• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.8-15
• /
• 2003

본 연구에서는 국내산 소경재의 보다 효율적인 이용을 위하여 PEG처리한 활엽수재의 환공재 4수종(신갈나무, 굴참나무, 물푸레나무, 오동나무)과 산공재 4수종(산벚나무, 물박달나무, 층층나무, 은사시나무)에 대한 치수안정성을 평가하였다. 수축률은 공시수종 모두 PEG처리에 의해 감소하는 효과가 있었고, 산공재가 환공재보다 낮았다. 중량증가율은 PEG농도의 증가에 따라 증가되었고, 산공재가 환공재 보다 다소 높은 증가율을 보여주었다. 벌킹효과는 PEG농도의 증가에 따라 증가하였지만, 분자량이 클수록 감소하였고, 산공재가 환공재보다 벌킹효과가 높게 나타났다. 결론적으로, 산공재가 환공재보다 높은 치수안정성을 보여주었다. 따라서 PEG처리재의 치수안정효과는 목재의 구조(도관의 분포상태 및 타이로시스 존재유무)와 밀도에 크게 영향받는 것으로 생각되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제46권3호
• /
• pp.270-277
• /
• 2018

본 연구에서는 기록으로 남아있는 밀성박씨 경주 손곡문중의 박씨문헌록(朴氏文獻錄)과 지당실기(智堂實紀)의 인쇄에 사용된 목판의 수종을 식별하고자 수행되었다. 전체 282장의 목판 중 88장을 무작위로 선정하여 광학현미경으로 목재해부학적 특징을 비교분석한 결과, 7개의 목재수종이 식별되었다. 즉 가장 많이 사용된 수종은 서어나무로 39.8%를 차지하였고, 그 다음으로 돌배나무가 25.0%, 고로쇠나무가 15.9%, 산벚나무가 10.2%, 피나무가 3.4%, 감나무가 3.4%, 그리고 거제수나무가 2.3%가 사용된 것으로 조사되었다. 이 같은 결과는 일반적으로 목판인쇄에 사용된 목재수종의 범주에 속하는 것이다. 또 식별된 모든 수종들은 활엽수 산공재로 복잡한 한자를 새기기 쉽고 여러 번 인쇄를 하더라도 글자가 쉽게 닳지 않고 용이하게 구할 수 있는 목재수종이 사용된 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.1-10
• /
• 1996

The frequency distribution diagrams of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens in relation to habit and phenology were analyzed. As the habit character changes from shrub to tree, such quantitative features as vessel frequency, percentage of solitary vessels, length/diameter(L/D) ratio of vessel element decreased but tangential vessel diameter, fiber length/vessel element length(F/V) ratio increased. Qualitative features such as helical vessel wall thickening, diffuse distribution of longitudinal parenchyma, heterogeneous ray composition decreased, while alternate intervessel pits, libriform wood fiber, simple perforations increase. As the phenology character changes from evergreen to deciduous species, such quantitative features as percentage of solitary vessels, vessel element length and L/D ratio decreased but tangential vessel diameter, F/V ratio increased. Diffuse distribution of longitudinal parenchyma, heterogeneous ray composition, and crystals in qualitative features decreased, while alternate intervessel pits, libriform wood fiber, simple perforation of vessel element, ray width and ray height increased.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.82-87
• /
• 1995

Anatomical characteristics of genus Platycarya, Juglans and Pterocarya of Juglandaceae occurring in Korea were described and coded based on the IAWA list. Juglandaceae are ring-porous or semi-ring-porous. Vessels have simple perforation plates and helical thickenings in some genus. Axial parenchyma cells were abundant, most apotracheal but rarely paratracheal and rays with 1-5 seriate. Platycarya is ring-porous wood with 2-3 rows of vessels in the pore zone. Helical thickenings were found only in small vessel of latewood. Axial parenchyma were commonly diffuse-in-aggregates or vasicentric. Rays 3-5 seriate. belonging to Kribs' heterogeneous II or III type with frequent occurrence of rhomboidal crystals. Juglans are semi ring-porous with few vessels in $mm^2$ and pores are commonly solitary. Axial parenchyma were diffuse-in-aggregate or marginal. Rays were mostly homocellular and 3-5 seriates. Pterocarya is similar to Juglans in anatomical features but the reticulate parenchyma consisting of 1 layer on transverse section and biseriate rays.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.26-36
• /
• 1994

The comparative wood anatomy of 1 species belonging to genus Myrica of Myricaceae, 9 species to genus Populus and 8 species to genus Salix of Salcaceae, occurring in Korea, was described and coded according to IAWA list(Wheeler, 1989). Myrica rubra. of Myricaceae is a typical diffuse-porous wood with numerous vessels per $mm^2$ and its pores are mainly angular in outline. Vessels scalariform perforation plates with a few bars, very small inter vessel pits; axial parenchyma abundant, diffuse or diffuse-in-aggregates which is distinct and easily observed on cross section; rays 1-3 seriate, Kribs' heterogeneous I or II types, frequently contains rhomboidal crystals; Dark pigmented substances included in some rays and axial parenchyma. Salicaceae, a typical diffuse porous wood, has mainly radial pore multiple, large intervessel pits, distinct alternate pits, simple perforation plates, ray-vessel pits with circular large pits, uniseriate rays, marginal parenchyma composed of 1-2 layers. In some species, ray parenchyma contain crystals. Populus and Salix wood can be distinguished from one another by the following characters. Pores of Populus woods almost angular in outline. Uniseriate homogeneous rays slightly higher than Salix and long linear on tangential section. Whereas Salix woods appear the pores almost oval, uniseriate heterogeneous rays, which are smular narrow fusiform on tangential section and lower in height than Populus.

