• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.16-16
• /
• 2002

The presently commercialized lithium-ion batteries use layer structured LiCoO₂ cathodes. Because of the high cost and toxicity of cobalt, an intensive search for new cathode materials has been underway in recent years. Recently, a concept of a one-to-one solid state mixture of LiNO₂ and LiMnO₂, i.e., Li[Ni/sub 0.5/Mn/sub 0.5/]O₂, was adopted by Ohzuku and Makimura to overcome the disadvantage of LiNiO₂ and LiMnO₂. Li[Ni/sub 0.5/Mn/sub 0.5/]O₂ has the -NaFeO₂ structure, which is characteristic of the layered LiCoO₂ and LiNiO₂ structures and shows excellent cycleability with no indication of spinel formation during electrochemical cycling. Layered Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂ (x = 0.5 and 0.475) materials with high homogeneity and crystallinity were synthesized using a mechanical alloying method. The Li[Ni/sub 0.475/Co/sub 0.05/Mn/sub 0.475/]O₂ electrode delivers a high discharge capacity of 187 mAh/g between 2.8 and 4.6 V at a high current density of 0.3 mA/㎠(30 mA/g) with excellent cycleability. The charge/discharge and differential capacity vs. voltage studies of the Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂ (x = 0.5 and 0.475) materials showed only one redox peak up to 50 cycles, which indicates that structural phase transitions are not occurred during electrochemical cycling. The magnitude of the diffusion coefficients of lithium ions for Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂(x = 0.5 and 0.475) are around 10/sup -9/ ㎠/s measured by the galvanostatic intermittent titration technique (GITT).

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.75-80
• /
• 1996

The purpose of this study is to clarify the mechanism of moisture transfer depend on the thickness of the spruce(Picea sitchensis Carr.). Therefore, as the basic research of moisture transmission, the amount of moisture transmission and the moisture distribution in specimens and temperature of it's surfaces in vapor transmission process were investigated. The experiment was conducted in a steady state. and the moisture distribution was measured by knife cutting and weighing the specimens. The following conclusions were obtained ; 1. It can be found that distribution of moisture in the specimen can be approximated by two different straight lines intersecting at nine or ten percent moisture content. The amount of moisture movement defends on the gradient of moisture in the wood. 2. It is investigated that the wood surface moisture contents(MCs) are less for thinner specimens than for thick ones on the absorption side. On the other hand, the wood surface MCs are greater for thinner specimens than for thick ones on the desorption side. The main factor that affects the EMC of wood would be temperature when the relative humidity of atmosphere is constant. The specimen generate heat with the absorption and desorption process. In addition, the velocities of moisture transmission varied with the thicknesses of specimens. If the temperature of wood becomes greater, its MC decreases. Then the difference between surface MC and EMC of adsorption and desorption side becomes greater for thinner specimens. Therefore it is considered that the coefficients of moisture transfer decreases with the increases of the specimens' thicknesses.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.30-34
• /
• 2010

중고온용 열전 소재로 우수한 특성을 나타내는 $CoSb_3$계 소재의 열전 소자 제조를 위해 방전플라즈마 소결법을 이용하여 소결 및 Cu-Mo 전극 소재와의 접합을 동시에 실시하였다. $CoSb_3$ 내부로의 Cu 확산을 방지하기 위해 Ti을 중간층으로 삽입하였으며 열팽창계수의 조절을 위해 Cu : Mo = 3 : 7 부피비 조성을 선택하였다. 삽입된 Ti과 $CoSb_3$는 $TiSb_2$ 이 차상을 형성하면서 접합이 진행되었지만 접합 온도 및 접합 시간의 증가에 따라 TiSb 및 TiCoSb 등의 상의 형성에 의해 접합 계면에서 균열이 발생되어 접합 특성을 악화시키는 것으로 밝혀졌다.

