• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.135-141
• /
• 2013

Mechanical alloying was carried out to produce $CrSi_2$ thermoelectric compound using a mixture of elemental $Cr_{33}Si_{67}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of $CrSi_2$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry measurement. $CrSi_2$ intermetallic compound with a grain size of 70 nm could be obtained by MA of $Cr_{33}Si_{67}$ powders for 70 hours and subsequently annealed at $650^{\circ}C$. Consolidation of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $600{\sim}1000^{\circ}C$ under 60 MPa. The shrinkage of MA samples during SPS consolidation process increased gradually with increasing temperature up to $1000^{\circ}C$ and relatively significant at about $600^{\circ}C$. We tend to believe that these behaviors are deeply related to form a $CrSi_2$ compound during heating process, as can be realized from the DSC measurement. Electrical conductivity and Seebeck coefficient of sintered bodies were measured up to $900^{\circ}C$. Seebeck coefficient and power factor of $Cr_{33}Si_{67}$ compact prepared by MA and SPS at $1000^{\circ}C$ showed the maximum value of $125{\mu}V/K$ at $400^{\circ}C$ and $4.3{\times}10^{-4}W/mK^2$ at $350^{\circ}C$, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.453-460
• /
• 2004

To prevent penetration of rainwater into the landfill site is the main purpose of the final cover in landfill sites. Conventional designs of landfill covers uses geotextiles such as geomembrane and GCL, and clay liners to lower the permeability of final covers of landfill sites. However, differential settlement and the variation of temperature in landfill sites cause the development of cracks or structural damage inside the final cover and it is also difficult to obtain clay - the main material of the compacted clay liner in Korea. Thus the former final cover system that suggests geomembrane and GCL or compacted clay liner has several limitations. Therefore, an alternative method is necessary and one of them is the application of SRSL(self-Recovering Sustainable Liner) material. SRSL is two different layers consist of individual materials that react with each other and form precipitates, and with this process lowers the permeability of the landfill final cover. SRSL generally is made up of two layers, so that when a internal crack occurs the reactants of the two layers migrate towards the crack and heal it by forming another liner. In this study the applicability of SRSL material for landfill final cover was examined by performing; (1) jar test to verify the formation of precipitate in the mixture of each reactants, (2) falling head test considering the field stress in order to confirm the decrease of permeability or prove that the hydraulic condctivity is lower than the regulations, (3) compression tests to judge weather if the strength satisfies the restricts for landfills, (4) freeze/thaw test to check the applicability of SRSL for domestic climate. In addition, the application of waste materials in the environmental and economical aspect was inspected, and finally the possibility of secondary contamination due to the waste materials was examined by performing elution tests.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.353-360
• /
• 2003

Immunodepression can be required for entomopathogenic bacteria to induce their potent pathogenicities to the target insects. Here, we raise a hypothesis that the capacity of a pathogenic bacterium to induce the target insect immunodepression has positive relationship with the degree of pathogenicity. X. nematophilus had 1,200 times as potent as another entomopathogenic bacterium, Staphylococcus gallinarum against the fifth instar larvae of silkworm, Bombyx mori, when they were Injected into the hemocoel. Although both bacteria had significant cytotokic effect on the hemocytes of B. mori, X. nematophilus gave faster and greater cytotoxicity than did S. gallinarum. In cellular immune reactions, B. mori could form 20 hemocyte nodules against the bacterial injection with 5${\times}$10$\^$5/ cells. The number of the hemocyte nodules was significantly depressed when live X. nematophilus was inject-ed, but not in S. gallinarum. Activation of prophenoloxidase (proPO) was depressed in the bacterial injection. The depression of PO activation was significantly greater in X. nematophilus infection than in S. gallinarum injection. Lysozyme activity was induced by the injection of S. gallinarum at 4 h after the treatment, but not induced in X. nematophilus at all the time. These results showed that X. nemato-philus induced greater immunodepression against B. mori and resulted in higher pathogenicity than did S. gallinarum. Therefore, this study suggests that the immunodepression induced by entomopathogenic bacteria has positive relationship with their pathogenicity.

