• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.10-17
• /
• 2010

Sensor nodes used in Geosensor network are resource limited and power constrained. So it is necessary to research on routing protocols to gather data by using energy efficiently. Wireless sensor networks collect data gathered from sensor nodes by transfering it to the sink using multihop. However, it has two problems. First, the existing works require unnecessary data transmission for choosing a proper parent node to transfer data. Secondly, they have a large number of data transmission because each sensor node has a different path. To solves the problems, we, in this paper, propose a designated path based data aggregation scheme for efficient energy management in WSNs. The proposed scheme can reduce unnecessary data transmission by pre-determining a set of paths and can enable all the sensor nodes to participate in gathering data by running them in round-robin fashion. We show from performance analysis that the proposed scheme is more energy efficient than the existing directed diffusion(DD) and the hierarchical data aggregation(HDA).

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.1
• /
• pp.39-53
• /
• 1998

The extraction rate of ginger from Korean-grown ginger root with supercritical carbon dioxide was measured as a function of flow rate of supercritical carbon dioxide, particle size, temperature and pressure. the extraction rate increased as the particle size decreased due to a decrease in the diffusion path. The extraction rate were independent of flow rate of supercritical carbon dioxide in a plot of ginger oil yield versus extraction time. This indicated that the extraction process is controlled by intraparticle diffusion within a particle of ginger root. In the case of temperature and pressure effect, the experimental results showed that the extraction rate decreased with an increase in temperature and increased with an increase in pressure.

• Applied Microscopy
• /
• v.45 no.1
• /
• pp.16-22
• /
• 2015

The reaction kinetics of the growth of Ni germanide in the Ni/Zr-interlayer/Ge system was investigated using isothermal in situ annealing at three different temperatures in a transmission electron microscope. The growth rate of Ni germanide in the Ni/Zr-interlayer/Ge system was determined to be diffusion controlled and depended on the square root of the time, with the activation energy of $1.04P{\pm}0.04eV$. For the Ni/Zr-interlayer/Ge system, no intermediate or intermixing layer between the Zr-interlayer and Ge substrate was formed, and thus the Ni germanide was formed and grew uniformly due to Ni diffusion through the diffusion path created in the amorphous Zr-interlayer during the annealing process in the absence of any intermetallic compounds. The reaction kinetics in the Ni/Zr-interlayer/Ge system was affected only by the Zr-interlayer.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.3
• /
• pp.200-205
• /
• 2013

The separation of hydrogen depends on porosity, diffusivity and solubility in permeation membrane. Dense membrane is always showing a solution diffusion mechanism but porous membrane is not showing. Therefore, porous membrane has a good hydrogen flux due to pore is carried out transferred media. This mechanism is named as the Knudsen diffusion. Hydrogen molecules or hydrogen atoms are diffused along pore that is a mean free path. In this study, complex layer hydrogen permeation membrane was fabricated by hot press process. And then, it was evaluated and calculated to relationship between hydrogen permeability and membrane porosity.

• Knowledge Management Research
• /
• v.11 no.5
• /
• pp.59-78
• /
• 2010

In this paper, we arrange the concept of 'Green' in SCM after literature study of Green SCM and investigate causal relationships between influencing factors, practice level and environmental performance focused on Korean firms empirically and conduct path analysis for hypothesis test using partial least squares regression with bootstrap. Firstly, we divide influencing factors of Green SCM into environmental and organizational factors through the previous studies of innovation diffusion theory and environmental management theory, and then we selected 'uncertainty', 'competitiveness' as the environmental factors and 'top management support', 'perceived benefit', 'training' as the organizational factors. Secondly, we classify practice level of Green SCM into 'internal environmental management', 'green purchasing', 'eco-design'. Finally, we selected 'financial performance', 'environmental performance' as the organizational performance. We conducted a survey on the middle manager of manufacturing companies implementing SCM and an empirical analysis. The results of analysis show that there exist causal relationships between influencing factors, practice level, and environmental performance of Green SCM. We expect that the result of this study will suggest useful information to managers who are responsible for SCM to design and execute Green SCM in strategic perspectives.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.949-955
• /
• 2000

