• Elastomers and Composites
• /
• 제46권3호
• /
• pp.245-250
• /
• 2011

Poly(acrylonitrile)-poly(vinyl chloride) 공중합체 섬유의 비결정성 영역에서의 자체 확산 계수와 홀 부피를 응력완화 실험으로 규명하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였다. 이론적인 응력완화식 에 응력완화 실험 결과를 적용하여 여러 가지 유동 파라메타를 계산하였다. 유동 파라메타로부터 섬유고분자 물질의 홀부피, 자체확산, 점성, 열역학파라메타 등을 계산하였다. 이들 시료의 유동 파라메타는 유동 단위의 홀 부피, 자체확 산, 유동 활성화 에너지와 직접적인 연관을 갖는 것으로 규명되었다.

• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1339-1344
• /
• 2003

Flow field-flow fractionation (FlFFF) is a technology to separate the molecules by size in an open channel. Molecules with different size have different diffusivities and are located vertically in different positions when passing through an open channel. In this study, hollow fiber membranes instead of conventional rectangular channels have been used as materials for the open channel and this change would decrease the cost of manufacturing. FlFFF is a useful technique to characterize the biopolymeric materials. Retention time, diffusion coefficients and Stokes radius of analysis can be calculated from the related simple equations. Hollow-fiber flow field-flow fractionation (HF-FlFFF) has been used for the characterization and separation of protein mixture in a phosphate buffer solution and has demonstrated the potential to be developed into a disposable FlFFF channel. The important indexes for the analytical separation are selectivity, resolution and plate height. The optimized separation condition for protein mixture of Ovalbumin, Alcohol dehydrogenase, Apoferritin and Thyroglobulin is ${\dot V}_{out}/{\dot V}_{rad}=0.65/0.85\;mL/min$.

• Nuclear Engineering and Technology
• /
• 제24권3호
• /
• pp.252-262
• /
• 1992

시간 및 공간 종속형 중성자 수송 방정식으로부터 비균질 원자로 노심해석의 효율적인 방법을 개발하였다. 이를 위해 계산 시간을 단축하고 각 집합체 크기의 소격격자(coarse mesh)에 대한 평균 중성자속을 정확히 예측할 수 있도록 노달방법(nodal method)을 도입하였고, 노드 별 평균 중성자속과 노드 각 경계면의 평균 중성자속 및 유속(flux and current)과의 관계식을 얻기 위하여 조정 인자( correction factor)로서 불연속인자(discontinuity factor)를 사용하였으며, 이 인자는 이전 시간대(previous time step)의 노드 평균 중성자속, 확산계수, 그리고 불연속인자 등에 따라 새로이 계산(updating)된다. 본 논문에서 개발된 방법을 시간에 따라 비교적 단순히 변하는 과도 노심(TWIGL)과 급격한 중성자 거동의 변화를 모사하는 과도 노심(LRA)에 적용한 결과 정확성 및 효율성이 입증되었 다.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.560-566
• /
• 2015

The self-consistent simulation based on the drift-diffusion approximation with anisotropic transport coefficients was performed. The RHCP-wave propagation was observed in MICP and this wave was refracted toward the high-density region. The calculated impedance seen from the antenna terminal shows that resistance component of MICP is a higher than that of ordinary ICP. Because of a higher resistance, the power transfer efficiency was improved to 95%. This property is practically important for large-size, low-pressure plasma sources because high resistance corresponds to high power-transfer efficiency and stable impedance matching characteristics.

• Archives of Pharmacal Research
• /
• 제26권5호
• /
• pp.421-425
• /
• 2003

The aim of the present study was to evaluate the effects of two phospholipid permeation enhancers, lysophosphatidylcholine (LPC) and didecanoylphosphatidylcholine (DDPC), along with a fusidic acid derivative, sodium taurodihydrofusidate (STDHF) and ethanol (EtOH) on the buccal transport of propranolol hydrochloride (PPL) using an ex vivo buccal diffusion model. The permeation rate of [$^3 H$]PPL as measured by steady-state fluxes increased with increasing EtOH concentration. A significant flux enhancement (P＜0.05) was achieved by EtOH at 20 and 30 %v/v concentrations. At a 0.5 %w/v permeation enhancer concentration, the buccal permeation of [$^3 H$]PPL was significantly enhanced by all the enhancers studied (i.e., LPC, DDPC and STDHF) compared to the control (phosphate-buffered saline pH 7.4, PBS). LPC and DDPC displayed a greater degree of permeation enhancement compared with STDHF and EtOH-PBS mixtures with an enhancement ratio of 3.2 and 2.9 for LPC and DDPC, respectively compared with 2.0 and 1.5 for STDHF and EtOH:PBS 30:70 %v/v mixture, respectively. There was no significant difference between LPC and DDPC for the flux values and apparent permeability coefficients of [$^3$H]PPL. These results suggest that phospholipids are suitable as permeation enhancers for the buccal delivery of drugs.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.281-284
• /
• 2004

