• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.222-223
• /
• 2005

The Any failure of piston of marine diesel engine must be regarded as serious, and any steps which can be taken to prevent such failure are desirable. The purposes of this study is to investigate and to analyse the failure causes of piston of marine diesel engine. If this paper has accomplished that end it can be counted as being of some slight value to the marine industry.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.187-191
• /
• 2001

Diesel locomotive engine is the main source of train noise in these days but hard to reduce the level by barrier for it emitted from high location. For the passing high level noise properties of diesel locomotive engine, there are needs of changing the environmental railway limit to maximum level from equivalent. In this study we investigate the noise characteristics of the diesel electric locomotive according to the change of notch. From the result we found out the frequency of engine cycle noise and the shape of noise spectrum.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.240-246
• /
• 2001

The main objective of the study is to provide the criteria for determining the proper life cycle of rebuiled diesel-electric locomotive currently being operated in KNR. We predicted the most critical sections of the cast-iron bogie and tested the diesel-electric locomotive vehicle to measure dynamic stresses applied to the bogie. The fileld test of the diesel-electric locomotive estimated 9.90years based on the fatigue-life estimation when they are continuously used in the present operation condition.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.211-217
• /
• 2007

The Diesel Multiple Units (DMU) is a successful mass transportation system, that is being, continuously, on demand by train operators and railway authorities around the globe. One of its advantages is the fact that a diesel engine, along with the correct propulsion and control equipment. This paper describes a study on the Power Pack developed for Ireland DMU to help comprehensive concept of Diesel Propulsion System.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2002년도 춘계학술대회 논문집
• /
• pp.229-230
• /
• 2002

Diesel exhaust particles are mostly sub-micrometer agglomerates composed of carbonaceous primary particles ranging from 10 to 80nm, but contain also adsorbed or condensed hydrocarbons, hydrocarbon derivatives, sulfur compounds, and other materials. If particles are primarily composed of volatile materials, they have different health impacts from solid particles. Thus, the analysis of the volatility of diesel particles is one of an important diesel research area. (omitted)

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.693-699
• /
• 1999

In this paper author develops digital governor for medium speed diesel engine. The system is composed of MPU main control module RPM measuring module PWM driving module driver module for F.O. rack drive motor key pad and display module. Experiment results of speed control on 6cyl 1800pm 250kw Daewoo MAN diesel erigine were satisfied for design speci-fications and system could be developed for commercial usage after taking more experiments and endurance tests under various environments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.640-646
• /
• 2001

The torsional vibration monitoring system(TVM) for large diesel engines was developed and applied by manufacturers of torsional vibration damper, flexible coupling and diesel engine since 1990s. And demands of TVM have been steadily increased to operate safely engine and to extend maintenance interval of damper and flexible coupling. In this paper, the experimental methods and algorithms of TVM development which used the existing PC, turning wheel and speed sensors in ship are introduced.

• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.21-27
• /
• 2015

Hydrogen production from commercial diesel fuels is an attactive option for energy generation purpose due to the low cost and good availability of diesel fuels. However, in order to utilize commercial diesel fuels, the sulfur contents must be removed down to approximately 0.1 ppm level to protect the fuel cell catalysts from poisoning. Commercial catalysts $CoMo/Al_2O_3$ and $NiMo/Al_2O_3$ were tested for HDS (Hydrodesulfurization) of model diesel and commercial diesel. The experimental conditions were $250-400^{\circ}C$ and LHSV (Liquid Hourly Space Velocity) $0.27-2.12hr^{-1}$. $NiMo/Al_2O_3$ was found to be more effective than $CoMo/Al_2O_3$ in removing sulfur from model diesel. Based on the experimental results of model diesel, commercial diesel fuel purchased from a local petrol station was tested for HDS using $NiMo/Al_2O_3$. The GC-SCD (Gas Chromatography Sulfur Chemiluminescence Detector) results showed that the DMDBT (Dimethyldibenzothiophene) derivatives were fully removed from the commercial diesel fuel proving that HDS with $NiMo/Al_2O_3$ is technically feasible for industrial applications.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.762-767
• /
• 2016

디젤엔진은 다른 엔진과 비교했을 때 열효율이 높고 다양한 연료를 사용할 수 있다는 장점을 가지고 있다. 하지만, 대기오염을 유발하는 배기배출물이 발생한다는 단점도 가지고 있다. 따라서 전 세계적으로 디젤엔진을 사용하는 승용차 및 상용차, 선박 등에 대한 국제규정인 EU Euro 6, IMO MEPC Tier 3 및 US EPA Tier 4 등의 대기환경오염법이 더욱 엄격해져가고 있다. 본 연구에서는 경유를 사용하는 발전용 4행정 디젤엔진을 실험 대상으로 하였으며, 유용성 Ca계 유기금속화합물을 경유에 투입하여 실험 결과를 비교, 분석하였다. Ryu et al. 논문에서는 2행정 디젤엔진에 연료첨가제를 적용했던 연구결과를 발표하였다. 본 논문에서는 4행정 디젤엔진에 연료첨가제를 투입하여 엔진의 성능 및 배기배출물 개선에 대해서 실험을 실시하였다. 본 연구를 통해서 2행정과 4행정 디젤엔진 모두에 연료첨가제를 적용하여 그 결과를 고찰해 볼 수 있었으며 유용성 Ca계 유기금속화합물 연료첨가제가 디젤엔진의 성능(연료소비율, 배기온도) 및 배기배출물(질소 산화물, 일산화탄소)을 개선시킬 수 있음을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.533-540
• /
• 2014

The remanufacturing industry for automotive parts is a major issue which affects the environment protection and CO2 reduction throughout the world. Beside this, remanufacturing technologies of worn-out diesel engines have been developing to make as close to new as possible. In this study, the characteristics of the engine-power output and exhaust emissions of remanufactured diesel engine by hydrogen enrichment are evaluated by measuring the engine and vehicle test. Moreover, with worn-out diesel engine and first generation common-rail engine, we compared by testing their characteristics, resulting in the restoration of engine-power output more than 93%, as well as marvelously reduces the THC and NOx emission. At a guess, high pressure injection of diesel increases fuel atomization characteristics with excellence combustion efficiency, resulting in reduction of THC emission. Also, rapid cooling of EGR decreases combustion temperature, resulting in reduction of NOx emission. Consequently, these remanufacturing for diesel engine enables worn-out diesel engine to have restoration to the original state. Simultaneously achieved 2 goals called that CO2 emission reduction and protection of environment by remanufacturing engine.