique) is 0.01～0.3(dB) better and the speedup improvement is about 1.12～l.33 times faster which resulted from lower computational complexity.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.196-202
• /
• 2003

In 3-dimensional conformal radiation therapy (3D-CRT) and intensity-modulated radiation therapy (IMRT), many studies on reducing setup error have been conducted in order to focus the irradiation on the tumors while sparing normal tissues as much as possible. As one of these efforts, we developed an image enhancement and registration tool for simulators and portal images that analyze setup errors in a quantitative manner. For setup verification, we used simulator (films and EC-L films (Kodak, USA) as portal images. In addition, digital-captured images during simulation, and digitally-reconstructed radiographs (DRR) can be used as reference images in the software, which is coded using IDL5.4 (Research Systems Inc., USA). To improve the poor contrast of portal images, histogram-equalization, and adaptive histogram equalization, CLAHE (contrast limited adaptive histogram equalization) was implemented in the software. For image registration between simulator and portal images, contours drawn on the simulator image were transferred into the portal image, and then aligned onto the same anatomical structures on the portal image. In conclusion, applying CLAHE considerably improved the contrast of portal images and also enabled the analysis of setup errors in a quantitative manner.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.155-160
• /
• 2005

The aim of this study is to establish anatomical dimension of the lip in young population in Korean, using specially designed soft ware with photographic image. We measure 13 anatomical dimensions of lips in 2,229 young people. (917 male, 1312 female, Aged from 18-33 years. Average age 19.7). Statistical analysis of these measurements of large population could offer useful information in facial plastic surgery. The mean measurements are as follows 1. Lengths (male/female) Widths of philtrum: $1.11{\pm}0.19cm/1.02{\pm}0.21cm$ Heights of philtrum: $1.6{\pm}0.24cm/1.47{\pm}0.21cm$ Heights of cupid bow: $0.88{\pm}0.16cm/0.83{\pm}0.16cm$ Height of upper vermilion: $0.74{\pm}0.16cm/0.70{\pm}0.15cm$ Height of lower vermilion: $1.08{\pm}0.17cm/1.02{\pm}0.15cm$ Height of upper lip(Rt.): $1.24{\pm}0.2cm/1.23{\pm}0.2cm$ Height of upper lip(Lt.): $1.24{\pm}0.2cm/1.17{\pm}0.19cm$ Half horizontal length of lip: $2.2{\pm}0.26cm/2.11{\pm}0.2cm$ Horizontal length of lip: $4.41{\pm}0.4cm/4.25{\pm}0.36cm$ Height of lower face: $7.1{\pm}0.58cm/6.52{\pm}0.6cm$ 2. Angles Nasolabial angle: $97.77{\pm}11.97^{\circ}/95.5{\pm}11.34^{\circ}$ Mentolabial angle: $133.88{\pm}14.65^{\circ}/129.27{\pm}13.67^{\circ}$ Angle of Cupid's bow: $111.65{\pm}13.99^{\circ}/116.75{\pm}16.2^{\circ}$ Previous reported photogrammetric measurements was difficult to implement to surgical practice. Because these were printed photographies of the same size. Therefore, in this study, we can measure a lot of objects and items more conveniently and correctly by using proportional program on computer after taking a digital photograph. Consequently, proportional measurements with photogrammetry of lip could be useful and corrective substitute for anthropometrical measuring. These data could be useful reference for preoperative consultation, surgical planning and learning anatomical measurement of lips and adjacent structures.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.1
• /
• pp.40-49
• /
• 2013

Current service system of the Korea Meteorological Administration (KMA) for blooming date forecasting in spring depends on regression equations derived from long term observations in both temperature and phenology at a given station. This regression based system does not allow a timely correction or update of forecasts that are highly sensitive to fluctuating weather conditions. Furthermore, the system cannot afford plant responses to climate extremes which were not observed before. Most of all, this method may not be applicable to locations other than that which the regression equations were derived from. This note suggests a way to replace the location restricted regression equations with a thermal time based phenology model to complement the KMA blooming forecast system. Necessary parameters such as reference temperature, chilling requirement and heating requirement were derived from phenology data for forsythia, azaleas and Japanese cherry at 29 KMA stations for the 1951-1980 period to optimize spring phenology prediction model for each species. Best fit models for each species were used to predict blooming dates and the results were compared with the observed dates to produce a correction grid across the whole nation. The models were driven by the KMA's daily temperature data at a 5km grid spacing and subsequently adjusted by the correction grid to produce the blooming date maps. Validation with the 1971-2012 period data showed the RMSE of 2-3 days for Japanese cherry, showing a feasibility of operational service; whereas higher RMSE values were observed with forsythia and azaleas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1102-1107
• /
• 2004

Fingerprint Recognition System is made up of Off-line treatment and On-line treatment; the one is registering all the information of there trieving features which are retrieved in the digitalized fingerprint getting out of the analog fingerprint through the fingerprint acquisition device and the other is the treatment making the decision whether the users are approved to be accessed to the system or not with matching them with the fingerprint features which are retrieved and database from the input fingerprint when the users are approaching the system to use. In matching between On-line and Off-line treatment, the most important thing is which features we are going to use as the standard. Therefore, we have been using “Delta” and “Core” as this standard until now, but there might have been some deficits not to exist in every person when we set them up as the standards. In order to handle the users who do not have those features, we are still using the matching method which enables us to make up of the spanning tree or the triangulation with the relations of the spanned feature. However, there are some overheads of the time on these methods and it is not sure whether they make the correct matching or not. Therefore, I would like to represent the more correct matching algorism in this paper which has not only better matching rate but also lower mismatching rate compared to the present matching algorism by selecting the line segment connecting two minutiae on the same ridge and furrow structures as the reference point.