Mean energy of electrons in $SF_6-Ar$ Mixtures Gas used by MCS-BEq algorithm has been analysed over the E/N range $30{\sim}300[Td]$ by a two term Boltzmann equation and by a Monte Carlo Simulation using a set of electron cross sections determined by other authors, experimentally the electron swarm parameters for 0.2[%] and 0.5[%] $SF_6-Ar$, 0.1[%] and 5.0[%], $SF_6-Ar$ mixtures were measured by time-of-flight(TOF) method. The transport Coefficients for electrons in (100[%])$SF_6$. (100[%])Ar, (0.2[%])$SF_6-Ar$ and (0.5[%]) $SF_6-Ar$, (5.0[%]) $SF_6-Ar$, (0.1[%])$SF_6-Ar$ mixtures were measured by time-of-flight method, and the electron energy distribution function and the parameters of the velocity and the diffusion were determined by the variation of the collision cross-sections with energy. The results obtained from Boltzmann equation method and Monte Carlo simulation have been compared with present and previously obtained data and respective set of electron collision cross sections of the molecules.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.489-490
• /
• 2006

Branched sulfonated poly(ether sulfone-ketone) copolymer was prepared with bisphenol A, 4,4-difluorobenzophenone, sulfonated chlorophenyl sulfone (40mole% of bisphenol A) and THPE (1,1,1-tris-p-hydroxyphenylethane). THPE was used 0.4 mol% of bisphenol A to synthesize branched copolymers. Organic-inorganic nano composite membranes were prepared with copolymer and a series of $SiO_2$ nanoparticles (20 nm, 4, 7 and 10 wt%). The composite membranes were cast from dimethylsulfoxide solutions. The films were converted from the salt to acid forms with dilute hydrochloric acid. The membranes were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. Branched copolymer and nano composite membranes exhibit proton conductivities from $1.12{\times}10^{-3}$ to $6.04{\times}10^{-3}\;S/cm^2$, water uptake from 52.9 to 62.4%, IEC from 0.81 to 1.21 meq/g and methanol diffusion coefficients from $1.2{\times}10^{-7}$ to $1.5{\times}10^{-7}\;cm^2/S$.

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.59-64
• /
• 2004

This study was performed to determine drying equations of sarcodon aspratus. Drying tests for sarcodon aspratus were conducted in an experimental dryer equiped with an air conditioning unit. The drying tests were performed at three air temperatures of 30$^{\circ}C$, 40$^{\circ}C$ and 50$^{\circ}C$, and two relative humidities of 30% and 50%. Measured moisture ratio data were fitted with the selected four drying models(Page, Thompson, Lewis and simplified diffusion models) using stepwise multiple regression analysis. When the coefficients of determination and root mean square errors of moisture ratio were evaluated for four drying models, the Page model was found to fit adequately to all the drying test data with coefficient of determination of 0.9996 and RMSE of 0.00523.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.245-247
• /
• 2002

The paper represents the effects of the drive-in process parameters on the residual stress profile of the p+ silicon film. For the quantitative determination of the residual stress profiles, the test samples are doped via the fixed boron diffusion process and four types of the thermal oxidation processes and consecutively etched by the improved process. The residual stress measurement structures with the different thickness are simultaneously fabricated on the same silicon wafer. Since the residual stress profile is not uniform along the direction normal to the surface, the residual stress is assumed to be a polynomial function of the depth. All of the coefficients of the polynomial are determined from the deflections of cantilevers and the displacement of a rotating beam structure. As the drive-in temperature or the drive-in time increases, the boron concentration decreases and the magnitude of the average residual tensile stress decreases. Also, near the surface of the p+ film the residual tensile stress is transformed into the residual compressive stress and its magnitude increases.

• 대한화학회지
• /
• 제37권8호
• /
• pp.744-752
• /
• 1993

거대고리화합물의 유도체들은 촉매로 사용하여 유리질 탄소전극과 탄소 미소전극에서 SOCl$_2$의 전기화학적 환원반응을 조사하였다. 이들 유도체들은 먼저 전극표면에 흡착된 후 SOCl$_2$를 환원시켰다. 전해질 용액에 전극이 담기는 시간과 촉매들의 농도의 변화는 SOCl$_2$의 환원에 크게 영향을 미쳤다. 유리질 탄소 전극에서 촉매효과에 의한 속도상수는 10배 증가하였고, Power 밀도는 최고 220% 까지 증가하였다. 탄소 미소전극을 사용하여 시간전류법에 의해 얻은 확산계수는 유리질 탄소전극을 사용하여 순환전압전류법에 의해 얻은 결과와 다소 다른 값으로 나타났다.