• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.277-292
• /
• 2020

The purpose of this study is to propose the possibility of precise surface sedimentary facies classification and a more accurate classification method by generating the large-scale map of surface sedimentary facies based on UAV data and object-based image analysis (OBIA) for Hwang-do tidal flat in Cheonsu bay. The very high resolution UAV data extracted factors that affect the classification of surface sedimentary facies, such as RGB ortho imagery, Digital elevation model (DEM), and tidal channel density, and analyzed the principal components of surface sedimentary facies through statistical analysis methods. Based on principal components, input data to be used for classification of surface sedimentary facies were divided into three cases such as (1) visible band spectrum, (2) topographical elevation and tidal channel density, (3) visible band spectrum and topographical elevation, tidal channel density. The object-based image analysis classification method was applied to map the classification of surface sedimentary facies according to conditions of input data. The surface sedimentary facies could be classified into a total of six sedimentary facies following the folk classification criteria. In addition, the use of visible band spectrum, topographical elevation, and tidal channel density enabled the most effective classification of surface sedimentary facies with a total accuracy of 63.04% and the Kappa coefficient of 0.54.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.41-50
• /
• 2008

Recent progress in state-of-the-art geospatial information technologies such as digital mapping, LiDAR(Light Detection And Ranging), and high-resolution satellite imagery provides various data sources fer Digital Elevation Model(DEM). DEMs are major source to extract elements of the hydrological terrain property that are necessary for efficient watershed management. Especially, watersheds extracted from DEM are important geospatial database to identify physical boundaries that are utilized in water resource management plan including water environmental survey, pollutant investigation, polluted/wasteload/pollution load allocation estimation, and water quality modeling. Most of the previous studies related with watershed extraction using DEM are mainly focused on the hydrological elements analysis and preprocessing without considering grid size of the DEMs. This study aims to analyze accuracy of the watersheds extracted from DEMs with various grid sizes generated by LiDAR data and digital map, and appropriate preprocessing methods.

• KCID journal
• /
• v.14 no.1
• /
• pp.80-88
• /
• 2007

The Shuttle Radar Topography Mission (SRTM) obtained elevation data on a near-global scale to generate the most complete high-resolution digital topographic database of Earth. SRTM consisted of a specially modified radar system that flew onboard the Space shuttle SRTM consisted of a specially modified radar system that flew onboard the Space Shuttle Endeavour during an 11-day mission on February 2000. Since 2004, in a GLCF (Global Land Cover Facility, http;//glcf.umiacs.umd.edu/) web-site, products of SRTM including 1Km and 90m resolutions for outside US and a 30m resolution for the US have been provided. This study is to assess the accuracy of SRTM-DEM in comparing with NGIS-DEM generated from NGIS digital topographic map(1:25,000) in Guem river watershed. For the Geum river watershed, SREM-DEM elevation ranged from 0 to 1,605m and NGIS-DEM ranged from 6 to 1,610m, and the average elevation of SRTM-DEM was 226.7m and 218.9m for NGIS-DEM, respectively. NGIS-DEM was subtracted from SRTM in three zones -Zone I (0~100m), Zone II (100~400m), Zone III (over 400m)- to estimate difference between SRTM and NGIS-DEM. As the results, the differences of these DEM were 5.2m (11.6%) in Zone I, 8.8m (3.8%) in Zone II, 12.5m (2.1%) in Zone III. Although there were differences between SRTM-DEM and NGIS-DEM, SREM-DEM would be possible to be utilized as DEM data for the region where DEM is not prepared.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.3
• /
• pp.33-40
• /
• 2007

This study is to grasp and analyse the temporal and spatial distribution of record-breaking heavy snowfall rarely occurred in the middle and southwest region of South Korea during March of 2004 and December of 2005 respectively. Snow cover area was extracted using the channels 1, 3 and 4 of NOAA AVHRR images and the snow depth distribution was spatially interpolated using snowfall data of meteorological stations. Using administration boundary and Digital Elevation Model from 1:5,000 NGIS digital map, the snowfall impact was assessed spatially and compared with the reports at that time. The damaged area by heavy snowfall over 15 cm snow depth could be identified successfully within the spatial extent of snowfall area extracted by NOAA AVHRR image.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.110-113
• /
• 2006

This study is to grasp and analyse the temporal and spatial distribution of record-breaking heavy snowfall rarely occurred in the middle and southwest region of South Korea during March of 2004 and December of 2005 respectively. Snow cover area was extracted using the channels 1, 3 and 4 of NOAA AVHRR images and the snow depth distribution was spatially interpolated using snowfall data of meteorological stations. Using administration boundary and Digital Elevation Model from 1:5,000 NGIS digital map, the snowfall impact was assessed spatially and compared with the reports at that time.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.157-169
• /
• 2010

