• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.217-223
• /
• 2009

In order to decrease the power consumption in Embedded Linux environment based on XScale PXA255, We produce the device driver of DFS(Dynamic Frequency Scaling) technique, design and implement the middleware DFM(Dynamic Frequency Management) to scale the power of embedded target board with porting this device drive, suggest the method to reduce the Embedded system's power consumption.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.266-276
• /
• 2010

In the present study, an optical system is proposed for maskless lithography using a digital micromirror device (DMD). The system consists of an illumination optical system, a DMD, and a projection lens system. The illumination optical system, developed for 95% uniformity, is composed of fly's eye lens plates, a 405 nm narrow band pass filter (NBPF), condensing lenses, a field lens and a 250W halogen lamp. The projection lens system, composed of 8 optical elements, is developed for 4 ${\mu}m$ resolution. The proposed system plays a role of an optical engine for PCB and/or FPD maskless lithography. Furthermore, many problems arising from the presence of masks in a conventional lithography system, such as expense and time in fabricating the masks, contamination by masks, disposal of masks, and the alignment of masks, may be solved by the proposed system. The proposed system is verified by lithography experiments which produce a line pattern with the resolution of 4 ${\mu}m$ line width.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1006-1008
• /
• 2003

Position controls are very important in semiconductor manufacturing devices, machine tools precision measuring instruments, etc. to measure the distance of movement of moving objects in minute units and the accuracy of measurement for the moving distance in these devices affect the performance of the whole devices. Therefore, in those precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. In this paper, a novel encoder of digital and analog hybrid type is proposed. It is shown that from this experiment a high-resolution angle measurement device can be designed by a low cost incremental encoder.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.219-228
• /
• 2018

The utilization of NFC has been continuously increasing due to the spread of smart phones and the development of short-range wireless communication networks. However, it has been suggested that stability and security of convenient NFC short-range wireless communications can be unstable and problematic. The unstable causes for NFC are the lack of security technologies for NFC, the controversy about personal information infringement, and the lack of social awareness on security breach against data settlement. NFC service can be conveniently used by simply touching other NFC devices and NFC tags through the NFC device. This thesis analyzes that NFC authentication technology, which is convenient for user are one of the unstable causes of security of NFC. This thesis suggest that ministry should research countermeasures and promote how users can use NFC safely. It also suggests that users should have awareness when they use payment and authentication service through NFC to prevent from security threat.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.71-78
• /
• 2022

Wearable devices have the potential to revolutionize future medical diagnostics and personal healthcare. The integration of biosensors into scalable form factors allow continuous and noninvasive monitoring of key biomarkers and various physiological indicators. However, conventional wearable devices have critical limitations owing to their rigid and obtrusive interfaces. Recent developments in functional biocompatible materials, micro/nanofabrication methods, multimodal sensor mechanisms, and device integration technologies have provided the foundation for novel skin-interfaced bioelectronics for advanced and user-friendly wearable devices. Nonetheless, it is a great challenge to satisfy a wide range of design parameters in fabricating an authentic skin-interfaced device while maintaining its edge over conventional devices. This review highlights recent advances in skin-compatible materials, biosensor performance, and energy-harvesting methods that shed light on the future of wearable devices for digital health and personalized medicine.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.784-788
• /
• 2012

In this paper, a high-performance optical gating in a junction device based on a vanadium dioxide dioxide ($VO_2$) thin film grown by a sol-gel method was experimentally demonstrated by directly illuminating the $VO_2$ film of the device with an infrared light at ~1554.6 nm. The threshold voltage of the fabricated device could be tuned by ~76.8 % at an illumination power of ~39.8 mW resulting in a tuning efficiency of ~1.930 %/mW, which was ~4.9 times as large as that obtained in the previous device fabricated using the $VO_2$ thin film deposited by a pulsed laser deposition method. The rising and falling times of the optical gating operation were measured as ~50 ms and ~200 ms, respectively, which were ~20 times as rapid as those obtained in the previous device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1201-1206
• /
• 2014

Retail stores are mostly relying their product management on handwriting. This handwriting management is limited and poor at managing the status of stocking and releasing. Also, to confirm real-time product status, additional statistic system is required. POS system developed to overcome foresaid problems is operating only in big and special stores because of expensive price and limited space. Therefore, new automated management system which has low installation price needs to be developed and adopted instead of handwriting management system. In this paper, we developed real-time product management system which can manage the products in retail stores by utilizing NFC function in mobile device.

• ETRI Journal
• /
• v.16 no.4
• /
• pp.1-11
• /
• 1995

A GaAs power metal semiconductor field effect transistor (MESFET) operating at a voltage as low as 3.3V has been developed with the best performance for digital handheld phone. The device has been fabricated on an epitaxial layer with a low-high doped structure grown by molecular beam epitaxy. The MESFET, fabricated using $0.8{\mu}m$ design rule, showed a maximum drain current density of 330 mA/mm at $V_{gs}$ =0.5V and a gate-to-drain breakdown volt-age of 28 V. The MESFET tested at a 3.3 V drain bias and a 900 MHz operation frequency displayed an output power of 32.5-dBm and a power added efficiency of 68%. The associate power gain at 20 dBm input power and the linear gain were 12.5dB and 16.5dB, respectively. Two tone testing measured at 900.00MHz and 900.03MHz showed that a third-order intercept point is 49.5 dBm. The power MESFET developed in this work is expected to be useful as a power amplifying device for digital hand-held phone because the high linear gain can deliver a high power added efficiency in the linear operation region of output power and the high third-order intercept point can reduce the third-order intermodulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.463-466
• /
• 2005

While recent display devices are becoming light and slim, the size of a screen is especially the important issue in the field of display devices. Furthermore, it is also required that the projection TV, a large screen display device, be able to represent higher resolutions as the digital broadcasting is set off. In order to realize high resolutions in a DLP projection TV, the number of pixel on DMD should be increased. However, a large number of pixels make it difficult to realize resulting small sized pixels and this cause the increase in cost. Therefore, we propose a simple and improved pixel enhancement actuator using the existing DMD by offsetting half pixels repeatedly in the vertical direction.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.146-160
• /
• 2014

The purpose of this study is to suggest the goal and potential contributors of public fund for content industry in digital media environment with regard to the new content fund which Korean government has tried to establish since 2013. The study focuses on value transfer toward the digital content distributors as stressed by the French government introducing Culture tax on smart device. As the concentration of added-value poses a problem hampering the co-evolvement of total ecosystem, the goal of new content fund should focus on financing and digitalization of content, which should be financially contributed by content service providers and smart device manufacturers.