• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.24-39
• /
• 2000

Various methods and graft materials have been used to fill in the defect adjacent to the implants and considered as clinically acceptable. But it is not clear whether the regenerated bone increases the implant-bone contact and supports the implant. The purpose of this study is to evaluate regenerated bone surrounding implants using bone morphogenetic protein(BMP) and demineralized freeze-dried bone(DFDB), and the interfaces between implants and regenerated bone. bBMP was extracted and partially purified from the bovine bone matrix using heparine chromatography. Demineralized freeze-dried bone was made from the dog. Inactive insoluble collagenous bone matrix(IBM) of dog was used as carrier of bBMP. Interfaces of titanium coated epoxy resin implants were processed for demineralized section for transmission electron microscopy(TEM) and those of screw type implants were for nondemineralized section for light and fluoromicroscopic examination. Implants were inserted in the inferior border of mandible of adult dogs and artificial bony defects($3{\times}3{\times}4mm$) were made at the mesial and distal side of implants. Defects were filled with BMP(BMP group) and DFDB(DFDB group). For the fluoromicroscopic examination, the fluorescent dyes(oxytetracycline, calcein green, alizarin red) were injected 2, 4, 6, 8, 12 weeks after implantation. The experimental animals were sacrificed at the 6th and the 12th week and their mandible were extirpated and processed for examination with light microscopy, fluoromicroscopy and TEM. The obtained results were as follows : 1. By the light microscopic findings, the defects were filled with woven bone at the 6th week and compact bone at the 12th week, and the osseointegrations were seen in both groups. There was no histological difference between them. 2. On the basis of the histomorphometric analysis, BMP group(6th week: 40.25%, 12th week: 56.04%) had higher bony contact ratio than DFDB group(38.37%, 42.63%). There was significant difference between two groups at the 12th week(p<0.05). 3. The amount of bone formation in BMP group was more prominent than in DFDB group. Significant difference was noted among two groups at the 6th and the 8th week(p<0.05). 4. By the transmission electron microscopic findings, $0.4-2{\mu}m$ soft tissue layer was found in adjacent to the interfaces and over the collagen fibrils of bone at the 6th week. However, about 100nm amorphous layer was noted at the interface or collagen fibrils directly extended to the titanium surface at the 12th week. There was no significant difference between two groups. 5. These results suggest that BMP and DFDB can be used as good graft materials in the regeneration of bone adjacent to implant, and BMP is more valuable as a bone inducer than DFDB.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.467-477
• /
• 2017

The purpose of this study is to present the ranking and difference of the importance and satisfaction of the swimsuit brand image that the swimsuit consumers perceive through the IPA and to provide the implications for the activation of the swimsuit industry market by diagramming it with the IPA matrix. To do this, we analyzed 298 questionnaire data for university students and graduate students and the following conclusions were drawn through the ranking of importance, satisfaction, and the corresponding sample t-test and IPA matrix. First, as a result of examining the ranking through the average of the importance and satisfaction of the swimsuit brand image, the importance showed average 4.0 or more in order of 'quality', 'functionality', 'price', 'design', 'trust', 'color', and the satisfaction showed average 3.5 or more in order of 'trust', 'quality', 'functionality' and 'awareness'. Second, as a result of difference verification in swimsuit brand image, it showed a significant difference in order of 'quality', 'price', 'functionality', 'design', 'color', 'trust', 'sophistication'. On the other hand, it showed no significant difference of cognitive images. Third, as a result of IPA of swimsuit brand image, the factors of 'design', 'functional', 'quality' and 'trust' were included in I quadrant, 'price' 'color' in II quadrant, 'advertising image', 'event', 'popularity', 'originality' in III quadrant, and 'awareness', 'sophistication' in IV quadrant.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.207-219
• /
• 2014

Three-dimensional (3D) culture system is useful technique for study of in vivo environment and it was used various experiments. This study was investigated to establish of embryo co-culture system and changes of PAs activity in 3D cultured endometrial cells of pigs. In results, growth of stromal cells into gel matrix were detected only with endometrial and myometrial cells. The most rapid growth of stromal cells were confirmed in $2.5{\times}10^5cells/ml$ and gel matrix containing 15% FBS. Expression of urokinase-PA (uPA) after treatment of hCG (0.5, 1.0, 1.5 and 2.0 IU/ml) were higher than without hCG, but, there are not significant difference among the treatment. On the other hand, expression of uPA after treatment of $IL-1{\beta}$ (0.1, 1, 10 and 100 ng/ml) were higher than without $IL-1{\beta}$, but, there are not significant difference. Expression of uPA after treatment of estrogen (0.2, 2, 20 and 200 ng/ml) were not difference, but PA activity was significantly decreased (p<0.05). Blastocyst was producing in PZM-3 medium containing FBS and endometrial cells were grown in PZM-3 medium. When embryos development with cultured endometrial cells, cleavage rates were not significant difference and blastocyst were not produced in co-culture with stromal cells and 3D culture system. 3D culture system had similar activity to in vivo tissue and these features are very useful for study of in vivo physiology. Nevertheless 3D culture system was not proper in embryo co-culture system. Therefore, we suggest that 3D culture system with embryo co-culture need continuous research.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.60-67
• /
• 2003