• 대한화학회지
• /
• 제37권3호
• /
• pp.317-326
• /
• 1993

변형된 ZSM-5 제올라이트 촉매에서 톨루엔의 n-프로필알코올에 대한 산촉매 반응이 조사되었고, 이알킬벤젠 이성질체들의 100$^{\circ}C$에서의 흡착 실험이 수행되었다. 4-프로필암모늄이온, 알루민산나트륨, 콜로이달실리카 등으로부터 수열반응에 의하여 ZSM-5가 합성되었으며, H-, K-, Sr-, P-Mg-HZSM-5, H-Y 및 H-모더나이트 등이 전통적인 방법에 의하여 만들어졌다. HZSM-5에서 톨루엔의 n-프로필알코올에 의한 주반응생성물은 크실렌, 프로필톨루엔 뿐만 아니라 에틸톨루엔을 포함하며, P-Mg-HZSM-5에서는 이알킬벤젠 이성질체중 높은 파라 선택성이 얻어졌다. 다양한 p-이성질체들의 확산계수는 1 ${times}$ 10$^{-10}$ cm$^2$/sec로 일정했으며 o-이성질체보다 m-이성질체가 10배 이상 느리게 나타났다. 이들 반응 및 흡착특성이 제올라이트의 세공구조에 의한 형상 선택성, 제올라이트의 산성도 등의 관점에서 해석되었다.

• 멤브레인
• /
• 제6권1호
• /
• pp.22-31
• /
• 1996

35$^{\circ}$C에서 polydimethytsiloxane(PDMS)막에 의한 이소프로판올수용액의 투과증발실험을 행하여 이소프로판올의 부피분율이 0.5~0.7범위에서 이상적인 투과속도로부터 가장 크게 벗어났다. 이소프로판올의 가소화 영향은 물의 투과를 증가시키는 데 비하여 물의 존재는 이소프로판올의 투과를 감소시키는 경향을 나타내었다. 혼합물에서 농도에 의존하는 확산계수를 Vignes식으로 나타내고, Flory-Huggins열역학과 Maxwell-Stefan식을 이용하여 투과속도와 선택도를 예측하였다. 이소프로판올과 물 사이의 Flory-Huggins상호작용계수는 과잉Gibbs에너지를 이용하여 계산하였으며 각 액체 성분과 고분자 사이의 상호작용계수는 평행팽윤 실험에 의하여 결정하였다. 이론적으로 예측한 투과속도는 35%이내의 오차범위에서 실험값과 일치하였으며, 투과선택도는 전 농도 범위에서 실험값과 이론값이 잘 일치하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.548-551
• /
• 2000

Spinel phase LiF $e_{y}$M $n_{2-y}$ $O_4$samples are synthesized by calcining a LiOH.$H_2O$, Mn $O_2$and F $e_2$ $O_3$mixture at 80$0^{\circ}C$ for 36h in air. Preparing LiF $e_{y}$M $n_{2-y}$ $O_4$showed spinel phase with cubic phase. The ununiform distortion of the crystallite of the spinel LiF $e_{y}$M $n_{2-y}$ $O_4$was more stable than that of the pure. The discharge capacity of the cathode for the Li/LiF $e_{0.1}$M $n_{1.9}$ $O_4$cell at the first than that of the pure. The discharge capacity of the cathode for the Li/LiF $e_{0.1}$M $n_{1.9}$ $O_4$cell at the first cycle and at the 70th cycle was about 113 and 90mAh/g, respectively. This cell capacity was retained about 82% of the first cycle after 70th cycle. Impedance profile of this cell was more stable than that pure. The resistance, the capacitance and chemical diffusion coefficients of lithium ion showed approximately 80$\Omega$, 36133.87$\mu$F ; 1.4$\times$10$^{-8}$ c $m^2$ $s^{-1}$ , respectively. , respectively.ely.

• 멤브레인
• /
• 제8권2호
• /
• pp.86-93
• /
• 1998

비다공성막을 통한 투과성분의 투과속도와 투과 조성을 on-line방식으로 측정할수 있는 장치를 개발하였다. 가교폴리비닐알콜막을 통한 물의 투과증발실험을 행하여 이 장치의 효용성을 확인하였다. 투과증발실험에서 투과가 정상상태에 도달하는데 15분미만의 시간이 걸렸으며 측정을 20분이내에 마칠 수가 있었다. 또한 측정된 투과속도 정확성과 신뢰도를 확인하기 위해서 종래의 방법대로 액체질소에 의해 투과물을 일정시간 응축시켜 투과속도를 동시에 측정하여 이를 장치의 record에 표시된 투과속도와 비교한 결과 그 오차가 $\pm$2% 이내로 일치하였다. 측정된 시간에 따른 투과속도 곡선으로 부터 3가지 종류의 확산계수 $D_{slope}, D_{1/2}, D_t$를 구하였고 이들이 문헌치와 비교한 결과 비교적 일치함을 보였다. 또한 on-line 방식으로 모든 측정이 이루어지므로 종래 방법, 즉 투과물 응축, 가열, 무게측정과정 등에서 발생할 수 있는 실험오차를 줄일수 있기 때문에 정확한 투과특성을 얻을 수가 있다. 본 연구에서 개발한 투과 장치를 사용하여 액체상태의 feed 투과를 효과적으로 분석할 수 있음을 확인하였다.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.412-424
• /
• 2019

