• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.495-499
• /
• 2014

In this paper, a method is proposed for simultaneously measuring the front and back surface profiles of transparent micro-optical components. The proposed method combines a dual-wavelength digital holographic microscope with liquids to record holograms at different wavelengths, and then numerically reconstructs the three-dimensional phase information to image the front and back sides of the sample. A theoretical model is proposed to determine the surface information, and imaging of an achromatic lens is demonstrated experimentally. Unlike conventional interferometry, our proposed method supports nondestructive measurement and direct observation of both front and back profiles of micro-optical elements.

• 대기
• /
• 제27권3호
• /
• pp.331-344
• /
• 2017

Solar energy is calculated using high-resolution digital elevation model (DEM). In focus on Seoul metropolitan area, correction coefficients of direct and diffuse solar energy with the topographic effect are calculated from DEM with 1720, 900, 450, 90 and 30 spatial resolutions ($m{\times}m$), respectively. The solar energy on the real surface with high-resolution is corrected using by the correction coefficients with topographic effect from the solar energy on horizontal surface with lower resolution. Consequently, the solar energy on the real surface is more detailed distribution than those of horizontal surface. In particular, the topographic effect in the winter is larger than summer because of larger solar zenith angle in winter. In Seoul metropolitan area, the monthly mean topographic effects are more than 200% in winter and within 40% in summer. And annual topographic effects are negative role with more than -60% and positive role with below 40%, respectively. As a result, topographic effect on real surface is not a negligible factor when calculating and analyzing solar energy using regional and global models.

• 한국추진공학회지
• /
• 제21권6호
• /
• pp.15-20
• /
• 2017

본 연구에서는 입자강화 복합재료의 파괴에너지와 변위장 특성에 대하여 분석하였다. 재료가 노출될 수 있는 온도인 상온, $-40^{\circ}C$와 $-60^{\circ}C$에서 쐐기쪼갬 시험을 수행하여 각 온도에 따른 재료의 파괴에너지를 산출하였다. 변위장과 변형률장은 DIC법을 활용하여 가시화 하였으며, 변위장은 DIC를 이용한 표시추적방법에 의해 측정하였다. 시험 결과, 온도가 낮아질수록 파괴에너지는 감소하였다. 표면 변위장은 상온과 $-40^{\circ}C$에서 유사하였고, $-60^{\circ}C$에선 입자강화 복합재료의 취성거동으로 인하여 크게 감소하였다. 변형률장에선 온도가 내려갈수록 전체적인 변형률범위가 감소하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.181-184
• /
• 2008

The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study sequentially utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using DTM and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

• 대한원격탐사학회지
• /
• 제36권5_3호
• /
• pp.1013-1025
• /
• 2020

UAV (Unmanned Aerial Vehicle) 플랫폼은 소규모 지역의 영상을 저비용으로 신속하게 취득이 가능하다는 장점이 있어 재난모니터링과 스마트시티 분야에 널리 활용되고 있다. UAV 기반 정사영상 및 DSM (Digital Surface Model) 제작 시 cm 급 정확도를 확보하기 위하여 UAV 영상의 위치보정을 위한 지상기준점(Ground Control Points, GCP)이 필수적이다. 하지만, 현장 GCP 취득을 위한 현장방문, 대공표지 설치에는 상당한 인력과 시간이 소요된다. 따라서 본 연구에서는 GCP 현장 취득을 대체하기 위한 방법으로 사전에 구축되어 활용가능한 세 가지 공간정보를 GCP로 이용하는 방법을 제시하였다. 연구에 사용한 세 가지 공간정보는 첫째, 25 cm 급 정사영상과 1:1000 수치지형도 기반 DEM (Digital Elevation Model), 둘째, 모바일매핑시스템(Mobile Mapping System, MMS)으로 취득한 점군 데이터, 셋째, MMS 데이터와 UAV 데이터를 융합하여 만든 하이브리드 점군 데이터이다. 세 가지 공간정보로부터 취득한 GCP를 이용하여 각각에 대하여 UAV 정사영상과 DSM (Digital Surface Model, DSM)을 생성하였다. 생성된 3가지 결과를 현장 RTK-GNSS 측량으로 취득한 검사점과 비교하여 3차원 위치 정확도평가를 진행하였다. 실험결과, 세 번째 경우인 MMS와 UAV를 융합한 하이브리드 점군 데이터를 GCP로 사용하였을 때, UAV 정사영상과 DSM의 최종 정확도가 수평방향의 RMSE는 8.9 cm, 수직방향의 RMSE는 24.5 cm로 가장 높게 나타났다. 또한, 현장 측량을 대체하기 위해 활용한 공간정보로부터 취득한 GCP의 분포는 수평 위치 정확도 보다 수직 위치 정확도에 더 많은 영향을 미치는 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.482-486
• /
• 2000