In this study, the applicability of SRTM(The Shuttle Radar Topography Mission) DEM(Digital Elevation Model) which is one of the remotely sensed shuttle's radar digital elevation was tested for use as the input data in a grid-based rainfall-runoff model. The SRTM DEM and digital topographic map derived DEM(TOPO DEM) were building with 500m spatial resolution for the Chungju-Dam watershed which located in the middle east of South Korea, and stream-burning method was applied to delineate the proper flow direction for model application. Similar topographical characteristics were shown as a result of comparing elevation, flow-direction, hydrological slope, number of watershed cell, and profile between SRTM DEM and TOPO DEM. Two DEMs were tested by using a grid-based rainfall-runoff model named KIMSTORM with 6 storm events. The results also showed no significant differences in average values of relative error for both peak runoff(0.91 %) and total runoff volume(0.29 %). The results showed that the SRTM DEM has applicability like TOPO DEM for use in a grid-based rainfall-runoff modeling.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.40-48
• /
• 2011

The purpose of this study is to contribute enhancing the accuracy of viewshed analysis through the explanation for an analysis method of viewshed analysis using GIS. According to previous studies, the visible area using digital terrain in viewshed analysis depends on a visible interest area, scale of terrain, spatial resolution and surface data. In this study, we used trend analysis and RMSE analysis in order to find the effect of a visible interest area, scale of terrain, etc in viewshed analysis. Results of this study are as follows. First, the result of viewshed analysis depends on a visible interest area, scale of terrain, spatial resolution, surface data such as previous studies. Second, the results in forest area are reliable than those of flat area in terms of a visible interest area. Third, the results based on raster grid data are stable than those of TIN(triangulated irregular network) in terms of input surface data. Fourth, according to the result of trend and RMSE analysis, the spatial resolution for analysis is differently applied to different scales digital terrain map in viewshed analysis. In detail, it is desirable that the spatial resolution is set less than 10m(in the case of 1/1,000 digital terrain map), 20m(in the case of 1/5,000 map), 30m(1/25,000 map).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.393-400
• /
• 2009

Recently demand for the 3D modeling technology to reconstruct real world is getting increasing. However, existing geospatial data are mainly based on the 2D space. In addition, most of the geospatial data provide geometric information only. In consequence, there are limits in various applications to utilize information from those data and to reconstruct the real world in 3D space. Therefore, it is required to develop efficient 3D mapping methodology and data for- mat to establish geospatial database. Especially digital elevation model(DEM) is one of the essential geospatial data, however, DEM provides only spatially distributed 3D coordinates of the natural and artificial surfaces. Moreover, most of DEMs are generated without considering terrain properties such as surface roughness, terrain type, spatial resolution, feature and so on. This paper suggests adaptive and flexible geospatial data format that has possibility to include various information such as terrain characteristics, multiple resolutions, interpolation methods, break line information, model keypoints, and other physical property. The study area was categorized into mountainous area, gently rolling area, and flat area by taking the terrain characteristics into account with respect to terrain roughness. Different resolutions and interpolation methods were applied to each area. Finally, a 3D digital map derived from aerial photographs was integrated with the geospatial data and visualized.

• Korean Journal of Remote Sensing
• /
• v.9 no.2
• /
• pp.21-34
• /
• 1993

Digitalized topographic information is necessary for many areas such as landscape analysis, civil engineering planning and design, and geographic information systems. It can also be used in flight simulator and automatic navigation of unmanned plane if it is stored in computer in relevant format. Topographic information is coded with various symbols including contour lines, and is analyzed by trained personnels. The information should be stored in computer for automatic analysis, but it requires a lot of time and manpower to enter the contours using manual input devices such as digitizing tablet. This paper deals with automatic extraction and reconstruction of 3D topographic information from 2D terrain map. Several algorithms were developed in this work including contour segment finding algorithm and contour segment linking algorithm. The algorithm were tested using real 2D terrain map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.99-105
• /
• 2007

This research is about applying aerial photos to three-dimensional simulation of road design. Instead of existing road design approach using digital map, which inexactly represent some part of topography and landmarks, digital aerial photos are applied to three-dimensional road design to address such inexactness of the map. First of all, ortho-photos are made using aerial photos, and a digital elevation model is created by extracting DEM. Then, by applying the coordinates practically using in planar design to three-dimensional approach, this model will be much helpful in the analyses of road route and viewscape. In addition, through the use of Virtual GIS, many evaluation factors such as urban design, flora, soil, water channel or road shape, flood plan are used for examination, and the effectiveness of applying three-dimensional simulation based on such route design standard is to be reviewed. In this paper, a basic research about three-dimensional design of structures is performed, and through the three-dimensional design, some effective determination to decision-making was carried out. Hereafter, it appears some research regarding environment-friendly construction and design should be followed.