• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.933-944
• /
• 2019

This study analyzes the tide deformation of land boundary regions on the east (Region A) and west (Region B) sides of the Ross Ice Shelf in Antarctica using Double-Differential Interferometric Synthetic Aperture Radar (DDInSAR). A total of seven Sentinel-1A SAR images acquired in 2015-2016 were used to estimate the accuracy of tide prediction model and Young's modulus of ice shelf. First, we compared the Ross Sea Height-based Tidal Inverse (Ross_Inv) model, which is a representative tide prediction model for the Antarctic Ross Sea, with the tide deformation of the ice shelf extracted from the DDInSAR image. The accuracy was analyzed as 3.86 cm in the east region of Ross Ice Shelf and it was confirmed that the inverse barometric pressure effect must be corrected in the tide model. However, in the east, it is confirmed that the tide model may be inaccurate because a large error occurs even after correction of the atmospheric effect. In addition, the Young's modulus of the ice was calculated on the basis of the one-dimensional elastic beam model showing the correlation between the width of the hinge zone where the tide strain occurs and the ice thickness. For this purpose, the grounding line is defined as the line where the displacement caused by the tide appears in the DDInSAR image, and the hinge line is defined as the line to have the local maximum/minimum deformation, and the hinge zone as the area between the two lines. According to the one-dimensional elastic beam model assuming a semi-infinite plane, the width of the hinge region is directly proportional to the 0.75 power of the ice thickness. The width of the hinge zone was measured in the area where the ground line and the hinge line were close to the straight line shown in DDInSAR. The linear regression analysis with the 0.75 power of BEDMAP2 ice thickness estimated the Young's modulus of 1.77±0.73 GPa in the east and west of the Ross Ice Shelf. In this way, more accurate Young's modulus can be estimated by accumulating Sentinel-1 images in the future.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.93-101
• /
• 2008

Side channel attacks are well known as one of the most powerful physical attacks against low-power cryptographic devices and do not take into account of the target's theoretical security. As an important succeeding factor in side channel attacks (specifically in DPAs), exact time-axis alignment methods are used to overcome misalignments caused by trigger jittering, noise and even some countermeasures intentionally applied to defend against side channel attacks such as random clock generation. However, the currently existing alignment methods consider only on the position of signals on time-axis, which is ineffective for certain countermeasures based on time-axis misalignments. This paper proposes a new signal alignment method based on interpolation and decimation techniques. Our proposal can align the size as well as the signals' position on time-axis. The validity of our proposed method is then evaluated experimentally with a smart card chip, and the results demonstrated that the proposed method is more efficient than the existing alignment methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.122-128
• /
• 2016

This paper, proposes a new analysis method for the event detection of an OTDR signal. An OTDR signal was passed through the Hamming filter to remove the high frequency noise included in the signal. The signal was then passed consecutively through a differential filter to detect the events of interest. The terminal position was determined using the fact that there is a large gap between the signal and the trailing noise power beyond the terminal. This study examined the local maxima of the signal up to the terminal position and determined the peak regions. The real events were determined from the peak regions using noise information and peak threshold. Finally, the user events were found by inspecting the user peaks beyond the terminal position. The events of the OTDR signal without users are located at less than 17m compared to the optical fiber link setup. The events of the JDSU device are located less than 25m and their users are less than 5m. For the RadianTech device, the events are detected at less than 19m and the users are found in 5m. The results suggest that the proposed method is sufficiently applicable to an optical fiber link monitoring system.

• Journal of Life Science
• /
• v.21 no.3
• /
• pp.385-392
• /
• 2011

The otter (Lutra lutra) in Korea is classified as a first grade endangered species and is managed under state control. We performed a phylogenetic analysis of the otter that inhabits the Changnyeong, Jinju, and Geoje areas in Gyeongsangnamdo, Korea using mtDNA and microsatellite (MS) markers. As a result of the analysis using the 676-bp D-loop sequence of mtDNA, six haplotypes were estimated from five single nucleotide polymorphisms. The genetic distance between the Jinju and Geoje areas was greater than distances within the areas, and the distance between Jinju and Geoje was especially clear. From the phylogenetic tree estimated using the Bayesian Markov chain Monte Carlo analysis by the MrBays program, two subgroups, one containing samples from Jinju and the other containing samples from the Changnyeong and Geoje areas were clearly identified. The result of a parsimonious median-joining network analysis also showed two clear subgroups, supporting the result of the phylogenetic analysis. On the other hand, in the consensus tree estimated using the genetic distances estimated from the genotypes of 13 MS markers, there were clear two subgroups, one containing samples from the Jinju, Geoje and Changnyeong areas and the other containing samples from only the Jinju area. The samples were not identically classified into each subgroup defined by mtDNA and MS markers. It could be inferred that the differential classification of samples by the two different marker systems was because of the different characteristics of the marker systems used, that is, the mtDNA was for detecting maternal lineage and the MS markers were for estimating autosomal genetic distances. Nonetheless, the results from the two marker systems showed that there has been a progressive genetic fixation according to the habitats of the otters. Further analyses using not only newly developed MS markers that will possess more analytical power but also the whole mtDNA are needed. Expansion of the phylogenetic analysis using otter samples collected from the major habitats in Korea should be helpful in scientifically and efficiently maintaining and preserving them.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.749-753
• /
• 2012

