• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1193-1203
• /
• 2000

본 연구는 흡착에 의한 Cd(II)의 제거를 위하여 일본 Diaion사에서 제조되고 있는 강산성양이온 교환수지(SK1B)를 흡착제로 사용하여 흡착평형실험, 탈착실험 및 흡착속도실험을 수행하였다. 흡착평형실험에서는 흡착능에 미치는 pH와 온도의 영향을 알아보았고 흡착등온식을 산출하였으며, 탈착실험에서는 재생회수에 대한 수지의 재생율의 변화에 대해서 알아보았다. 흡착속도실험에서는 수지를 미분층 반응기에 채워 유량별로 초기제거속도를 구하여 경막저항이 최소가 되는 최적유량을 구하였으며, 이 최적유량에서 흡착속도실험을 수행하여 총괄흡착속도식을 구하였다. 용액의 pH를 변화(2~7)시켜 제조하여 수지를 투여한 결과 pH가 증가할수록 흡착능이 증가하였으며 pH 6 이상에서는 흡착능이 일정한 경향을 나타내었다. 흡착능에 미치는 온도의 영향은 $10{\sim}50^{\circ}C$ 범위에서 온도가 증가할수록 흡착능도 증가함을 알 수 있었다. 회분식실험을 통해 얻은 자료를 각 흡착등온식에 적용해 본 결과 본 실험의 농도 영역(5~15ppm)에서는 Freundlich 흡착등온식과 Sips 흡착등온식이 Langmuir 흡착등온식보다 더 %편차가 적었다. 탈착제로서 0.01~2N 농도의 HCl 수용액을 사용할 경우에는 탈착제의 농도가 진할수록 흡착제의 재생율이 높았으며 재생 반복회수가 늘어날수록 재생율이 약간씩 감소하였다. 미분층 반응기를 이용한 연속공정실험($25{\pm}5^{\circ}C$)에서 경막확산저항이 최소가 되는 최적유량 $564m{\ell}/min$에서 수행한 수지에 대한 Cd(II) 수용액의 총괄흡착속도식은 다음과 같이 표현될 수 있다. $r=1.3785C_{fc}^{1.2421}-2.0907{\times}10^{0.0746C_i}\;q_e^{0.0121C_i-0.0301}$

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.161-166
• /
• 2003

It is the common features of the integral reactors that the main components of the RCS are installed within the reactor vessel, and so there are no any flow pipes connecting the coolant pumps or steam generators. Due to no any flow pipes, it is impossible to measure the differential pressure at the RCS of the integral reactors, and it also makes impossible measure the flow-rate of the reactor coolant. As a alternative method, the method by the measurement of coolant pump power has been introduced in this study. Up to now, we did not found out a precedent which the coolant pump power is used for the real-time flow-rate calculation at normal operation of the commercial nuclear power plants. The objective of the study is to embody the real-time flow-rate calculation method by the measurement of coolant pump power in an integral reactor. As a result of the study, we could theoretically reason that the capacity-head curve and capacity-shaft power curve around the rated capacity with the high specific-speeded axial flow pumps have each diagonally steep incline but show the similar shape. Also, we could confirm the above theoretical reasoning from the measured result of the pump motor inputs, So, it has been concluded that it is possible to calculate the real-time flow-rate by the measurement of pump motor inputs. In addition, the compensation for a above new method can be made by HBM being now used in the commercial nuclear power plants.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1540-1555
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect its stress conditions, mechanical behavior and thermal-hydraulic performance. A reliable numerical method is of great importance to reveal the complex evolution of mechanical deformation, flow redistribution and temperature field for the plate-type fuel assembly under non-uniform irradiation. This paper is the first part of a two-part study developing the numerical methodology for the thermal-fluid-structure coupling behaviors of plate-type fuel assembly under irradiation. In this paper, the thermal-fluid-structure coupling methodology has been developed for plate-type fuel assembly under non-uniform irradiation condition by exchanging thermal-hydraulic and mechanical deformation parameters between Finite Element Model (FEM) software and Computational Fluid Dynamic (CFD) software with Mesh-based parallel Code Coupling Interface (MpCCI), which has been validated with experimental results. Based on the established methodology, the effects of non-uniform irradiation and fluid were discussed, which demonstrated that the maximum mechanical deformation with irradiation was dozens of times larger than that without irradiation and the hydraulic load on fuel plates due to differential pressure played a dominant role in the mechanical deformation.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.925-930
• /
• 2013

The fault current of the power transmission system is greater than that of the power distribution system. Therefore, the introduction of superconducting fault current limiter (SFCL) is more needed to reduce the increased fault current. The trigger-type SFCL consists of the high-temperature superconducting element (HTSC), the current limiting reactor (CLR) and the circuit breaker (CB). The trigger-type SFCL can be used to supplement the disadvantages of the resistive-type SFCL. The operation characteristics of the current ratio differential relay which is usually applied to the protection device of the power transmission system are expected to be affected under fault conditions and the applicability of the trigger-type SFCL. In this paper, we analyzed the operating characteristics, by the fault conditions, between the current ratio differential relay for line protection and the trigger-type SFCL in the power transmission system through the PSCAD/EMTDC simulation.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.67-72
• /
• 1996

