• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.46-51
• /
• 2002

Fatigue life estimation by the theoretical stress concentration factors are, in general, considerably different from test results. And in calculating stress concentration factor, it is very difficult to consider actual geometry and material property which are the notch shapes, imperfections or defects of materials such as porosities inclusions and casting defects, etc. Therefore, the paper deals with the experimental method to find out the more exact stress concentration factors by measuring the strain distributions on each specimen by 3D-ESPI(Electronic Speckle Pattern Interferometry) System. Then the fatigue lives are compared between theoretical calculations using stress concentration factors determined by 3D-ESPI system and fatigue test results.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.109-117
• /
• 1997

A new relaxation algorithm based on distribution of matched errors and possibility is proposed to solve efficiently correspondence problem. This algorithm can be applied to various method, such as BMA, feature-, and region-based matching methods, by modifying its smoothness function. It consists of two stages which are transformation and iteration process. In transformation stage, the errors obtained by any matching algorithm are transformed to possibility values according to these statistical distribution. Each grade of possility is updated by some constraints which are defined as smoothness, uniqueness, and discontinuity factor in iteration stage. The discontinuity factor is used to reserve discontinuity of disparity. In conventional methods, it is difficult to find proper weights and stop condition, because only two factors, smoothness and uniqueness, have been used. However, in the proposed mthod, the more smoothing is not ocurred because of discontinuity factor. And it is efective to the various image, even if the image has a severe noise and repeating patterns. In addition, it is shown that the convergence rate and the quality of output are improved.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.365-367
• /
• 2001

We are explaining shapes factor of ground electrode in a rectangular parallelepiped which is based on analysis of a hemisphere electrode. Actually, a hemisphere electrode is hardly used in a plan and construction, because it is difficult for somebody to use one. This thesis describes the method of grounding resistance estimation which is used the water tank model and electrode shopes factor.

• Elastomers and Composites
• /
• v.26 no.4
• /
• pp.287-295
• /
• 1991

The mixing process with carbon black is important in the rubber industries. However, it is difficult to characterize the mixing mechanism of the carbon black. The mixing mechanism(distributive mixing and dispersive mixing) was discribed in this paper. The effect of fill factor on the mixing of the carbon black was studied. The dispersive mixing ability increases with increasing fill factor. However, the distributive mixing ability decreases with increasing fill factor. The effect of the carbon black content on the rheological property of the material was studied in this paper. The viscosity of the material increases with increasing the carbon black content. However, the elasticity of the matarial decreases with the carbon black content.

• International Journal of Contents
• /
• v.1 no.2
• /
• pp.26-30
• /
• 2005

According to the fast growth of information on the Internet, it is becoming increasingly difficult to find and organize useful information. To reduce information overload, it needs to exploit automatic text classification for handling enormous documents. Support Vector Machine (SVM) is a model that is calculated as a weighted sum of kernel function outputs. This paper describes a document classifier for web documents in the fields of Information Technology and uses SVM to learn a model, which is constructed from the training sets and its representative terms. The basic idea is to exploit the representative terms meaning distribution in coherent thematic texts of each category by simple statistics methods. Vector-space model is applied to represent documents in the categories by using feature selection scheme based on TFiDF. We apply a category factor which represents effects in category of any term to the feature selection. Experiments show the results of categorization and the correlation of vector length.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.3
• /
• pp.125-134
• /
• 2019

Successful local anesthesia in dental treatment is the most important prerequisite for pain control of patients. However, unlike that in the maxilla, it is difficult to administer local anesthesia in the mandible, and the success rate of conventional inferior alveolar nerve block (IANB) is only 80-85%. It is attributed to various causes such as anatomical variations, extreme anxiety, and technical errors; thus, various alternatives have been devised to improve this. We will analyze the causes of failure in conventional IANB and examine various alternatives that can be applied in these cases.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.103-110
• /
• 2022

