• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.529-534
• /
• 2004

The increasing need and use of 3D GIS particularly in urban areas has produced growing attention on building reconstruction. Nowadays, the use of close-range data for building reconstruction has been intensively emphasized since they can provide higher resolution and more complete coverage than airborne sensory data. We developed a fusion approach for building reconstruction from both points and images. The proposed approach was then applied to reconstructing a building model from real data sets acquired from a large existing building. Based on the experimental results, we assured that the proposed approach cam achieve high resolution and accuracy in building reconstruction. The proposed approach can effectively contribute in developing an operational system producing large urban models for 3D GIS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.77-79
• /
• 2016

In this paper, we consider hierarchical modulation (HM), which has been widely exploited in digital broadcasting systems. In HM, each independent data stream is mapped to the modulation symbol with different transmission power and normalization factors of conventional M-QAM cannot be used. In this paper, we derive the method and formula for exact normalization factor of three-level hierarchical 64QAM.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.407-407
• /
• 2002

The most widespread techniques for DEM generation are stereoscopy for optical sensor images and interfereometry for SAR images. These techniques suffer from certain sensor and processing limitations, which can be overcome by the synergetic use of both sensors and DEMs respectively. In this paper, different strategies for fusing SAR and optical data are combined to derive high quality DEM products. The filtering techniques, which take advantage of the complementary properties of SAR and stereo optical DEMs, will be applied for the fusion process. By taking advantage of the fact that errors of the DEMs are of different nature using the filtering technique, affected part are filtered and replaced by those of the counterpart and is tested with two sets of SPOT and ERS DEM, resulting in a remarkable improvement in DEM. for the analysis of results, the reference DEM is generated from digital base map(1:5000).

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.397-402
• /
• 2020

Hologram can be categorized into analog and digital hologram but there's a clear limitation in expensive equipment and content realization for ordinary people to realize. In addition, it's required to conduct study on hologram contents with interaction added, escaping out of exiting stable format like endlessly repetitive contents or passive view through specific video. Therefore, this article aims to suggest fusion image system, especially focusing on floating hologram among similar holograms. Eight elements of hologram interaction are as follows: height of camera in a three-dimensional space, interval between 3D model, overlapped model, scale, animation, position, color and 3D model change. For the floating hologram, the audience can control by themselves in real time, the popular, active hologram contents-making methodology is suggested by making the best use of fusion image system and making floating hologram easily without using expensive hologram equipment. The image system developed in actual exhibition and feedback should be complemented to develop better hologram image system.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.135-140
• /
• 2018

This study aimed to determine the changes of awareness and preference of dental hygienists according to the experience of using a digital intraoral scanner through a convergence study. Data collected by an online survey for dental hygienists in Busan, Gyeongnam and Gyeongbuk were analyzed by SPSS 24.0 program. When dental hygienists had an experience of using a digital intraoral scanner, the awareness and preference of digital intraoral scanners were significantly higher. The experience of using a digital intraoral scanner showed a positive correlation with the clinical application experience of digital intraoral scanners; the clinical application experience of digital intraoral scanners, with the awareness of digital intraoral scanners; and the awareness of digital intraoral scanners, with the preference of digital intraoral scanners. In conclusion, the dental hygienist's experience in clinical application of digital intraoral scanners is expected to increase the awareness and preference, resulting in the improvement of dental hygienists' work ability. Therefore, it is believed that continuous education and learning about digital oral scanners are needed.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.3
• /
• pp.67-80
• /
• 2007

Digital convergence, defined as the creative fusion of once-independent technologies and service, is getting more attention recently. Interruptions among internal functions happen frequently in digital convergence products because many functions that were in separate products are merged into a single product. Multi-tasking and multi-modality are two distinctive features of interruption in digital convergence products, but their impacts to the user have not been investigated yet. This study conducted a controlled experiment to investigate the impacts of multi-tasking and multi-modality on the subjective satisfaction and objective performance of digital convergent products. The study results indicate that multi-tasking and multi-modality have substantial effects individually as well as together. The paper ends with practical and theoretical implications of study results as well as research limits and future research.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.169-185
• /
• 2016