• Journal of Life Science
• /
• v.18 no.11
• /
• pp.1606-1611
• /
• 2008

Outer membrane proteins (OMPs) expressed in the Gram negative bacteria such as Salmonella play multiple functions including material transports, adhesive factors and reception of external signals. This study has been focused on an OmpW protein known as a protein required to form a hydrophobic porin in outer membrane. We have constructed a S. typhimurium CK10 mutant deleting an ompW gene on chromosome. The CK10 strain was more tolerant to SDS than the wild-type strain did. As increase of salt concentration in the culture media, significantly decreased amount of OmpW protein in cells were detected. The maximum OmpW protein was expressed in the absence of salt supplement. However, the growth of CK10 strain was indistinguishable compared to that of the wild-type strain at the variable osmotic conditions. The biological role of differential OmpW expression in response to osmotic conditions remains to be investigated.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.545-552
• /
• 1991

A mercury ion-sensitive carbon-paste electrode (CPE) was constructed with l-sparteine. Mercury (II) ion was chemically deposited by the complexation with l-sparteine onto the CPE. The surface of CPEs was characterized by cyclic voltammetry and anodic stripping voltammetry in an acetate buffer solution, separately. Exposure of CPEs to acid solution could regenerate surface and reuse it for deposition. In 5 deposition/measurement/regeneration cycle, the response was reproducible and in licnear up to $2.0\;{\times}\;10^{-6}$ M with linear sweep voltammetry. In case of using the differential pulse technique, we have obtained the linear response up to $7.0 {\times}10^{-7}$ M with relative standard deviation of ${\pm}5.1$%. The detection limit was $5.0{\times}10^{-7}$ M for 20 minutes of the deposition. We have investigated the interference effect of various metal ions, which are expected to form the complex with ligand. Silver (I) ion of these has interfered with the analysis of Hg (II) ions. However, pretreatment of the silver (I) ion with potassium chloride led to no interference on the analysis of mercury ions in aqueous solution.

• Korean Journal of Weed Science
• /
• v.16 no.1
• /
• pp.42-53
• /
• 1996

The tolerant and susceptible rice cultivars to oxyfluorfen were selected from 400 rice cultivars in a laboratory, and tested in comparison with barnyardgrass, a typical oxyfluorfen susceptible weed. The responses to oxyfluorfen in the different levels of calli, cells and protoplasts of the rice cultivars were investigated. $I_{50}$ value of the tolerant rice cultivars was about $10^{-4}M$, whereas that of the susceptible rice cultivars and barnyardgrass was about $10^{-6}M$, showing significant difference between the two groups. The growth rate of calli segregated from the tolerant rice cultivars was higher than that from the susceptible rice cultivars and barnyardgrass by treatment of oxyfluorfen to the calli. The growth rate of suspension-cultured cells of the tolerant rice cultivars was higher than that of the susceptible rice cultivars and barnyardgrass after treatment of oxyfluorfen. The viability of protoplasts from the tolerant rice cultivars was higher than that from the susceptible rice cultivars and barnyardgrass after one or two hours of oxyfluorfen treatment. The intactness of protoplasts from the tolerant rice cultivars was also higher than that form the susceptible rice cultivars and barnyardgrass.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.5
• /
• pp.91-99
• /
• 1998