Numerical study with detailed chemistry has been conducted to investigate the NOx formation and structure in $CH_4/Air-CO_2$ counterflow diffusion flames. The importance of radiation effect is identified and the role of $CO_2$ addition is addressed to thermal and chemical reaction effects, which can be precisely specified through the introduction of an imaginary species. Also NO separation technique is utilized to distinguish the contribution of thermal and prompt NO formation mechanisms. The results are as follows : The radiation effect is dominant at low strain rates and it is intensified by $CO_2$ addition. Thermal effect mainly contributes to the changes in flame structure and the amount of NO formation but the chemical reaction effect also cannot be neglected. It is noted that flame structure is changed considerably due to the addition of $CO_2$ in such a manner that the path of methane oxidation prefers to take $CH_4 {\rightarrow}CH_3{\rightarrow}C_2H_6{\rightarrow}C_2H_5$ instead of $CH_4 {\rightarrow}CH_3{\rightarrow}CH_2{\rightarrow}CH$. At low strain rate(a=10) the reduction of thermal NO is dominant with respect to reduction rate, but that of prompt NO is dominant with respect to total amount.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.10
• /
• pp.1303-1313
• /
• 1997

A micro-macroscopic analysis on the conduction-controlled directional casting of Al-Cu alloys is performed, in which emphases are placed on the microstructural features. In order to facilitate the solution procedure, an iterative micro-macroscopic coupling algorithm is developed. The predicted results show that the effect of finite back diffusion on the transient solidification process in comparison with the lever rule depends essentially on the initial concentration of an alloy. In the final casting, the eutectic fraction is distributed in an increasing-decreasing-increasing pattern, each mode of which is named the chill, interior and end zones. This nonuniformity per se suffices to justify the necessity of this work because it originates from the combined effects of finite back diffusion and cooling path-dependent nature of the eutectic formation. As the cooling rate is enhanced, not only the influence depths of boundaries narrow, but also the eutectic fractions in the chill and interior zones increase. In addition, it is revealed for the first time that the micro segregation band is formed in response to a sudden change in cooling rate during the directional casting. An increasing change creates an overshooting band in the eutectic fraction distribution, and vice versa.

• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.15-37
• /
• 2012

This study is progressed for understanding of the acceptance intention differentiated through the view of smart phone non-user's adopting plan. And the research model is proposed in the view of new technology adopting, Innovation Diffusion Theory, Rogers 1995, and Technology Acceptance Model, Davis 1989. In the survey, SPSS 18.0 and AMOS 18.0 are used to analyze the 685 smart phone non-users data. The results of the feasibility analysis and the factor analysis show the measured variables determined in the statistical significant range. Also, 11 hypotheses, among the 16 hypotheses, are adopted by the hypothesis tests through the path analysis, one-way-ANOVA and hierarchial regression analysis. The results indicate variables affect on the non-smart phone user's adopting intention. The primary factor is the perceived usefulness, secondary factor is the social property, and the rest is the playfulness. And, the primary adoption factor is affected to early majority and late majority among each innovation adopters.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.2
• /
• pp.71-85
• /
• 2021

In this study, the effect on the spatial distribution and diffusion of Arishigona, Sanaji and Bang-gae appearing in Jeolla-do was analyzed using geomorphic elements. Based on result, the AriShigona is distributed in the western plains of the Yeongsan River basin and around from the Noryeong mountain range to Mudeung mountain range, the Sanaji is mainly diffused in the middle and upper parts of the Seomjin River and the lower parts of the Mangyeong River, Dongjin River and the Boseong River basin, and the Bang-gae is found to be distributed in the Seomjin River and the upper part of the Yeongsan River basin. Although the cultural centers of these Rice-paddy Weeding Songs are different but they appear to have a similar distribution pattern in Jeolla-do. This is used as a diffusion path of cultural elements by crossing lineaments in various directions and serving bridge role at the same time. However, in the region where the lineaments do not intersect, the continuity of Rice-paddy Weeding Songs are relatively low, which are considered to be reflected in the spatial distribution and propagation of the sound due to the influence of the drain network rather than the lineament. The results of this study can provide basic data for spatial distribution of Rice-paddy Weeding Songs, and regionality and cultural division by diffusion characteristics.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1463-1466
• /
• 1987

The problem of generating minimal area CMOS functional cell layout can be converted to that of decomposing the transistor connection graph into a minimum number of subgraphs, each having a pair of Euler paths with the same sequence of input labels on the N-graph and P-graph, which are portions of the graph corresponding to NMOS and PMOS parts respectively. This paper proposes a heuristic algorithm which yields a nearly minimal number of Euler paths from the path representation formula which represents the give a logic function. Subpath merging is done through a list processing scheme where the pair of paths which results in the lowest cost is successively merged from all candidate merge pairs until no further path merging and further reduction of number of subgraphs are possible. Two examples were shown where we were able to further reduce the number of interlaces, i.e., the number of non-butting diffusion islands, from 3 to 2, and from 2 to 1, compared to the earlier work [1].