In the era of the 4th Industrial Revolution, smart technology being considered to improve productivity breakthroughs is in the spotlight as a means to replace traditional construction technology in the construction industry. However, various problems are occurring in construction sites using smart technology and causing negative impacts on construction projects. Therefore, the objective of this study is to identify risk factors that occur when smart technologies are used in construction projects. To achieve this purpose, this study investigated the difficulties at construction projects using smart technology, and risk factors were derived based on site surveys and literature. The risk factors were measured by experts, and then a total of 19 risk factors was derived by exploratory factor analysis. As a result, risks were classified as 5 factors, the institutional factor is the most difficult response, and the government needs anticipative system improvement and a long-term plan. The research findings provide practical implications for construction experts trying to apply smart technology in construction sites and construction policy-makers to revitalize smart technology.

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.145-155
• /
• 2011

It is very important for successful construction to estimate the soil volume conversion factor of domestic weathered ground accurately and reasonably. However, it is very difficult to quantify the weathering degree of weathered ground at the field, so that the soil volume conversion factor used in Korea is often dependent upon the standard of foreign countries. Besides, the soil volume conversion factor of domestic weathered ground has been rarely studied and the use and accuracy of the soil volume conversion factor have been questioned persistingly. This study suggests a simple but robust method for estimating the soil volume conversion factor and measuring the weathering degree reasonably, and attempts to establish the utilization of a soil volume conversion factor measurement system based on experimental and analytical results. We made relationship between electrical resistivity and weathering degree presented from weathering index obtained through laboratory tests using field samples, and an estimation method of in-situ weathering degree for granites and a calculation method of soil volume conversion factor using electrical resistivity. And also, we suggested the photogrametry measurement-equipment system for measuring the volume of cargo box and the application plan of stand equipment and RFID for calculating the earth volume and distinguishing buggies in order to design the measurement system for soil volume conversion factor applicable to the field. Ultimately, the Weathered Earth-work Management Program (WEMP) was developed, so field managers may easily obtain the information about earth volume and soil volume conversion factor at the weathered ground.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.2
• /
• pp.106-109
• /
• 2000

Vascular endothelial cells (EGs) are usually difficult to culture to culture in a large scale because of their complicated requirements for cell growth. As the vascular endothelial growth factor (VEGF) is a key growth factor in the EC culture, we transfected human umbilical vein endothelial cells (HUVEC) using a plasmid containing VEGF gene and let them grow in a culture medium eliminated an important supplement, endothelail cell growth supplement(ECGS). The expression of VEGF by HUVEC tansfected with Vegf GENE was not enough to stimulate the growth of HUVEC, only 40% of maximum cell density obtainable in the presence of ECGS. However, when the culture medium was supplied with 2.5 ng/ml of basic fibroblast growth factor (bFGF), a synergistic effect effect of VEGE and bFGF was observed. In this case, the final cell density was recovered was recovered up to about 78% of maxium value.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.4
• /
• pp.151-156
• /
• 2011

The domestic mine development community the countermeasure establishment is insufficient about ground sinkage, not only the mine which is a in line is partial from the mine of the most which has become the rest mine and abandoned mine or the index sinkage occurs. The ground sinkage which occurs from the abandoned mine area most after operation is stopped, a long time passes and accurately predicts an occurrence location and a time with the residual sinkage which occurs, is difficult. Underground goaf of the abandoned mine and the closed shaft When considering the potentiality which causes the instability of ground, is a possibility of reaching a damage in the ground infrastructure or life. The underground shaft which is formed specially with mine development and goaf operates with the obstacle factor in the development project of the mine area, the ground sinkage which is caused by with sinkage, operates with the large safety accident occurrence factor where the important infrastructure of the railroad, road, residential area etc. is damaged. Therefore, In this paper, the goaf cave of the abandoned mine area, for the displacement behavior according to the filling factor of the material is to analyze the numerical analysis.