The widespread use of thin shell structures has created a need for a systematic method of analysis which can adequately account for arbitrary geometric form and boundary conditions as well as arbitrary general type of loading. Therefore, the stress and analysis of thin shell has been one of the more challenging areas of structural mechanics. A wide variety of numerical methods have been applied to the governing differential equations for spherical and cylindrical structures with a few results applicable to practice. The analysis of axisymmetric spherical shell is almost an every day occurrence in many industrial applications. A reliable and accurate finite element analysis procedure for such structures was needed. Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometry changes on the response is also significant in many cases. Therefore both material and geometric nonlinear effects should be considered. In general, the shell structures designed according to quasi-static analysis may fail under conditions of dynamic loading. For a more realistic prediction on the load carrying capacity of these shell, in addition to the dynamic effect, consideration should also include other factors such as nonlinearities in both material and geometry since these factors, in different manner, may also affect the magnitude of this capacity. The objective of this paper is to demonstrate the dynamic characteristics of spherical shell. For these purposes, the spherical shell subjected to uniformly distributed step load was analyzed for its large displacements elasto-viscoplastic static and dynamic response. Geometrically nonlinear behaviour is taken into account using a Total Lagrangian formulation and the material behaviour is assumed to elasto-viscoplastic model highly corresponding to the real behaviour of the material. The results for the dynamic characteristics of spherical shell in the cases under various conditions of base-radius/central height(a/H) and thickness/shell radius(t/R) were summarized as follows : The dynamic characteristics with a/H. 1) AS the a/H increases, the amplitude of displacement in creased. 2) The values of displacement dynamic magnification factor (DMF) were ranges from 2.9 to 6.3 in the crown of shell and the values of factor in the mid-point of shell were ranged from 1.8 to 2.6. 3) As the a/H increases, the values of DMF in the crown of shell is decreased rapidly but the values of DMF in mid-point shell is increased gradually. 4) The values of DMF of hoop-stresses were range from 3.6 to 6.8 in the crown of shell and the values of factor in the mid-point of shell were ranged from 2.3 to 2.6, and the values of DMF of stress were larger than that of displacement. The dynamic characteristics with t/R. 5) With the thickness of shell decreases, the amplitude of the displacement and the period increased. 6) The values of DMF of the displacement were ranged from 2.8 to 3.6 in the crown of shell and the values of factor in the mid-point of shell were ranged from 2.1 to 2.2.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.464-473
• /
• 2008

Winter migratory birds gather in paddy rice fields to feed shed rice grains. The Korean Ministry of Environment has practiced a policy program Contract on Paddy Field Management (CPFM) during winter fallow since 2002. This program starts with a contract between local governments and farmers, and the government pays a differential subsidy to farmers who finish spreading rice straw, cultivating barley, letting the whole rice plant without harvest, and submerging paddy fields for winter migratory birds. As more local governments have operated CPFM program, the total area on the contract and subsidy budget has increased yearly since 2002. This program could have its stable position as a successful policy by giving profits to farmers. With the program extended, the population of winter migratory birds has been greatly. For the evaluation of environmental performance of a policy, we analyzed this CPFM program by introducing some indicators in the form of Driving Force-State-Response Framework. The indicators were composed of 3 categorized indicators; the area of paddy land contracted under this program as 'driving force' indicator, population of birds, the number of bird species and the amount of feces as 'state' indicators, and the size of monetary support, the number of farmers or local governments participating, and public perception as 'response' indicators. The contract area of paddy field under CPFM could be a good biodiversity indicator reflecting potential performance of this policy measure in the light of its linkage to the population of winter migratory birds. And the share of CPFM land of the whole agricultural land might also be used as a useful indicator of policy evaluation for improvement of wildlife diversity. The 'state' indicators such as population of birds and the number of bird species could be matched to 'driving force' indicator, but the total CPFM area of each site could not reflect the effect of areas under different management practices. However, the amount of bird feces could reflect differences in environmental performance with management practices as 'state' indicators. The development of indicators indicating 'response' such as farmers' behavior, public perception, and policy makers' willingness is also needed to support a successful implementation and improvement of this policy measure with the development of 'performance' indicators integrating all these indicators.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.554-558
• /
• 2008

$(1-x)SiO_2-(x)TiO_2$ composite fibers with various compositions of $TiO_2$ were prepared by electrospinning their sol-gel precursors of titanium (IV) iso-propoxide (TiP), and tetraethyl orthosilicate (TEOS). The surface morphology and structure of sintered composite fibers were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) and Fourier transform infrared spectroscopy (FT-IR). As the content of $TiO_2$ in $(1-x)SiO_2-(x)TiO_2$ system was increased the average diameter of composite fibers was proportionally increased. Also, the transformation of $TiO_2$ from anatase to rutile form was inhibited by the highly dispersed $TiO_2$ around $SiO_2$ particles up to $0.6SiO_2-0.4TiO_2$ composite fibers even after calcination at $1000^{\circ}C$. The photocatalytic activity of $SiO_2-TiO_2$ composite fibers was examined for the methylene blue (MB) decomposition which was confirmed using UV-vis/DRS spectra. The experiments demonstrated that the MB in aqueous solution was successfully photodegraded using $SiO_2-TiO_2$ composite nanofibers under UV-visible light irradiation.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2005

High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.