• Cartoon and Animation Studies
• /
• s.47
• /
• pp.295-333
• /
• 2017

This study is a basic study to prepare policies related to selecting media to be included in textbooks. Researchers looked at previous studies focusing on how media affect children's and adolescent's emotions according to their developmental stages. Researchers also wanted to identify how the media is related to student emotions, health, and educational effectiveness. The researchers then examined a wide range of domestic media review and rating criteria, and argued that it is necessary to institutionalize the rating system of media at national level policy level. Based on the previous discussion, the researchers made seven suggestions. First, it is necessary to specify media selection criteria in the guidelines for issuing textbooks at the national level. Second, guidelines are needed to help review the political neutrality and human rights aspects of the media for inclusion in textbooks. Third, media selection guidelines in textbooks should be detailed with reference to categories and age based criteria of domestic and foreign media rating system. Fourth, the media rating system should be applied flexibly if there is a clear educational purpose. Fifth, institutional support is needed for setting guidelines for media collection of textbooks. Sixth, media experts should participate in the whole process of textbook development. Seventh, educational programs should be implemented to support teachers to use self directed learning by using educational media in classroom instruction.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.361-373
• /
• 2013

The monitoring of urban area, target detection and building reconstruction have been actively studied and investigated since high resolution X-band SAR images could be acquired by airborne and/or satellite SAR systems. This paper describes an efficient approach to reconstruct artificial structures (e.g. apartment, building and house) in urban area using high resolution X-band SAR images. Building footprint was first extracted from 1:25,000 digital topographic map and then a corner line of building was detected by an automatic detecting algorithm. With SAR amplitude images, an initial building height was calculated by the length of layover estimated using KS-test (Kolmogorov-Smirnov test) from the corner line. The interferometric SAR phases were simulated depending on SAR geometry and changable building heights ranging from -10 m to +10 m of the initial building height. With an interferogram from real SAR data set, the simulation results were compared using the method of the phase consistency. One of results can be finally defined as the reconstructed building height. The developed algorithm was applied to repeat-pass TerraSAR-X spotlight mode data set over an apartment complex in Daejeon city, Korea. The final building heights were validated against reference heights extracted from LiDAR DSM, with an RMSE (Root Mean Square Error) of about 1~2m.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.1
• /
• pp.1-17
• /
• 2001

This research is primarily intended to develop a decision-making support system about the natural environment in the country by integrating various formats of spatial data into a comprehensive GIS database. The first part of the research is to design GIS database as a means of combining thematic cartographic data with field survey records. Ecosystem records acquired by a field sampling have been reproduced as digital thematic maps. The database also included various natural environment related data (map for forestry, soil, national park etc.) collected from many other agencies. The second part of the research is devoted to the design of efficient man-machine interfaces. A key concern in the GUI (graphic user interface) design process was to address the need to handle and to manage large databases by non-GIS experts. The system has been checked experimentally, enabled the users to quarry the data required simply and execute spatial analysis accommodating versatile alternatives in decision-making process. Detailed visual maps can be generated over large areas quickly and easily. The system will serve to increase the scientific and objective decision-making by overcoming serious constraints suffered from the past non-GIS-based approach. It is anticipated that this research output could be used as a valuable reference in building a nationwide natural environment GIS-DB (database) in the central and local governments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.33-46
• /
• 2015

In this paper, we predicts the analog and digital circuit performance of FinFETs that are scaled down following the ITRS(International technology roadmap for semiconductors). For accurate prediction of the circuit performance of scaled down devices, accurate parasitic resistance and capacitance analytical models are developed and their accuracies are within 2 % compared to 3D TCAD simulation results. The parasitic capacitance models are developed using conformal mapping, and the parasitic resistance models are enhanced to include the fin extension length($L_{ext}$) with respect to the default parasitic resistance model of BSIM-CMG. A new algorithm is developed to fit the DC characteristics of BSIM-CMG to the reference DC data. The proposed capacitance and resistance models are implemented inside BSIM-CMG to replace the default parasitic model, and SPICE simulations are performed to predict circuit performances such as $f_T$, $f_{MAX}$, ring oscillators and common source amplifier. Using the proposed parasitic capacitance and resistance model, the device and circuit performances are quantitatively predicted down to 5 nm FinFET transistors. As the FinFET technology scales, due to the improvement in both DC characteristics and the parasitic elements, the circuit performance will improve.