Recently mean stand height has been added as new attribute to forest type maps, but it is often too costly and time consuming to manually measure 9,100,000 points from countrywide stereo aerial photos. In addition, tree heights are frequently measured around tombs and forest edges, which are poor representations of the interior tree stand. This work proposes an estimation of mean stand height using an image-based point cloud, which was extracted from stereo aerial photo with FUSION S/W. Then, a digital terrain model was created by filtering the DSM point cloud and subtracting the DTM from DSM, resulting in nDSM, which represents object heights (buildings, trees, etc.). The RMSE was calculated to compare differences in tree heights between those observed and extracted from the nDSM. The resulting RMSE of average total plot height was 0.96 m. Individual tree heights of the whole study site area were extracted using the USDA Forest Service's FUSION S/W. Finally, mean stand height was produced by averaging individual tree heights in a stand polygon of the forest type map. In order to automate the mean stand height extraction using photogrammetric methods, a module was developed as an ArcGIS add-in toolbox.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.11-17
• /
• 2020

This paper proposed the design of a new window signage system architecture, which utilized a window of a building, with attached LED for visible light communication. In this paper, the proposed method using the LED strip to transmit light data and receive the data through a HMD with a smart device camera. The LED strip attached to the existing building window, as a part of semi-transparent signage. Semi-transparent signage based on a controllable LED strip-modules and attached to the window used to provide entertainment contents and the information service to people through optical camera communication (OCC) as well. Also, this work suggests using the camera supplied Head Mounted Device (HMD) as an OCC receiver. The LED attached window signage system structure described in this paper can be utilized in various buildings infrastructure like house, shopping areas, industrial building, etc.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.203-209
• /
• 2016

Among the various fields in the communications, navigation, and surveillance/air traffic management (CNS/ATM) scheme, the surveillance field, which includes an automatic dependent surveillance - broadcast (ADS-B) system and a multilateration (MLAT) system, is implemented using satellite and digital communications technology. These systems provide better performance than radar, but still incur position error. To reduce the error, we propose an efficient information fusion method called the reweighted convex combination method for ADS-B and MLAT systems. The reweighted convex combination method improves aircraft tracking performance compared to the original convex combination method by readjusting the weights given to these systems. In this paper, we prove that the reweighted convex combination method always provides better performance than the original convex combination method. Performance from the fusion of ADS-B and MLAT improves an average of 51.51% when compared to the original data.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.6
• /
• pp.370-374
• /
• 2008

Objective : Aim of study was to find a proper method for assessing subsidence using a radiologic measurement following anterior cervical discectomy and fusion (ACDF) with stand-alone polyetheretherketone (PEEK), $Solis^{TM}$ cage. Methods : Forty-two patients who underwent ACDF with $Solis^{TM}$ cage were selected. With a minimum follow-up of 6 months, the retrospective investigation was conducted for 37 levels in 32 patients. Mean follow-up period was 18.9 months. Total intervertebral height (TIH) of two fused vertebral bodies was measured on digital radiographs with built-in software. Degree of subsidence (${\Delta}TIH$) was reflected by the difference between the immediate postoperative and follow-up TIH. Change of postoperative disc space height (CT-MR ${\Delta}TIH$) was reflected by the difference between TIH of the preoperative mid-sagittal 2D CT and that of the preoperative mid-sagittal T1-weighted MRI. Results : Compared to preoperative findings, postoperative disc height was increased in all cases and subsidence was observed only in 3 cases. For comparison of subsidence and non-subsidence group, TIH and CT-MR ${\Delta}TIH$ of each group were analyzed. There was no statistically significant difference in TIH and CT-MR ${\Delta}TIH$ between each group at 4 and 8 weeks, but a difference was observed at the last follow-up TIH (p=0.0497). Conclusion : ACDF with $Solis^{TM}$ cage was associated with relatively good radiologic long-term results. Fusion was achieved in 94.5% and subsidence occurred in 8.1% by the radiologic assessment. Statistical analysis reveals that the subsidence seen later than 8 weeks after surgery and the development of subsidence does not correlate statistically with the change of the postoperative disc space height.