• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.583-586
• /
• 2011

In this paper, subthreshold swing characteristics have been presented for double-gate MOSFETs, using the analytical model based on series form of potential distribution. Subthreshold swing is very important factor for digital devices because of determination of ON and OFF. In general, subthreshold swings have to be under 100mV/dec. The channel length $L_g$ is varied from 30nm to 100nm, and channel thickness $t_{si}$ from 15 to 20nm according to channel length, and oxide thickness 5nm to investigate subthreshold swing. The doping of channel is fixed with $10^{16}cm^{-3}$ p-type. The results show good agreement with numerical simulations, confirming this model.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1635-1645
• /
• 2015

This study proposes high-performance voltage controller design that employs a capacitor current control model for single-phase stand-alone inverters. The single-phase stand-alone inverter is analyzed via modeling, which is then used to design the controller. A design methodology is proposed to maximize the bandwidth of the feedback controller. Subsequently, to compensate for the problems caused by the bandwidth limitations of the controller, an error transfer function that includes the feedback controller is derived, and the stability of the repetitive control scheme is evaluated using the error transfer function. The digital repetitive controller is then implemented. The simulation and experimental results show that the performance of the proposed controller is high in a 1.5 kW single-phase stand-alone inverter prototype.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.3
• /
• pp.53-61
• /
• 2002

In this paper, the authors proposed the digital audio watermarking algorithm for a high quality audio. Today, the digital watermark is used to confirm to the digital copyright protection, not only the digital image but the digital audio study is an activeness in the digital watermarking area. Especially, the watermark insertion in the digital audio area affects deeply not only a robustness but the audio quality of the watermarked audio data. Generally, the audio watermark is inserted in the frequence domain after FFT, the quality of audio data is affected by the watermark insertion. Thus, a high quality audio to be maintained at the same time, the study related a inserting of the robustness watermark happened to a hot issue. In this paper, the authors proposed the digital audio watermarking algorithm using psychoacoustic model and MDCT/IMDCT (Modified Discrete Cosine Transform/Inverse Modified Discrete Cosine Transform). In the proposed scheme, the authors experimented the stereo audio file with 44.1KHz, and 128kbps for the audio watermarking algorithm proposed. When the audio data is processed by MDCT, the watermark is able to insert into the frequence domain with 256, 1024 and 2048 interval. In case of 50㎳ RMS window, it was confirmed that the difference between the original audio data and the watermarked audio data of RMS power is 0.8㏈.

• CDE review
• /
• v.11 no.2
• /
• pp.9-14
• /
• 2005

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.977-982
• /
• 2017

Recently, the effort that converge the sport and ICT continues together with developing ICT. The game is a representative example. The digital sport is developing as mixed type that are composed with sport and digital such as screen golf and screen bowling. The addiction problem exist in the digital sport like the addiction problem exist in general sport. In this paper, we propose the addiction model in the digital sport as fractional-order. We represent time series and phase portrait for nonlinear behavior from proposed fractional-order model and we confirms the difference between them.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.849-858
• /
• 2009

Risk caused by safety-critical instrumentation and control (I&C) systems considerably affects overall plant risk. As digitalization of safety-critical systems in nuclear power plants progresses, a risk model of a digitalized safety system is required and must be included in a plant safety model in order to assess this risk effect on the plant. Unique features of a digital system cause some challenges in risk modeling. This article aims at providing an overview of the issues related to the development of a static fault-tree-based risk model. We categorize the complicated issues of digital system probabilistic risk assessment (PRA) into four groups based on their characteristics: hardware module issues, software issues, system issues, and safety function issues. Quantification of the effect of these issues dominates the quality of a developed risk model. Recent research activities for addressing various issues, such as the modeling framework of a software-based system, the software failure probability and the fault coverage of a self monitoring mechanism, are discussed. Although these issues are interrelated and affect each other, the categorized and systematic approach suggested here will provide a proper insight for analyzing risk from a digital system.

• Computers and Concrete
• /
• v.3 no.6
• /
• pp.423-437
• /
• 2006

Stress wave propagation through concrete is simulated by finite element analysis. The concrete medium is modeled as a homogeneous material with smeared properties to investigate and establish the suitable finite element analysis method (explicit versus implicit) and analysis parameters (element size, and solution time increment) also suitable for rigorous investigation. In the next step, finite element analysis model of the medium is developed using a digital image processing technique, which distinguishes the mortar and aggregate phases of concrete. The mortar and aggregate phase topologies are, then, directly mapped to the finite element mesh to form a heterogeneous concrete model. The heterogeneous concrete model is then used to simulate wave propagation. The veracity of the model is demonstrated by evaluating the intrinsic parameters of nondestructive ultrasonic pulse velocity testing of concrete. Quantitative relationships between aggregate size and testing frequency for nondestructive testing are presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.76-81
• /
• 1998

This paper presents an on-line scheme for parameter estimation of continuous-time systems, based on the model adjustment technique and the genetic algorithm technique. To deal with the initialisation and unmeasurable signal problems in on-line parameter estimation of continuous-time systems, a discrete-time model is obtained for the linear differential equation model and approximations of unmeasurable states with the observable output and its time-delayed values are obtained for the nonlinear state space model. Noisy observations may affect these approximation processes and degrade the estimation performance. A digital prefilter is therefore incorporated to avoid direct approximations of system derivatives from possible noisy observations. The parameters of both the model and the designed filter are adjusted on-line by a genetic algorithm, A set of simulation works for linear and nonlinear systems is carried out to demonstrate the effectiveness of the proposed method.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.411-420
• /
• 2005

World leading company and research centers have invested much cost and effort into a PLM and digital manufacturing field to obtain their own competitiveness. We have been trying to apply a digital manufacturing, especially simulation to ship production process as a part of PLM implementation for a shipyard. A shipbuilding production system and processes have a complexity and a peculiarity different from other kinds of production systems. So, new analysis and modeling methodology is required to implement digital shipyard. which is a digital manufacturing system for a shipbuilding company. This paper suggests an analysis and simulation modeling methodologies for an implementation of a digital shipyard. New methodologies such as a database-merged simulation, a distributed simulation, a modular simulation with a model library and a 3-tire simulation framework are developed.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.6
• /
• pp.1082-1089
• /
• 2012

Objectives : The aim of this study was to determine the accuracy of digitized stone models, impression materials compared to the master model and the reliability of the computer aided analysis. Methods : A master model(500B-1, Nissin dental product, Japan) with the prepared lower full arch tooth was used. Ten vinyl polysiloxane impressions(Examix$^{(R)}$, GC Industrial Corp, Japan) of master model were taken and type IV stone(aesthetic-base gold$^{(R)}$, Dentona, Germany) were poured in stone models. The linear distance between the reference points were measured and analyzed on the Delcam Copycad$^{(R)}$(Delcam plc, UK). The t-student test for paired samples was used for statistical analysis. Results : The mean differences to master model for stone model and impression material were 0.11~0.19mm, and 0.19~0.29mm, respectively. There were statistical differences in dimensional accuracy for full arch impression between master model and stone model/impressions(p<.05). Conclusions : Two different scanning methods showed clinically acceptable accuracy of full arch digital impression produced by them. These results will have to be confirmed in further clinical studies.