• 한국수산과학회지
• /
• 제30권1호
• /
• pp.16-30
• /
• 1997

Application of digital filter to the wave analysis is studied using the observed data by wave gauge. Sea wave data obtained from wave gauge always include long wave frequency components. In order to estimate the sea wave parameters, we must re-analyzed wave data by using a digital filter and the concept of mean sea level correction method. By the wave by wave analysis and spectral methods, sea wave parameters on the basis of wave data obtained by the conventional method and digital filter are compared. The best-fitted design filter determined by the necessary conditions of frequency responses, can be obtained by calculating various transfer functions. Thus, to get the best the digital filter design, both Butterworth filter and Savitzky-Golay filter of digital filter are used in the frequency and time domain, respectively. Three cases of observation wave data are calculated by applying digital filter. The components of different frequency bands in the surf zone are coexisted in three cases. The wave data for wind wave components is computed using the digital filter the surf zone and off-surf zone, and based on the filtered data, wave parameters are calculated by the spectral analysis and wave by wave analysis methods, respectively. As a results, when sea wave data observed by wave gauge are analyzed, the Savitzky-Golay method is recommended which can well appear cut-off frequency by experimental choosing filter length in the time domain. The better mean sea level correction method is the Butterworth filter in the frequency domain.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1983년도 추계학술발표회논문집
• /
• pp.56-60
• /
• 1983

There has been a great amount of interest in the design of digital filters with low sensitivity to coefficient variations. Especiaily the wave digital filter modeled after analog IC ladder filter has been studied to have low-cocfficient-sensitivity properties. This paper examined the design of the wave digital filter and how the sensitivity and roundoff noise porperty arises. As a result of computer simulation the implementation of the digital filter was possible with a lower coefficient word length comparing with the conventional cascade structure.

• 한국해안해양공학회지
• /
• 제16권3호
• /
• pp.171-177
• /
• 2004

디지털 영상을 이용한 새로운 파고계를 연구ㆍ개발하였으며 실험실의 조파 수조를 사용하여 검증하였다. 본 연구는 비디오 동영상이 1/15초의 일정한 간격으로 영상을 촬영하는 규칙성과 아날로그 영상에서 디지털 영상으로의 변환, 그리고 큰 용량의 저장 매체를 활용하였다. 본 파고계는 수면의 움직임에 따라 동일하게 움직이는 부이를 촬영한 영상에서 그 움직임을 자동으로 추출하는 방법으로 파고 관측을 하였으며 참값과 비교 검증하였다. 차후 개선 연구를 통하여 해안에 근접한 천해역에서 파랑 관측을 하는데 활용할 수 있을 것으로 보인다.

• 한국통신학회논문지
• /
• 제13권2호
• /
• pp.107-119
• /
• 1988

본 논문은 WDF(Wave Digital Filter)를 이용한 8-채널 필터뱅크를 구성하는 새로운 방법에 대하여 연구한 논문이다. 지로WDF(Branching WDF)의 상보성(Complementary)을 이용하여 필터뱅크를 구성하는 방법은 일반적인 재래식 방법보다 소요필터 수를 줄일 수 있으며 DSP 칩(Digital Signal Processor Chip) 구성시 많은 기억소자(Memory)수를 줄일 수 있다. 본 논문에서 제안된 8-채널 필터뱅크의 구성방법은 기존의 논문보다 필터 수를 줄일 수 있었으며, 제안된 방법의 타당성 조사를 위하여 컴퓨터 시뮬레이션한 결과 동작이 양호함을 확인하였다.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.7-15
• /
• 2003

A Digital Wave Tank simulation technique, based on a finite-difference method and a modified marker-and-cell (MAC) algorithm, is applied in order to investigate the characteristics of nonlinear Tsunami propagations and their interactions with a 2D sloping beach, Ohkushiri Island, and to predict maximum wove run-up around the island. The Navier-Stokes (NS) and continuity equation are governed in the computational domain, and the boundary values are updated at each time step, by a finite-difference time-marching scheme in the frame of the rectangular coordinate system. The fully nonlinear, kinematic, free-surface condition is satisfied by the modified marker-density function technique. The near shore Tsunami is assumed to be a solitary wave, and is generated from the numerical wave-maker in the developed Digital Wave Tank. The simulation results are compared with the experiments and other numerical methods, based on the shallow-water wave theory.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.231-239
• /
• 2003