• Journal of the Korean Wood Science and Technology
• /
• 제6권1호
• /
• pp.15-23
• /
• 1978

This report observed for anatomical structure and identified species of small wood debris collected at Chungi-Hyankyo, Yunbuk-Chung, Jeju-Hyankyo, Teachung-Hyangkyo and Kwanduk-Chung in Jeju province constructed in a central period of Yi-dynasty, and now named as local cultral assets. 1. Sample of Chungi-Hyangkyo is gymnosperm with window-like pit, axial and radial cannal & dentate ray tracheid. This sample with identified with Pinus densiflora or Pinus thunbergii. 2. Samples of Yunbuk-Chung and Jeju-Hyangkyo are diffuse porous wood having small vessels with scalariform perforation plates scattered almost equally in annual ring, possess heterogenus ray parenchyma & banded apotracheal parenchyma. This sample is identified with Distylium racemosum. 3. Sample of Teachung-Hyangkyo is ring porous wood composed of big vessels of pore zone and compound vessels outside pore zone. It also has simple perforation plates, tylosis, homogenlls uniseriate ray parenchyma & diffuse parenchyma This sample is identified with Castanopsis cuspidata. 4. Sample of kwanduk-Chung is ring porous wood composed of big vessels of pore zone and compound vessels outside pore zone. It has simple perforation plates, heterogenus ray parenchyma, crystal, vasicentric parenchyma. This sample is identified with Zelkova serrata.

• 한국가구학회지
• /
• 제18권4호
• /
• pp.261-267
• /
• 2007

This report describes the wood anatomy and 1% safranine solution penetration depth in radial and longitudinal directions of Anthocephalus chinensis belonging to the family Rubiaceae native to Bangladesh. The wood of this species was mostly characterized by diffuse porous, vessel with simple perforation plate, vestured alternate intervessel pittings, relatively medium vessel elements and fiber, and nonseptate fiber with distinctly bordered pits at radial wall. The body ray cell was procumbent with 2 to over 4 rows of upright and square marginal cells. Sometimes, the rays with procumbent, square and upright cells were mixed. Latewood fiber was thin to thick walled while it was very thin walled in earlywood. Axial parenchyma was diffuse, vasicentric, 5-8 cells per parenchyma strand dominantly present. Liquid penetration depth was observed in radial and longitudinal directions at moisture level of 7.42%. Longitudinal penetration was found 6.3 times higher than radial penetration. The initial penetration rate of safranine solution was high, but gradually decreased during the course of time. Different anatomical features were found to be responsible for the variation of safranine solution penetration depth compared to Gmelina arborea.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.111-119
• /
• 2007

An experiment was conducted to know the safranine impregnation distance from surface to inward using 6 different hardwood species. During impregnation, 3 parameters were applied-vacuum, pressure and soaking time. Only vacuum treatment did not increase the permeability of wood. Vacuum followed by pressure increased the penetration depth of safranine in radial, tangential and longitudinal direction. Longitudinal penetration was found easy to impregnate. Comparing with radial and tangential direction, radial penetration was found easy. There was a striking difference among sapwood and heartwood permeability. Safranine input depth was found highest in diffused porous wood rather than in ring porous wood. At increased vacuum and pressure, safranine penetration was found easy.

• Journal of the Korean Wood Science and Technology
• /
• 제16권1호
• /
• pp.9-20
• /
• 1988

Lespedeza species have been widely used not only as plant resources for bark, leaves and honey, but also as erosion control materials. This study was carried out to investigate the structural and wood tiber characteristics in order to obtain basic information for the utilization of the wood. The wood structure was investigated for 10 selected species and the wood fiber, for the 5 selected species among Lespedeza species distributed all over the country. The following results were obtained. In the cross section, campylotropis showed ray diffuse porous wood, L. bicolor, L. cyrtobotrya, L. thunbergii var. intermedia, diffuse porous wood, and L. tomentella, L. angustifolioides. L. maritima, L. robusta, L. patentibicolor, ring porous wood. The maximum diameter of a single vessel ranged 66-123 ${\mu}$ in all species. Campylotropis showed the most number of vessels, L. angustifolioides, the least. The number of ray per mm ranged 7-22, Campylotropis showed the most number of rays, L. angustifolioides, the least. In the radial section the average length of vessel ranged 121-250 ${\mu}$ in all species. L. thunbergii var. intermedia showed the longest vessel, L. tomentella, the shortest. In tangential section the average width of the uniseriate ray ranged 9.2-14.7${\mu}$, that of the multiseriate ray, 19.2-42.1 ${\mu}$. The average height of the uniseriate ray ranged 143.0-1162.0 ${\mu}$. The width of fiber ranged 10.12-13.61 ${\mu}$, L. maximowiezii showed the narrowest tiber, L. thunbergii var. intermedia. the widest, the thickness of fiber wall ranged 2.93-3.71 ${\mu}$ in the five species. L. maximowiezii showed the most thin fiber wall, L. thunbergii var. intermedia, the thickest, L. cyrtobotrya showed the difference in the size of fiber between the shade and the sunny sites but L. maximowiezii showed no difference. There was significant difference in fiber length, fiber width and wall thickness between L. eyrtobotrya and L. maximowiezii.