The purpose of the present study was first, to evaluate the relationship between composite surface conversion and surface discoloration, second, to know if there was difference in surface discoloration between celluloid-strip-finished composite surface and polished surface. In addition, the discoloration of composite surface was also evaluated with visual inspection or digital camera with high resolution monitor, Z100, Tetric Ceram, Spectrum, and Aelitfil were used. The composite surfaces were celluloid-strip finished (group 1), polished (group 2), celluloid-strip finished under nitrogen gas purging (group 3) or only light cured without finishing or polishing under nitrogen gas purging (group 4). The microhardness of each samples were also measured in each group. The samples of each group were also divided into 4 subgroup whether they were immediately placed in disclosing solution (0.2% Elythrosin, pH 7.0) (subgroup1), 1 day after light curing(subgroup 2), 3day after light curing(subgroup 3) or 7 day after light curing(subgroup 4). The computer controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$). The amounts of color difference were compared. The results were as follows; 1. There was no difference in discoloration between celluloid strip finished composite surface and polished surface. 2. The samples discolored more when they were placed in disclosing solution immediately after polymerization than other groups. 3. When the samples were light cured under nitrogen gas purging and without polishing process, they discolored more than other groups even though they showed higher micro hardness. 4. With visual inspection or digital camera, only a limited information was available in detecting composite surface discoloration.

• 대한기계학회논문집B
• /
• 제22권3호
• /
• pp.373-385
• /
• 1998

The local Nusselt numbers have been measured for a round turbulent jet impinging on the convex surface with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured to within .+-.0.25 deg. C accuracy using liquid crystal and a digital color image processing system. The experiments were made for the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 6 to 10, the dimensionless surface curvature (d/D) 0.056, and the various rib types (height(d$_{1}$) from 1 to 2 mm, pitch (p) from 6 to 32 mm). It was found that the average Nusselt numbers on the convex surface with rib are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface. In addition, we compared the results by the steady-state method using the gold-film Intrex with those by the transient method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.83-86
• /
• 2005

This paper presents a method for point-based 3D building reconstruction using LiDAR data and digital map. The proposed method consists of three processes: extraction of building roof points, identification of roof types, and 3D building reconstruction. After extracting points inside the polygon of building, the ground surface, wall and tree points among the extracted points are removed through the filtering process. The filtered points are then fitted into the flat plane using ODR(Orthogonal Distance Regression). If the fitting error is within the predefined threshold, the surface is classified as a flat roof. Otherwise, the surface is fitted and classified into a gable or arch roof through RMSE analysis. Based on the roof types identified in automated fashion, the 3D building reconstruction is performed. Experimental results showed that the proposed method classified successfully three different types of roof and that the fusion of LiDAR data and digital map could be a feasible method of modelling 3D building reconstruction.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.451-458
• /
• 2012

The voluntary EMG (vEMG) signal from electrically stimulated muscle is very useful for feedback control in functional electrical stimulation. However, the recorded EMG signal from surface electrodes has unwanted stimulation artifact and M-wave as well as vEMG. Here, we propose an event-synchronous adaptive digital filter for the suppression of stimulation artifact and M-wave in this application. The proposed method requires a simple experimental setup that does not require extra hardware connections to obtain the reference signals of adaptive digital filter. For evaluating the efficiency of this proposed method, the filter was tested and compared with a least square (LS) algorithm using previously measured data. We conclude that the cancellation of both primary and residual stimulation artifacts is enhanced with an event-synchronous adaptive digital filter and shows promise for clinical application to rehabilitate paretic limbs. Moreover because this algorithm is far simpler than the LS algorithm, it is portable and ready for real-time application.

• 신재생에너지
• /
• 제9권2호
• /
• pp.15-22
• /
• 2013

The solar energy are an infinite source of energy and a clean energy without secondary pollution. The global solar energy reaching the earth's surface can be calculated easily according to the change of latitude, altitude, and sloped surface depending on the amount of the actual state of the atmosphere and clouds. The high-resolution solar-meteorological resource map with 1km resolution was developed in 2011 based on GWNU (Gangneung-Wonju National University) solar radiation model with complex terrain. The very high resolution solar energy map can be calculated and analyzed in Seoul and Eunpyung with topological effect using by 1km solar-meteorological resources map, respectively. Seoul DEM (Digital Elevation Model) have 10m resolution from NGII (National Geographic Information Institute) and Eunpyeong new town DSM (Digital Surface Model) have 1m spatial resolution from lidar observations. The solar energy have small differences according to the local mountainous terrain and residential area. The maximum bias have up to 20% and 16% in Seoul and Eunpyung new town, respectively. Small differences are that limited area with resolutions. As a result, the solar energy can calculate precisely using solar radiation model with topological effect by digital elevation data and its results can be used as the basis data for the photovoltaic and solar thermal generation.