Wavelets are localized in space and in frequency. This localization properties result from the multiresolution analysis of wavelets. The wavelet transform can be used to detect singularity of dynamic systems after the signal is de-noised. We applied the wavelet transform decomposition and do-noising procedures to the Hanaro dynamics consisting of 39 nonlinear differential equation plus Gaussian noise. The numerical tests demonstrate that the wavelet transform de-noising is effective for detection of the abrupt reactivity change and computationally efficient. Thus this wavelet theory could be profitably utilized in a real-time system for automatic event recognition (e.g., reactor condition monitoring).

• 한국안전학회지
• /
• 제13권2호
• /
• pp.96-103
• /
• 1998

The treatment of the wastewater of Carmine-6B Process was studied using an electrochemical batch reactor with Pt-electrodes. The concentration of azo dye was exponentially decreased unto 6-37% residuum during 50 hr operations. The fractional conversion was not influenced by the initial pH value, but it was increased with increasing the rotating speed and/or temperature of the electrolyte. It was observed by the differential method of rate analysis that the rate of the oxidation reaction at anode was exponentially increased with increasing the cell voltage. The pH of the wastewater was changed from acid or alkali to neutral. The COD of the solution was increased at the beginning of the treatment, but it was decreased soon.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1984년도 하계학술회의논문집
• /
• pp.92-95
• /
• 1984

This paper describes a general method for the design of variable structure Model-Following Control systems (VSMFC). This design concept is developed using the theory of variable structure systems and slide mode. The feasibility and the advantages of the method are illustrated by applying it to a 1000 MWe Boiling Water Reactor. The control is studied in the range of 85 - 90 % of rated power for load-following control. A set of 12 nonlinear differential eq. are used to simulate the total plant. A 6th order linear model has been developed from these equations at 85% of rated power. The obtained controller is shown by simulations to be able to compensate for a plant parameter variation over a wide power range.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.239-246
• /
• 2013

The purpose of this study is to determine the feasibility of dry-type desulfurization process for actual application to coal-fired power plant. We used actual exhaust gas from Facility Y, Plant #2 to fabricate a demo-scale testing device to attempt to improve the efficiency of desulfurization. A spout-bed circulating dry scrubber convergence system connecting turbo reactor with bag filter was devised, then analyzed for performance characteristics of $SO_2$ removal for Ca/S mole ratio, superficial gas velocity, and ammonia injection, and for secondary reaction characteristics of the non-reactive sorbent at the bag filter. As a result, the installation of spout-bed circulating dry scrubber convergence system showed better economy and efficiency for removing sulfur than the existing wet/semidry-type desulfurization process. In addition, the best efficiency for desulfurization occurred when connected to the bag filter, with differential pressure maintained at 150 $mmH_2O$.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.113-121
• /
• 2014

In this work, an integrated model including molecular dynamics and chemical rate theory was implemented to calculate the growth of point defect clusters(PDC) and copper-rich precipitates(CRP) which could change the mechanical properties of reactor pressure vessel(RPV) steels in a nuclear power plant. A number of time-dependent differential equations were established and numerically integrated to estimate the evolution of irradiation defects. The calculation showed that the concentration of the vacancies was higher than that of the self-interstitial atoms. The higher concentration of vacancies induced a formation of the CRPs in the later stage. The size of the CRPs was used to estimate the mechanical property changes in RPV steels, as is the same case with the PDCs. The calculation results were compared with the measured values of yield strength change and Charpy V-notch transition temperature shift, which were obtained from the surveillance test data of Korean light water reactors(LWRs). The estimated values were in fair agreement with the experimental results in spite of the uncertainty of the modeling parameters.

• 한국태양에너지학회 논문집
• /
• 제22권1호
• /
• pp.9-21
• /
• 2002

To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the heat transfer rate in cylindrical bed reactor packed with calcined Dolomite. Two dimensional (radial and circumferential) Partial differential equations, concerning heat and mass transfer in packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction of calcined Dolomite and heat transfer. The results obtained by numerical analysis about two dimensional profiles of temperature and conversion of reactant in the packed bed reactor and the amount of exothermic heat released from the reactor are follows. It was found that all of calcined Dolomite packed bed kept the reaction temperature of about 750K throughout the entire part of the bed, immediately after the steam was introduced exothermic reaction of hydration was proceeded from the packed bed inpu to output and from wall side to center. The rate of thermochemical reaction depends on the temperature and concentration and it is also governed by the boundary conditions and heat transfer rate in the particle packed bed.