The perceptual change and reproduction process of a space is distinguished from the difference between the Modem Times and the digitalized Post-modem Times. According to this changing aspect, the dwelling. concept is also progressed toward the escapeness from the regularly standardized settlement. But, as written above, the escapable dwelling behavior pattern is re-territorizated through new restriction and domination system. Among the newly re-territorized dwelling areas, the virtual space that included human being's equal in the contemporary meaning has already been on the surface in our daily life, it has been enlarging into all kinds of activity. The virtual space has the possibility to extend beyond a already well-used to physical space and time unlimitedly. But, owing to the ambiguous boundary between the real space and the virtual space, it is getting more important to define the spatial substance in the Digital Age. From now on, especially, the academical fields like a Architecture and a Interior Design that dealed with a living space have to give it a great shot. What I really want to say is that various approach about the space itself with the help of many sorts of so-called a Case Study could be a diversity & uniqueness out of a typical point of view about the study handling on space and time.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.79-88
• /
• 1997

Very stiff floor system in a residential-commercial building causes some problems in the numerical analysis procedure due to significant difference in stiffness with adjacent elements. Static analysis of structure with a stiff transfer-floor can be performed approximately in two steps for upper and lower parts for the structure. However, it is impossible to perform dynamic analysis in two steps with separate models. An efficient method for dynamic analysis of a structure with a right floor system is proposd in this study. The matrix condensation technique is employed to reduce the degree of freedom for upper and lower parts of the structure and a beam elements with rigid bodies at both ends are introduce to model the rigid floor system. Efficiency and accuracy of the proposed method are verified through analysis of several example structures.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.159-162
• /
• 2000

Interfacial and microfailure properties of carbon fiber/epoxy matrix composites were evaluated using both tensile fragmentation and compressive Broutman tests with acoustic emission (AE). Amino-silane and maleic anhydride polymeric coupling agents were used via the dipping and electrodeposition (ED), respectively. Both coupling agents exhibited higher improvements in interfacial shear strength (IFSS) under tensile tests than compressive cases. However, ED treatment showed higher IFSS improvement than dipping case under both tensile and compressive test. The typical microfailure modes including fiber break, matrix cracking, and interlayer failure were observed during tensile test, whereas the diagonal slippage in fiber ends was observed during compressive test. For both the untreated and treated cases AE distributions were separated well under tensile testing. On the other hand, AE distributions were rather closer under compressive tests because of the difference in failure energies between tensile and compressive loading. Under both loading conditions, fiber breaks occurred around just before and after yielding point. Maximum AE voltage fur the waveform of carbon or basalt fiber breakage under tensile tests exhibited much larger than those under compressive tests.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.769-776
• /
• 2014

It is necessary to detect the feature points existing simultaneously in both images and then find the corresponding relationship between the detected feature points. We propose a new feature detector based on geometric mean of two eigenvalues of gradient matrix which is able to measure the change of pixel intensities. The corner response of the proposed detector is proportional to the geometric mean and also the difference of two eigenvalues in the case of same geometric mean. We analyzed the localization error of the feature detection using aerial image and artificial image with various types of corners. The localization error of the proposed detector was smaller than that of the typical corner detector, Harris detector.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.189-194
• /
• 2003

Interfacial evaluation, damage sensing and cure monitoring of single carbon fiber/thermo setting composite with different curing processes were investigated using electro-micromechanical test. After curing, the residual stress was monitored by measurement of electrical resistance and then compared to various curing processes. In thermal curing case, matrix tensile strength, modulus and interfacial shear strength were higher than those of ultraviolet curing case. The shrinkage measured during thermal curing occurred significantly by matrix shrinkage and residual stress due to the difference in thermal expansion coefficient. The apparent modulus measured in the thermal curing indicated that mechanical and interfacial properties were highly improved. The reaching time to the same stress of thermal curing was faster than that of UV curing case.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.201-209
• /
• 2003

DC and AC electrical conductivity and electromagnetic interference shielding effectiveness of milled carbon fiber/nylon composites were investigated with the kind of nylon matrix. Percolation transition at which the conductivity is sharply increased was observed at about 7 vol% of milled carbon fiber. Nylon 46 as a matrix was more effective to obtain high electrical conductivity than nylon 6, and the difference in conductivity was occurred by the treatment of coupling agent. Frequency dependence of AC conductivity could be explained by relaxation phenomenon at just below percolation and resonance phenomenon at 40 vol% of carbon fiber, respectively. Negative temperature coefficient phenomenon was found in all composites. Electromagnetic interference shielding effectiveness was increased with the concentration of carbon fiber. At a high conductivity region the return loss was more dominant to the total shielding effectiveness than the absorption loss.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.599-604
• /
• 2011

A highly strained nanostructure comprising crystallographically aligned HgTe nanoinclusions and a surrounding PbTe matrix has been synthesized using a precipitation process of supersaturated HgTe-PbTe alloys. From the early precipitation stage, HgTe nanoinclusions take disk shape, which is transformed from initial HgTe nuclei, although there is no lattice constant difference of the two end components at standard state. As a primary reason for the morphological transformation of the initial spherical HgTe nuclei to HgTe nanodisks, the induced lattice mismatch is suggested. On the condition that the HgTe nanodisks maintain perfect coherent nature with PbTe matrix, the stress-free lattice constant of constrained HgTe nanodisks has been calculated based on the defined concept of the strain-induced tetragonality, the linear elasticity and the actual measurement in HRTEM images.