Global fitting functions for Fe-selective chlorination in ilmenite($FeTiO_2$) and successive chlorination of beneficiated $TiO_2$ are proposed and validated based on a comparison with experimental data collected from the literature. The Fe-selective chlorination reaction is expressed by the unreacted shrinking core model, which covers the diffusion-controlling step of chlorinated Fe gas that escapes through porous materials of beneficiated $TiO_2$ formed by Fe-selective chlorination, and the chemical reaction-controlling step of the surface reaction of unreacted solid ilmenite. The fitting function is applied for both chemical controlling steps of the unreacted shrinking core model. The validation shows that our fitting function is quite effective to fit with experimental data by minimum and maximum values of determination coefficients of $R^2$ as low as 0.9698 and 0.9988, respectively, for operating parameters such as temperature, $Cl_2$ pressure, carbon ratio and particle size that change comprehensively. The global fitting functions proposed in this study are expressed simply as exponential functions of chlorination rate(X) vs. time(t), and each of them are validated by a single equation for various reaction conditions. There is therefore a certain practical merit for the optimal process design and performance analysis for field engineers of chlorination reactions of ilmenite and $TiO_2$.

• Healthcare Informatics Research
• /
• 제24권4호
• /
• pp.359-370
• /
• 2018

Objectives: We assessed the public acceptance of a health information exchange (HIE) and examined factors that influenced the acceptance and associations among constructs of the Technology Acceptance Model (TAM). Methods: We collected data from a survey of 1,000 individuals in Korea, which was administered through a structured questionnaire. We assessed the validity and reliability of the survey instrument with exploratory factor analysis and Cronbach's alpha coefficients. We computed descriptive statistics to assess the acceptance and performed regression analyses with a structural equation model to estimate the magnitude and significance of influences among constructs of TAM. Results: Eighty-seven percent of the respondents were willing to use the technology, and the average level of agreement with the need for the technology was 4.16 on a 5-point Likert scale. The perception of ease of use of the technology significantly influenced perceptions of usefulness and attitudes about the need for HIE. Perceptions of usefulness influenced attitude and behavioral intention to use HIE, and attitude influenced intention. Age showed a wide range of influences throughout the model, and experience with offline-based information exchange and health status also showed noteworthy influences. Conclusions: The public acceptance of HIE was high, and influences posited by TAM were mostly confirmed by the study results. The study findings indicated a need for an education and communication strategy tailored by population age, health status, and prior experience with offline-based exchange to gain public buy-in for a successful introduction of the technology.

• Investigative Magnetic Resonance Imaging
• /
• 제23권3호
• /
• pp.241-250
• /
• 2019

Purpose: The purpose of this study was to determine the relation between quantitative magnetic resonance imaging biomarkers, and clinical performances in chronic phase of carbon monoxide intoxication. Materials and Methods: Eighteen magnetic resonance scans and cognitive evaluations were performed, on patients with carbon monoxide intoxication in chronic phase. Apparent diffusion coefficient (ADC) ratios of affected versus unaffected centrum semiovale, and corpus callosum were obtained. Signal intensity (SI) ratios between affected centrum semiovale, and normal pons in T2-FLAIR (fluid-attenuated inversion recovery) images were obtained. The Mini-Mental State Exam, and clinical outcome scores were assessed. Correlation coefficients were calculated, between MRI and clinical markers. Patients were further classified into poor-outcome and good-outcome groups based on clinical performance, and imaging parameters were compared. T2-SI ratio of centrum semiovale was compared, with that of 18 sex-matched and age-matched controls. Results: T2-SI ratio of centrum semiovale was significantly higher in the poor-outcome group, than that in the good-outcome group and was strongly inversely correlated, with results from the Mini-Mental State Exam. ADC ratios of centrum semiovale were significantly lower in the poor outcome group than in the good outcome group, and were moderately correlated with the Mini-Mental State Exam score. Conclusion: A higher T2-SI and a lower ratio of ADC values in the centrum semiovale, may indicate presence of more severe white matter injury and clinical impairment. T2-SI ratio and ADC values in the centrum semiovale, are useful quantitative imaging biomarkers for correlation with clinical performance in individuals with carbon monoxide intoxication.