• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.421-424
• /
• 2011

Thermal Analyses are conducted to measure various factors of a liquid fuel required for numerical analysis. Thermal Analyses are divided into two different methods of TGA (Thermo Gravimetric Analysis) and DSC (Differential Scanning Calorimetry). Non-isothermal experimental results are analyzed using by TGA. The results are filtered by a Freeman Carroll method. At the same time, chemical parameters of unknown liquid fuel, activation temperature and reaction order are measured to 6128.2 K and 1.4, respectively. Furthermore, the parameters can be obtained by various mathematical methods. It is found that tha parameters depend on the processing method.

• Archives of Pharmacal Research
• /
• v.11 no.3
• /
• pp.181-184
• /
• 1988

The effect of clover saponin on the phase transition of liposomal lipid bilayers of dimyristoyl phosphatidylcholine was investigated with differential scanning calorimetry. The thermograms of the liposomal bilayers incorporated with the clover saponin were obtained, and the enthalpy changes and the sizes of cooperative unit of the transition were calculated. The results showed that incorporation of the clover saponin into the liposomal bilayers effectively reduced the transition temperature at which the transition from solid state to liquid-crystalline state occurs, and broadened the thermogram peaks. It also reduced the size of cooperative unit of the transition. These results indicate that the clover saponin might have significant effect on the fluidity of biological membranes.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.1-7
• /
• 2004

This study investigated the effects of aging on the transformation behavior of $Ti-50.1at\%$ Ni alloy by means of differential scanning calorimetry. It was found that aging in the temperature range of $350^{\circ}C\~550^{\circ}C$ induced complex transformation behavior, involving the R-phase and multiple-stage martensitic transformation. Usually aged Ni-rich NiTi alloys undergo martensitic transformation on cooling from high temperatures in two step : B2 to R and then R to Bl9'(normal behavior). But under certain ageing conditions, the transformation can also occur in three or more step(unusual multiple step behavior). In the present study we use differential seaming calorimetry(DSC) for a systematic investigation of the evolution of transformation behavior with ageing temperature and time.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.32-40
• /
• 2019

During the manufacturing process of a printed circuit board(PCB), fumes and mists are generated as the ink dries on the PCB surface. The generated fumes and mists are deposited in the dryer wall and the exhaust duct. Deposited fumes and mists may present a fire hazard if the dryer temperature control system fails. In this study, the thermal stability of the fumes and mists deposited in the dryer and ducts has been analyzed by experimental methods such as thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), auto ignition temperature (AIT), and multiple mode calorimetry(MMC). According to the experimental analyses, experimental samples are likely to generate gas at the temperature ($180{\sim}240^{\circ}C$) that deviates from the normal operating temperature ($150{\sim}156^{\circ}C$). It has been shown that the thermal stability is degraded when the temperature is deviated from the normal operating temperature. In the end, engineering and management safety measures of accidental prevention have been suggested.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.55-60
• /
• 2018

The thermal property is one of the most important characteristics in the field of energetic materials. Because energy materials release decomposition heat, differential scanning calorimetry (DSC) is frequently used for thermal analysis. However, thermodynamic events, such as melting can interfere with DSC kinetic analysis. In this study, we use isothermal mode for DSC measurement to avoid thermodynamic issues. We also merge accelerating rate calorimetry(ARC) data with DSC data to obtain a robust prediction results for small scale samples and for large scale samples as well. For the thermal property prediction, advanced kinetics and technology solutions(AKTS) programs are used.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.547-553
• /
• 2017

Thermal analysis of three energetic materials used in pyroelectric device was performed using Differential Scanning Calorimetry (DSC). The theoretical method for extracting the reaction rate equation of energetic materials using DSC experimental data is proposed and the reaction rate extraction is performed. The results of the DSC were analyzed by the conversion method such as Friedman. Activation energy and frequency factor according to mass fraction were extracted to complete the reaction rate equation. The extracted reaction rate equation has a form that represents the entire chemical reaction process, not the assumption that the chemical reaction process of the high energy material is a main step in several stages. It has considerable advantages in terms of theoretical and accuracy as compared with the chemical reaction rate form extracted through conventional thermal analysis experiments. Using the derived reaction rate equation, we predicted the performance change of three energetic materials operating on actual storage condition over 20 years.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.1015-1019
• /
• 1996

Several alkyl chlorides were brominated using LiBr and $CaBr_2$ adsorbed on alumina in the absence of solvent. The yields of alkyl bromides were fairly high. Such a high reactivity by these bromide salts might be due to the interaction of minute amount of water and the salt on alumina. Differential scanning calorimetry (DSC) thermogram was provided and discussed.

• Tribology and Lubricants
• /
• v.12 no.1
• /
• pp.36-41
• /
• 1996

The suitability of a pressure differential scanning calorimetry (PDSC) in monitoring the quality of synthetic base fluids has been investigated using polyalphaolefin (PAO) oils as an example. Induction period meassured at 170, 180 and 19$0^{\circ}C$, and 3.53 MPa oxygen pressure was applied to characterize their oxidation stability. The PDSC method has proven to be simple and repeatable and requires only small sample size for testing. More importantly, it can be applied in differentiating the oxidation performance quality of PAO oils and is versatile enough for use in studying kinetic aspects of PAO oil oxidation which include the effect of temperature and antioxidant concentration. Additionally, the method appears to correlate well with a rotary bomb oxidation test (RBOT).

• Journal of Pharmaceutical Investigation
• /
• v.29 no.2
• /
• pp.117-126
• /
• 1999

Differential scanning calorimetry(DSC) was used as a screening technique for assessing the compatibility of some drugs with excipients. On the basis of DSC results, interaction of ibuprofen with PVP K40 was found and eutectic formations with PEG 6000 or magnesium stearate were demonstrated. Fenoprofen Ca was found to interact with PEG 6000. Naproxen showed interactions with PEG 6000, PVP K40, PVPP and Mg stearate. Interactions of tiaprofenic acid with PVP K40 or PVPP were found and eutectic formations with PEG 6000 or Mg stearate were observed. Bisoprolol hemifumarate, metoprolol tartrate and penbutolol sulfate were found to interact with lactose.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.1
• /
• pp.35-42
• /
• 1990

A new form of sulfabenzamide was characterized using X-ray diffraction patterns and differential scanning calorimetry. Solubility studies demonstrated that, of the sulfabenzamide polymorphs, the new form was more soluble than form I. Compression of the new form at compression force of 1000 $kg/cm{^2}$ didn't induce polymorphic change in the crystal. Similar patterns were also produced through grinding. The effects of some diluents on the polymorphic transformation from the new form into form I by grinding and compression were also studied. Three diluents, $Avicel^{\circledR}$, lactose and starch showed no influence on the polymorphic transformation. The new form seemed to be more suitable for the pharmaceutical preparation.