A Digital Wave Tank simulation technique based on a finite-difference method and a modified marker-and-cell (MAC) algorithm is applied to investigate the characteristics of nonlinear Tsunami propagations and their interactions with a 2D sloping beach and Ohkushiri island, and to predict maximum wave run-up around the island. The Navier-Stokes (NS) and continuity equation are governed in the computational domain and the boundary values updated at each time step by a finite-difference time-marching scheme in the frame of rectangular coordinate system. The fully nonlinear kinematic free-surface condition is satisfied by the modified marker-density function technique. The Nearshore Tsunami is assumed to be a solitary wave and generated from the numerical wavemaker in the developed Digital Wave Tank. The simulation results are compared with the experiments and other numerical methods based on the shallow-water wave theory.

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.401-409
• /
• 2023

Oscillating water column (OWC) type wave power generator system is a power generation system that uses wave energy, a sustainable and renewable energy source. Irregular cycles and wave heights act as factors that make it difficult to secure generation efficiency of the wave power generator system. Recently, research for improving power generation efficiency is being conducted by applying digital twin technology to OWC type wave energy converter system. However, digital twin using sensor data can predict erroneous performance due to uncertainty in the sensor data. Therefore, this study proposes an uncertainty analysis method for sensor data which is used in digital twin to secure the reliability of digital twin prediction results. Uncertainty quantification considering sensor data characteristics and future uncertainty information according to uncertainty propagation were derived mathematically, and confidence interval estimation was performed based on the proposed method.

• 한국전산유체공학회지
• /
• 제11권4호
• /
• pp.90-100
• /
• 2006

A digital wave tank (DWT) simulation technique has been developed by authors to investigate the interactions of fully nonlinear waves with 3D marine structures. A finite-difference/volume method and a modified marker-and-cell (MAC) algorithm have been used, which are based on the Navier-Stokes (NS) and continuity equations. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique or the Level-Set (LS) technique developed for one or two fluid layers. In this paper, some applications for various engineering problems with free-surface are introduced and discussed. It includes numerical simulation of marine environments by simulation equipments, fully nonlinear wave motions around offshore structures, nonlinear ship waves, ship motions in waves and marine flow simulation with free-surface. From the presented simulations, it seems that the developed DWT simulation technique can handle various engineering problems with free-surface and reliably predict hydrodynamic features due to the fully-nonlinear wave motions interacting with such marine structures.

• 한국컴퓨터그래픽스학회논문지
• /
• 제29권3호
• /
• pp.21-31
• /
• 2023

본 논문에서는 디지털 휴먼을 활용한 버추얼 프로덕션에서의 촬영 사례를 소개한다. 본 촬영 사례는 LED를 활용한 버추얼 프로덕션의 시스템 구성과 디지털 휴먼을 활용한 효율적인 촬영 파이프라인을 다루고 있다. LED를 이용한 버추얼 프로덕션은 주로 LED에 배경을 투사하여 촬영하는 것과 달리 본 사례는 디지털 휴먼을 가상 배우로 사용하여 실제 배우와 소통하는 장면을 촬영하였다. 또한, 실제 배우와 디지털 휴먼의 대화 장면을 실시간 엔진을 이용하여 촬영하기 위해 음성과 텍스트 기반 한국어 립싱크 모션 자동 생성 기술을 적용하여 디지털 휴먼의 발화 애니메이션을 사전에 제작해 사용하였다. 우리는 실시간 엔진을 활용하여 LED 기반의 버추얼 프로덕션 환경에서 실제 배우와 디지털 휴먼을 이용한 짧은 드라마 콘텐츠를 제작함으로써 본 촬영 사례에 대하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.206-211
• /
• 1998

In audio techniques calculation of digital filters is accelerated considerably by use of wave variables instead of voltages and currents. The suitability of wave variables for digital simulation of power converters was investigated and the results are reported in this paper. The original method is described briefly, modelling of switches and diode rectifiers is presented, examples are given and the features of the method are discussed.