• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2007

This paper, describes the VDR physical layer design in VDL Mode-2 in order to meet the requirements of International standards. VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. The analysis of the isolated channel from near channels, sensitivity of the receiver, dynamic range of the receiver, linear of the transmitter and energy of spurious for linear and non-linear simulation as a requirement condition of performance of VDR and teaches the course of design. The transmitting power level should be lower than 5dB from Po1dB point and the selected IF frequency is 45MHz to suppress the spurious signals. The receiver designed has 4.5dB of Noise figure, 27.52dB of Es/No, Mixer isolation up to 30dB, IIP3 power of LNA up to +10dBm to minimize the intermodulation.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.950-954
• /
• 1998

This paper describes a development of traction unit for 2-motor driven electric vehicle (EV). The traction unit is consisted with an interior permanent magnet synchronous motor (IPMSM), a reduction gear and an inverter for electric vehicle that is driven by 2 motors without differential gear. For traction unit, prototype IPMSM and inverter have been developed. The IPMSM was designed by CAD program that was developed with both equivalent circuit method and FEM. Also the inverter was developed to drive 2 motors with 6 legs IGBT switches in a control board. The vector control algorithm was implemented with maximum torque control method in the constant torque region and field weakening control method in the constant power region considering inverter capacity. To verify that the traction unit is more high efficiency and has more high power density than a traction unit with induction motor with the same power, we would like to show the results about the design and analysis of the IPMSM and the experiment results about the traction unit.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.2
• /
• pp.83-92
• /
• 2013

RSA-CRT is a widely used algorithm that provides high performance implementation of the RSA-signature algorithm. Many previous studies on each operation step have been published to verify the physical leakages of RSA-CRT when used in smart devices. This paper proposes SAED (subtraction algorithm analysis on equidistant data), which extracts sensitive information using the event information of the subtraction operation in a reduction algorithm. SAED is an attack method that uses algorithm-dependent power signal changes. An adversary can extract a key using differential power analysis (DPA) of the subtraction operation. This paper indicates the theoretical rationality of SAED, and shows that its results are better than those of other methods. According to our experiments, only 256 power traces are sufficient to acquire one block of data. We verify that this method is more efficient than those proposed in previously published studies.

• Advances in materials Research
• /
• v.5 no.1
• /
• pp.1-9
• /
• 2016

The bending problem of a functionally graded cantilever beam subjected to uniformly distributed load is investigated. The material properties of the functionally graded beam are assumed to vary continuously through the thickness, according to a power-law distribution of the volume fraction of the constituents. First, the partial differential equation, which is satisfied by the stress functions for the axisymmetric deformation problem is derived. Then, stress functions are obtained by proper manipulation. A practical example is presented to show the application of the method.

• 전기의세계
• /
• v.29 no.9
• /
• pp.599-603
• /
• 1980

Mathematically, the Electromagnetic phenomena can be represented by the Maxwell's equations, but it is very difficult to solve these equations, especially, having complex structural boundaries. By the way, the development of a computer system made us easy to solve these kind of partial differential equations. The Finite Element Method, one of the numerical methods, is very this. This paper shows the power of F.E.M. by examining, with an example of a hollow cylinder in a uniform magnetic field which is analytically solvable, the errors and the tendency of magnetic flux lines.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.127-131
• /
• 2001

스마트카드의 가장 큰 특징 중 하나로 자체적인 보안 기능을 들 수 있다. 하지만, 스마트카드는 내부의 암호 시스템이 수행될 때, 비밀키와 관련된 여러 가지 물리적인 정보를 누출하게 된다. 본 논문에서는 스마트카드의 전력 소비 신호를 이용하여, 내장된 암호 알고리듬의 비밀키를 알아내는 개선된 DPA(differential power analysis)공격을 제안한다. 제안하는 DPA공격은 SRAM에서의 데이터 상태천이를 이용하여 DPA신호의 S/N비를 높임으로써, 보다 효과적인고 강력한 DPA공격이다. 따라서 스마트카드 설계자는 이러한 점을 고려하려 시스템을 설계해야 할 것이다.

• Structural Engineering and Mechanics
• /
• v.8 no.6
• /
• pp.547-560
• /
• 1999

In this paper an asymptotic iteration method is adopted to analyze non-linear free vibration of reticulated circular plates composed of beam members placed in two orthogonal directions. For the resulting linear ordinary differential equations in the process of iteration, the power series with rapid convergence has been applied to obtain an analytical solution for non-linear characteristic relation between the amplitude and frequency of the structure. Numerical examples are given, and the phenomena indicating hardening of such structures have been presented for the (immovable or movable) simply-supported and clamped circular plates.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2003.12a
• /
• pp.274-280
• /
• 2003

최근 부채널 공격으로 스마트카드 같은 장치의 비밀키를 알아낼 수 있음이 알려지면서 많은 알고리즘에 대한 부채널 공격과 대응 방안이 연구되고 있다. DPA는 부채널 공격의 일종으로 암호화 연산 중 발생하는 전력 소모 곡선을 통계적으로 분석하여 키를 알아내는 공격이다. 한편 SEED가 국내 표준 블록 암호 알고리즘으로 널리 사용되고 있으나 SEED에 대한 DPA 연구 결과는 발표된 바가 없는 것 같다. 본 논문에서는 SEED에 DPA를 적용할 수 있음을 보이고 대응방안 예를 제시한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.340-344
• /
• 2008

In the block cipher, DPA-resistant masking methods make an appropriation of extremely high cost for the non-linear part. Block ciphers like AES and ARIA use the inversion operation as this non-linear part. This make various countermeasures be proposed for reducing the cost of masking inversion. In this paper, we propose the efficient masking inverter by rearranging the masking inversion operation over the composite field and finding duplicated multiplications.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.33-41
• /
• 2015

The kinetic analysis of energetic materials using Differential Scanning Calorimetry (DSC) is proposed. Friedman Isoconversional method is applied to DSC experiment data and AKTS software is used for analysis. The proposed kinetic scheme has considerable advantage over the standard method based on One-Dimenaionl Time to Explosion (ODTX). Reaction rate and product mass fraction simulation are conducted to validate extracted kinetic scheme. Also a slow cook-off simulation is implemented on $B/KNO_3$ for validating the applicability of the extracted kinetics scheme to a practical thermal experiment.