In present work, anode support for micro-tubular SOFC was fabricated with outer diameter of 3 mm and characterized with microstructure, mechanical properties and gas permeability. The microstructure of surface and cross section of a porous anode support were analyzed by using SEM (Scanning Electron Microscope) image. The gas permeability and the mechanical strength of anode support was measured and analysed by using differential pressure at the flow rates of 50, 100, 150 cc/min. and using universal testing machine respectively. The unit cell composed of NiO-YSZ, YSZ, YSZ-LSM/LSM/LSCF was fabricated and operated with reaction temperature and fuel flow rate and showed maximum power density of $1095mW/cm^2$ on the condition of $800^{\circ}C$. The performance of single cell for micro-tubular SOFC increased with the increasing the reaction temperature due to the decrement of ohmic resistance of cell by the increment of the ionic conductivity of electrolyte through the evaluation of electrochemical impedance analysis for single cell with reaction temperature.

• Management & Information Systems Review
• /
• v.12
• /
• pp.137-160
• /
• 2003

The association between accounting earnings and the stock price of an entity is the subject that has been most heavily researched during the past 25 years in accounting literature. Researcher's common finding is that there are positive relationships between accounting earnings and stock prices. However, the explanatory power of accounting earnings which was measured by $R^2$ of regression functions used was rather low. To be connected with these low results, The prior studies propose that there will be additional information, errors in variables. This study investigates empirically determinants of earnings response coefficients(ERCs), which measure the correlation between earnings and stock prices, using earnings level / change, as the dependent variable in the return/earnings regression. Specifically, the thesis tests whether the factors such as earnings persistence, growth, systematic risk, image, information asymmetry and firm size. specially, the determinable variables of ERC are explained in detail. The image / information asymmetry variables are selected to be connected with additional information stand point, The debt / growth variables are selected to be connected with errors in variables. In this study, The sample of firms, listed in Korean Stock Exchange was drawn from the KIS-DATA and was required to meet the following criteria: (1) Annual accounting earnings were available over the 1986-1999 period on the KIS-FAS to allow computation of variables parameter; (2) sufficient return data for estimation of market model parameters were available on the KIS-SMAT month returns: (3) each firm had a fiscal year ending in December throughout the study period. Implementation of these criteria yielded a sample of 1,141 firm-year observation over the 10-year(1990-1999) period. A conventional regression specification would use stock returns(abnormal returns) as a dependent variable and accounting earnings(unexpected earnings) changes interacted with other factors as independent variables. In this study, I examined the relation between other factors and the RRC by using reverse regression. For an empirical test, eight hypotheses(including six lower-hypotheses) were tested. The results of the performed empirical analysis can be summarized as follows; The first, The relationship between persistence of earnings and ERC have significance of each by itself, this result accord with one of the prior studies. The second, The relationship between growth and ERC have not significance. The third, The relationship between image and ERC have significance of each by itself, but a forecast code doesn't present. This fact shows that image cost does not effect on market management share, is used to prevent market occupancy decrease. The fourth, The relationship between information asymmetry variable and ERC have significance of each by. The fifth, The relationship between systematic risk$(\beta)$ and ERC have not significance. The sixth, The relationship between debt ratio and ERC have significance of each by itself, but a forecast code doesn't present. This fact is judged that it is due to the effect of financial leverage effect and a tendency of interest.

