• The Research Journal of the Costume Culture
• /
• v.4 no.3
• /
• pp.373-381
• /
• 1996

Draping design system organized by European about 13C has been developed greatly for a long while, but for the purpose of the practical use the Dress form similar to human body has been needed. In order to make three-dimensional effect as fitting Muslin ot the Dress form. the Basic lien has to be established in Muslin and Dress form each. At this time, Shoulder-blade level is indicated from various angles : measure down 10cm from the back neck point, a quarter of the back neck point to the waist lie, the half-way point between neckline and bust line, measure down 41 inches from the back neck line, measure down 3 inches from the top edge of the muslin at center back and cross mark for neck line, and so forth. This study established the Basic line through the two ways of them (B.N.P∼B.L/2, B.N.P∼W.L/4), did tight fitting to the 5 kinds of Dress forms which ar normal type in the drop value(the difference between hip circumference and bust circumference), and acquired Basic Pattern. After the experiment, fitness are throughly investigate by statistical analysis of measurements. As a result, this study finds out that fit is proper when shoulder blade level is situated on a fourth of the back neck point to the waist line and a quarter point between back neck point and waist line, and waist dart is situated on the back center line and princess line.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.3 s.16
• /
• pp.15-24
• /
• 2002

This paper presents an experimental study on the unsteady flow phenomena such as leakage flow and rotating stall which have influences on the performance and stability of an axial flow fan. For this study, unsteady pressure were measured using high frequency pressure transducers mounted on the easing wall of rotor passage and analyzed by Double Phase-Locked Averaging Technique. As the flow rate was reduced to near stall point, the pressure difference between the pressure and the suction side of the blade was increased especially new the leading edge and the lowest pressure zone of suction side was gradually developed. From the result of unsteady pressure field on the casing wall, one period of rotating stall was divided into three zones and the flow characteristics on each zone were described in detail.

• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.67-80
• /
• 1989

The author studied the changes of muscle activity with Bioelectric processor Model EM2(Myotronics Corp., USA) before and after occlusal stabilization splint therapy. For this study, 15 temporomandibular disorders patients and 15 students without any temporomandibular disorders symptoms were selected, for experimental group and control group, respectively. Experimental group were treated with occlusal stabilization splint and checked about electromyographic activity before and after therapy. Electromyographic levels were measured in both groups at the following mandibular position, i.e., physiologic rest, tapping, light biting, hard open without pain, open with pain, right excursion and ipsilateral biting, left excursion and ipsilateral biting, protrusion, protrusive biting, edge biting and physiologic rest after movement. The obtained results were as follows : 1. In experimental group, post-treatment mean values of muscle activity were lower than pretreatment values. 2. In general, the pre-treatment mean values of muscle activity in experimental group were higher than those of control group. 3. In experimental group, no statistically significant difference appeared between affected and unaffected side. 4. The mean value of muscle activity in physiologic rest position after each movement check was lower than that before each movement check.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1493-1496
• /
• 2005

In this paper, we describe a simple, precise and low cost method of fabricating PDMS stamp for UV embossing. It is important to improve the replication quality of stamp because the accuracy of fabricated structure is related to that of the stamp in UV embossing. The PDMS stamp has been fabricated by the replica molding technology with ultrasonic vibration to eliminate micro-air bubbles during the fabrication process of PDMS stamp. Also, this fabrication to use ultrasonic vibration promotes PDMS solution to fill into micro channel and edge parts. We report the fabrication of an optical core using UV embossing with fabricated PDMS stamp. This fabricated core is $7\;\mu{m}\;at\;depth,\;6\;\mu{m}\;at\;width.\;This\;measured\;value\;has\;the\;difference\;below\;1\;\mu{m}$compared to the original stamp. The surface roughness of core is about 14 nm root mean square. This is satisfactory value to use low-loss optical waveguide. Our successful demonstration of precise replica technology presents an alternative approach for the stamp of UV embossing.

• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.148-152
• /
• 2003

We have observed the temperature dependences of Bi $L_{III}$ edge spectra by extended X-ray absorption spectroscopy for a high quality single crystal and a powder of the $Ba_{0.6}K_{0.4}BiO_3$ superconductor. $Ba_{0.6}K_{0.4}BiO_3$ has the cubic structure and metallic states. The deformation of the $BiO_{6}$ octahedra, which is due to the anomalies of the Bi-O and Bi-Ba bond length, was showed by the double-shell fit. It was clearly found that these anomalies are owing to the difference in the strength of Bi-O bonds. The temperature dependences of both bond lengths and the Debye-Walter factor ${\sigma}^2$ of the Bi-O and Bi-(Ba,K) bond are discussed to illustrate local structural features of the $Ba_{0.6}K_{0.4}BiO_3$

• Fashion & Textile Research Journal
• /
• v.7 no.6
• /
• pp.673-679
• /
• 2005

This study surveys the fabric surface properties such as mean value of the coefficient of friction(MIU), mean deviation of the coefficient of friction(MMD) and mean deviation of surface roughness(SMD) due to warp and weft tension differences using KES-FB system. For this purpose, fabric is designed as 5 harness Satin weave using 150d/48f warp and 200d/384f weft polyester filaments, and is woven by Omega$^{(R)}$ rapier loom by Textec Co.Ltd and Vamatex-P1001ES$^{(R)}$ rapier loom by Vamatex Co.Ltd respectively. These grey fabrics are processed on the same dyeing and finishing processes. The fabric surface properties according to the weaving looms are analysed with warp and weft weaving tensions. And also surveyed the difference of fabric surface properties according to the fabric positions such as center and each edge of fabrics for the sensitive garment. Fabric thickness was also measured and discussed according to the fabric positions such as center and each of fabrics with two looms weaving tensons.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.627-634
• /
• 2009

Redefining the difference among the Yamaguchi's 'so-called Yeoncheon system,' north Korean's 'Rimjin System' and Yeoncheon Group of national geological map, authors tried to avoid a possible misunderstanding of concept between Yeoncheon Group and Imjingang fold Belt. As a tool of preliminary geological mapping and or N-S reconnaissance of the whole Yeoncheon Group, an interpretation technique of satellite image from various angles has been applied to understand the geometrical attitude of strike and dip of random spot, and a further concept like as cross section.

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.197-209
• /
• 2009

Stereoscopic video delivers depth perception to users contrary to 2D video. Therefore, we need to develop a new video quality assessment model for stereoscopic video. In this paper, we propose a new method for objective assessment of stereoscopic video. The proposed method detects blocking artifacts and degradation in edge regions such as in conventional video quality assessment model. And it detects video quality difference between views using depth information for efficient quality prediction. We performed subjective assessment of stereoscopic video to check the performance of the proposed method, and we confirmed that the proposed algorithm is superior to the existing method in PSNR in respect to correlation with results of the subjective assessment.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.39-42
• /
• 1994

An automatic multi-threshold algorithm for segmentation of 2D ultrasound images based on average filtering and the characteristics of speckle noise in 2D ultrasound image is proposed. To do this, we investigate the histogram of difference between $7{\times}7$ averaging histogram and $3{\times}3$ averaging histogram. And, we find zero crossing points in the positive portion of the differenced histogram and select middle points of the zero crossing points. We assign these selected points to characteristic points. The thresholds are the center of two characteristic points. Then we segment 2D ultrasound image by using these thresholds and extract edges from applying edge operator to optimal segmented image. Experimental results show that the segmented regions are devided accurately around the homogeneous region.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.625-630
• /
• 2016

Recently, various types of image contents are being produced, and interest in copyright protection technology is increasing. In this paper, we propose an image encryption technology for color images. This technique divides the image into RGB color components and then performs quad-tree decomposition based on the edge of image. After the quad-tree partitioning, encryption is performed on the selected blocks. Encryption is performed on color components to measure encryption efficiency, and encryption efficiency is measured even after reconstitution into a color image. The encryption efficiency uses a visual measurement method and an objective image quality evaluation method. The PSNR values were measured as 7~10 dB for color difference components and 16~19 dB for color images. The proposed image encryption technology will be used to protect copyright of various digital image contents in the future.