• Journal of Distribution Science
• /
• v.14 no.1
• /
• pp.93-102
• /
• 2016

Purpose - The purpose of paper is studying the static and dynamic side for long-term memory storage properties, and increase the explanatory power regarding the long-term memory process by looking at the long-term storage attributes, Korea Composite Stock Price Index. The reason for the use of GPH statistic is to derive the modified statistic Korea's stock market, and to research a process of long-term memory. Research design, data, and methodology - Level shifts were subjected to be an empirical analysis by applying the GPH method. It has been modified by taking into account the daily log return of the Korea Composite Stock Price Index a. The Data, used for the stock market to analyze whether deciding the action by the long-term memory process, yield daily stock price index of the Korea Composite Stock Price Index and the rate of return a log. The studies were proceeded with long-term memory and long-term semiparametric method in deriving the long-term memory estimators. Chapter 2 examines the leading research, and Chapter 3 describes the long-term memory processes and estimation methods. GPH statistics induced modifications of statistics and discussed Whittle statistic. Chapter 4 used Korea Composite Stock Price Index to estimate the long-term memory process parameters. Chapter 6 presents the conclusions and implications. Results - If the price of the time series is generated by the abnormal process, it may be located in long-term memory by a time series. However, test results by price fixed GPH method is not followed by long-term memory process or fractional differential process. In the case of the time-series level shift, the present test method for a long-term memory processes has a considerable amount of bias, and there exists a structural change in the stock distribution market. This structural change has implications in level shift. Stratum level shift assays are not considered as shifted strata. They exist distinctly in the stock secondary market as bias, and are presented in the test statistic of non-long-term memory process. It also generates an error as a long-term memory that could lead to false results. Conclusions - Changes in long-term memory characteristics associated with level shift present the following two suggestions. One, if any impact outside is flowed for a long period of time, we can know that the long-term memory processes have characteristic of the average return gradually. When the investor makes an investment, the same reasoning applies to him in the light of the characteristics of the long-term memory. It is suggested that when investors make decisions on investment, it is necessary to consider the characters of the long-term storage in reference with causing investors to increase the uncertainty and potential. The other one is the thing which must be considered variously according to time-series. The research for price-earnings ratio and investment risk should be composed of the long-term memory characters, and it would have more predictability.

• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.240-245
• /
• 1999

The starches were isolated from normal (Mudeung) and waxy (Chalssal) hull-less barleys which contained similar contents of ${\beta}-glucan$ and amylose. Their water binding capacity, swelling power and solubility were analyzed. Scanning electron microscopy showed most starch granules had predominant lense shape granules. The particle size of starch granules was in the range of $0.1{\sim}30\;{\mu}m$. The higher pasting temperature was found for $Mudeung(84^{\circ}C)$ than for $Chalssal(61.5^{\circ}C)$. However, Mudeung barley had a lower peak viscosity(535 BU) than that of Chalssal(1,510 BU). Differential scanning calorymetry analysis showed that To and Tp for two starches were 57.0, $60.6^{\circ}C$ for Mudeung, and were 57.0 and $62.2^{\circ}C$ for Chalssal, respectively. Enthalpy changes were 7.9 and 13.2 J/g for Mudeung and Chalssal, respectively.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.92-100
• /
• 2015

Electric Vehicle (EV) can be categorized by the driving method into in-wheel and in-line types. In-wheel type EV does not have transmission shaft, differential gear and other parts that are used in conventional cars, which simplifies and lightens the structure resulting in higher efficiency. In this paper, design method for in-wheel motor for automobiles using Parameter Map is proposed, and motor with continuous power of 5 kW is designed, built and its performance is verified. To decide the capacity of the in-wheel motor that meets the automobile's requirement, Vehicle Dynamic Simulation considering the total mass of vehicle, gear efficiency, effective radius of tire, slope ratio and others is performed. Through this step, the motor's capacity is decided and initial design to determine the motor shape and size is performed. Next, the motor parameters that meet the requirement is determined using parametric design that uses parametric map. After the motor parameters are decided using parametric map, optimal design to improve THD of back EMF, cogging torque, torque ripple and other factors is performed. The final design was built, and performance analysis and verification of the proposed method is conducted by performing load test.

• The Korean Journal of Financial Management
• /
• v.8 no.2
• /
• pp.209-255
• /
• 1991

This paper develops a simple model to explain the reasons why foreign acquirers pay significantly higher premiums for U.S. target firms than do U.S. buyers. We also provide empirical work on the valuation effect of foreign takeovers and the determinants of the wealth gains of U.S. target shareholders involved in foreign takeovers. The results indicate that target wealth gains are significantly higher in foreign takeovers than in domestic takeovers, after controlling for the wealth effects of payment method, acquisition type, tax status, size and time period of bids. This confirms the valuation effect of foreign takeovers. Furthermore, the results of cross-sectional regression analysis show that the variation in U.S. target wealth gains is explained by extra tax benefits stemming from double tax deductions for acquisition-related interest expenses incurred by foreign acquirers. These findings imply that differential taxation across tax jurisdictions is the main source of the valuation effect of foreign takeovers. In addition, we find that there exists a valuation effect of the nationality of the foreign acquirers. Japanese companies pay significantly higher premiums than do non-Japanese acquirers. The finding also indicates that competition among bidders increases the abnormal returns to U.S. target shareholders in foreign takeovers.